Merge tag 'davinci-for-v3.12/soc' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/nsekhar/linux-davinci into next/soc

From Sekhar Nori:

DaVinci SoC updates for v3.12
-----------------------------

This set of SoC updates contains changes to the
way UART clock is handled to enabled DT-boot to
obtain UART clock frequency instead of relying
on DT-binding being supplied. Similarly handling
of MDIO clock is fixed to make it easier to support
MDIO in DT-boot. Finally there is patch to remove
now unnecessary setting of wake-up capable flag for
RTC.

* tag 'davinci-for-v3.12/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: fix clock lookup for mdio device
  ARM: davinci: da8xx: remove hard coding of rtc device wakeup
  ARM: davinci: serial: remove davinci_serial_setup_clk()
  ARM: davinci: serial: get rid of davinci_uart_config
  ARM: davinci: da8xx: remove da8xx_uart_clk_enable
  ARM: davinci: uart: move to devid based clk_get

Signed-off-by: Kevin Hilman <khilman@linaro.org>

arch/arm/mach-davinci/board-da830-evm.c

@@ -185,10 +185,6 @@ static __init void da830_evm_usb_init(void)
 			   __func__, ret);
 }
 
-static struct davinci_uart_config da830_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static const short da830_evm_mcasp1_pins[] = {
 	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
 	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
@@ -630,7 +626,7 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);
 
-	davinci_serial_init(&da830_evm_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 

arch/arm/mach-davinci/board-da850-evm.c

@@ -746,10 +746,6 @@ static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_delay	= 0,	/* usec */
 };
 
-static struct davinci_uart_config da850_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -1494,7 +1490,7 @@ static __init void da850_evm_init(void)
 				__func__, ret);
 	}
 
-	davinci_serial_init(&da850_evm_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	i2c_register_board_info(1, da850_evm_i2c_devices,
 			ARRAY_SIZE(da850_evm_i2c_devices));

arch/arm/mach-davinci/board-dm355-evm.c

@@ -314,10 +314,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm355_evm_map_io(void)
 {
 	dm355_init();
@@ -393,7 +389,7 @@ static __init void dm355_evm_init(void)
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm355_serial_device);
 
 	/* NOTE:  NAND flash timings set by the UBL are slower than
 	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -172,10 +172,6 @@ static struct platform_device *davinci_leopard_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm355_leopard_map_io(void)
 {
 	dm355_init();
@@ -251,7 +247,7 @@ static __init void dm355_leopard_init(void)
 	platform_add_devices(davinci_leopard_devices,
 			     ARRAY_SIZE(davinci_leopard_devices));
 	leopard_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm355_serial_device);
 
 	/* NOTE:  NAND flash timings set by the UBL are slower than
 	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204

arch/arm/mach-davinci/board-dm365-evm.c

@@ -718,10 +718,6 @@ static void __init evm_init_cpld(void)
 	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm365_evm_map_io(void)
 {
 	dm365_init();
@@ -748,7 +744,7 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = {
 static __init void dm365_evm_init(void)
 {
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm365_serial_device);
 
 	dm365evm_emac_configure();
 	dm365evm_mmc_configure();

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -726,10 +726,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
 	&rtc_dev,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init
 davinci_evm_map_io(void)
 {
@@ -791,7 +787,7 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	/* irlml6401 switches over 1A, in under 8 msec */

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -749,10 +749,6 @@ static void __init davinci_map_io(void)
 	cdce_clk_init();
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
  * The following EDMA channels/slots are not being used by drivers (for
@@ -792,7 +788,7 @@ static __init void evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 

arch/arm/mach-davinci/board-mityomapl138.c

@@ -434,10 +434,6 @@ static void __init mityomapl138_setup_nand(void)
 				 ARRAY_SIZE(mityomapl138_devices));
 }
 
-static struct davinci_uart_config mityomapl138_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static const short mityomap_mii_pins[] = {
 	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
 	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
@@ -517,7 +513,7 @@ static void __init mityomapl138_init(void)
 	if (ret)
 		pr_warning("watchdog registration failed: %d\n", ret);
 
-	davinci_serial_init(&mityomapl138_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
 	if (ret)

