Merge branch 'selftests-forwarding-various-fixes'

Ido Schimmel says:

====================
selftests: forwarding: Various fixes

Fix various problems in the forwarding selftests so that they will pass
in the netdev CI instead of being ignored. See commit messages for
details.
====================

Link: https://lore.kernel.org/r/20240208155529.1199729-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools/testing/selftests/net/forwarding/bridge_locked_port.sh

@@ -327,10 +327,10 @@ locked_port_mab_redirect()
 	RET=0
 	check_port_mab_support || return 0
 
-	bridge link set dev $swp1 learning on locked on mab on
 	tc qdisc add dev $swp1 clsact
 	tc filter add dev $swp1 ingress protocol all pref 1 handle 101 flower \
 		action mirred egress redirect dev $swp2
+	bridge link set dev $swp1 learning on locked on mab on
 
 	ping_do $h1 192.0.2.2
 	check_err $? "Ping did not work with redirection"
@@ -349,8 +349,8 @@ locked_port_mab_redirect()
 	check_err $? "Locked entry not created after deleting filter"
 
 	bridge fdb del `mac_get $h1` vlan 1 dev $swp1 master
-	tc qdisc del dev $swp1 clsact
 	bridge link set dev $swp1 learning off locked off mab off
+	tc qdisc del dev $swp1 clsact
 
 	log_test "Locked port MAB redirect"
 }

tools/testing/selftests/net/forwarding/bridge_mdb.sh

@@ -329,7 +329,7 @@ __cfg_test_port_ip_star_g()
 
 	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q " 0.00"
 	check_err $? "(*, G) \"permanent\" entry has a pending group timer"
-	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "\/0.00"
+	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "/0.00"
 	check_err $? "\"permanent\" source entry has a pending source timer"
 
 	bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -346,7 +346,7 @@ __cfg_test_port_ip_star_g()
 
 	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q " 0.00"
 	check_fail $? "(*, G) EXCLUDE entry does not have a pending group timer"
-	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "\/0.00"
+	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "/0.00"
 	check_err $? "\"blocked\" source entry has a pending source timer"
 
 	bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -363,7 +363,7 @@ __cfg_test_port_ip_star_g()
 
 	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q " 0.00"
 	check_err $? "(*, G) INCLUDE entry has a pending group timer"
-	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "\/0.00"
+	bridge -d -s mdb get dev br0 grp $grp vid 10 | grep -q "/0.00"
 	check_fail $? "Source entry does not have a pending source timer"
 
 	bridge mdb del dev br0 port $swp1 grp $grp vid 10
@@ -1252,21 +1252,25 @@ fwd_test()
 	echo
 	log_info "# Forwarding tests"
 
+	# Set the Max Response Delay to 100 centiseconds (1 second) so that the
+	# bridge will start forwarding according to its MDB soon after a
+	# multicast querier is enabled.
+	ip link set dev br0 type bridge mcast_query_response_interval 100
+
 	# Forwarding according to MDB entries only takes place when the bridge
 	# detects that there is a valid querier in the network. Set the bridge
 	# as the querier and assign it a valid IPv6 link-local address to be
 	# used as the source address for MLD queries.
 	ip -6 address add fe80::1/64 nodad dev br0
 	ip link set dev br0 type bridge mcast_querier 1
-	# Wait the default Query Response Interval (10 seconds) for the bridge
-	# to determine that there are no other queriers in the network.
 	sleep 10
 
 	fwd_test_host
 	fwd_test_port
 
 	ip link set dev br0 type bridge mcast_querier 0
 	ip -6 address del fe80::1/64 dev br0
+	ip link set dev br0 type bridge mcast_query_response_interval 1000
 }
 
 ctrl_igmpv3_is_in_test()

tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh

@@ -209,21 +209,25 @@ test_l2_miss_multicast()
 	# both registered and unregistered multicast traffic.
 	bridge link set dev $swp2 mcast_router 2
 
+	# Set the Max Response Delay to 100 centiseconds (1 second) so that the
+	# bridge will start forwarding according to its MDB soon after a
+	# multicast querier is enabled.
+	ip link set dev br1 type bridge mcast_query_response_interval 100
+
 	# Forwarding according to MDB entries only takes place when the bridge
 	# detects that there is a valid querier in the network. Set the bridge
 	# as the querier and assign it a valid IPv6 link-local address to be
 	# used as the source address for MLD queries.
 	ip link set dev br1 type bridge mcast_querier 1
 	ip -6 address add fe80::1/64 nodad dev br1
-	# Wait the default Query Response Interval (10 seconds) for the bridge
-	# to determine that there are no other queriers in the network.
 	sleep 10
 
 	test_l2_miss_multicast_ipv4
 	test_l2_miss_multicast_ipv6
 
 	ip -6 address del fe80::1/64 dev br1
 	ip link set dev br1 type bridge mcast_querier 0
+	ip link set dev br1 type bridge mcast_query_response_interval 1000
 	bridge link set dev $swp2 mcast_router 1
 }