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -153,10 +153,6 @@ static struct platform_device *davinci_ntosd2_devices[] __initdata = {
 	&ntosd2_leds_dev,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init davinci_ntosd2_map_io(void)
 {
 	dm644x_init();
@@ -197,7 +193,7 @@ static __init void davinci_ntosd2_init(void)
 	platform_add_devices(davinci_ntosd2_devices,
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	dm644x_init_asp(&dm644x_ntosd2_snd_data);
 
 	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -286,15 +286,11 @@ static __init void omapl138_hawk_usb_init(void)
 	gpio_free(DA850_USB1_VBUS_PIN);
 }
 
-static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static __init void omapl138_hawk_init(void)
 {
 	int ret;
 
-	davinci_serial_init(&omapl138_hawk_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	omapl138_hawk_config_emac();
 

arch/arm/mach-davinci/board-sffsdr.c

@@ -125,10 +125,6 @@ static struct platform_device *davinci_sffsdr_devices[] __initdata = {
 	&davinci_sffsdr_nandflash_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init davinci_sffsdr_map_io(void)
 {
 	dm644x_init();
@@ -141,7 +137,7 @@ static __init void davinci_sffsdr_init(void)
 	platform_add_devices(davinci_sffsdr_devices,
 			     ARRAY_SIZE(davinci_sffsdr_devices));
 	sffsdr_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
 	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
 

arch/arm/mach-davinci/da830.c

@@ -395,9 +395,9 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"tptc0",	&tptc0_clk),
 	CLK(NULL,		"tptc1",	&tptc1_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("serial8250.0",	NULL,		&uart0_clk),
+	CLK("serial8250.1",	NULL,		&uart1_clk),
+	CLK("serial8250.2",	NULL,		&uart2_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK(NULL,		"ecap0",	&ecap0_clk),
@@ -417,6 +417,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci_mdio.0",   "fck",          &emac_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
 	CLK(NULL,		"usb11",	&usb11_clk),
@@ -1199,7 +1200,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.gpio_base		= DA8XX_GPIO_BASE,
 	.gpio_num		= 128,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 };
 

arch/arm/mach-davinci/da850.c

@@ -451,16 +451,17 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"tpcc1",	&tpcc1_clk),
 	CLK(NULL,		"tptc2",	&tptc2_clk),
 	CLK("pruss_uio",	"pruss",	&pruss_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("serial8250.0",	NULL,		&uart0_clk),
+	CLK("serial8250.1",	NULL,		&uart1_clk),
+	CLK("serial8250.2",	NULL,		&uart2_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
 	CLK(NULL,		"emif3",	&emif3_clk),
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci_mdio.0",	"fck",		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
@@ -1301,7 +1302,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.gpio_base		= DA8XX_GPIO_BASE,
 	.gpio_num		= 144,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,

arch/arm/mach-davinci/da8xx-dt.c

@@ -20,13 +20,6 @@
 
 #define DA8XX_NUM_UARTS	3
 
-static void __init da8xx_uart_clk_enable(void)
-{
-	int i;
-	for (i = 0; i < DA8XX_NUM_UARTS; i++)
-		davinci_serial_setup_clk(i, NULL);
-}
-
 static struct of_device_id da8xx_irq_match[] __initdata = {
 	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
 	{ }
@@ -47,6 +40,9 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
 	OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL),
 	{}
 };
 
@@ -57,7 +53,6 @@ static void __init da850_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     da850_auxdata_lookup, NULL);
 
-	da8xx_uart_clk_enable();
 }
 
 static const char *da850_boards_compat[] __initdata = {

arch/arm/mach-davinci/davinci.h

@@ -106,4 +106,9 @@ int dm646x_init_edma(struct edma_rsv_info *rsv);
 void dm646x_video_init(void);
 void dm646x_setup_vpif(struct vpif_display_config *,
 		       struct vpif_capture_config *);
+
+extern struct platform_device dm365_serial_device[];
+extern struct platform_device dm355_serial_device[];
+extern struct platform_device dm644x_serial_device[];
+extern struct platform_device dm646x_serial_device[];
 #endif /*__DAVINCI_H */