Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits)
  [ETHTOOL]: Fix UFO typo
  [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer.
  [SCTP]: Send only 1 window update SACK per message.
  [SCTP]: Don't do CRC32C checksum over loopback.
  [SCTP] Reset rtt_in_progress for the chunk when processing its sack.
  [SCTP]: Reject sctp packets with broadcast addresses.
  [SCTP]: Limit association max_retrans setting in setsockopt.
  [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate.
  [IPV6]: Sum real space for RTAs.
  [IRDA]: Use put_unaligned() in irlmp_do_discovery().
  [BRIDGE]: Add support for NETIF_F_HW_CSUM devices
  [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM
  [TG3]: Convert to non-LLTX
  [TG3]: Remove unnecessary tx_lock
  [TCP]: Add tcp_slow_start_after_idle sysctl.
  [BNX2]: Update version and reldate
  [BNX2]: Use CPU native page size
  [BNX2]: Use compressed firmware
  [BNX2]: Add firmware decompression
  [BNX2]: Allow WoL settings on new 5708 chips
  ...

Manual fixup for conflict in drivers/net/tulip/winbond-840.c

Documentation/kernel-parameters.txt

@@ -1402,6 +1402,15 @@ running once the system is up.
 			If enabled at boot time, /selinux/disable can be used
 			later to disable prior to initial policy load.
 
+	selinux_compat_net =
+			[SELINUX] Set initial selinux_compat_net flag value.
+                        Format: { "0" | "1" }
+                        0 -- use new secmark-based packet controls
+                        1 -- use legacy packet controls
+                        Default value is 0 (preferred).
+                        Value can be changed at runtime via
+                        /selinux/compat_net.
+
 	serialnumber	[BUGS=IA-32]
 
 	sg_def_reserved_size=	[SCSI]

Documentation/networking/ip-sysctl.txt

@@ -362,6 +362,13 @@ tcp_workaround_signed_windows - BOOLEAN
 	not receive a window scaling option from them.
 	Default: 0
 
+tcp_slow_start_after_idle - BOOLEAN
+	If set, provide RFC2861 behavior and time out the congestion
+	window after an idle period.  An idle period is defined at
+	the current RTO.  If unset, the congestion window will not
+	be timed out after an idle period.
+	Default: 1
+
 IP Variables:
 
 ip_local_port_range - 2 INTEGERS

Documentation/networking/netdevices.txt

@@ -42,9 +42,9 @@ dev->get_stats:
 	Context: nominally process, but don't sleep inside an rwlock
 
 dev->hard_start_xmit:
-	Synchronization: dev->xmit_lock spinlock.
+	Synchronization: netif_tx_lock spinlock.
 	When the driver sets NETIF_F_LLTX in dev->features this will be
-	called without holding xmit_lock. In this case the driver 
+	called without holding netif_tx_lock. In this case the driver
 	has to lock by itself when needed. It is recommended to use a try lock
 	for this and return -1 when the spin lock fails. 
 	The locking there should also properly protect against 
@@ -62,12 +62,12 @@ dev->hard_start_xmit:
 	  Only valid when NETIF_F_LLTX is set.
 
 dev->tx_timeout:
-	Synchronization: dev->xmit_lock spinlock.
+	Synchronization: netif_tx_lock spinlock.
 	Context: BHs disabled
 	Notes: netif_queue_stopped() is guaranteed true
 
 dev->set_multicast_list:
-	Synchronization: dev->xmit_lock spinlock.
+	Synchronization: netif_tx_lock spinlock.
 	Context: BHs disabled
 
 dev->poll:

drivers/Kconfig

@@ -72,4 +72,6 @@ source "drivers/edac/Kconfig"
 
 source "drivers/rtc/Kconfig"
 
+source "drivers/dma/Kconfig"
+
 endmenu

drivers/Makefile

@@ -74,3 +74,4 @@ obj-$(CONFIG_SGI_SN)		+= sn/
 obj-y				+= firmware/
 obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
+obj-$(CONFIG_DMA_ENGINE)	+= dma/

drivers/block/aoe/aoenet.c

@@ -116,8 +116,7 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt,
 	skb = skb_share_check(skb, GFP_ATOMIC);
 	if (skb == NULL)
 		return 0;
-	if (skb_is_nonlinear(skb))
-	if (skb_linearize(skb, GFP_ATOMIC) < 0)
+	if (skb_linearize(skb))
 		goto exit;
 	if (!is_aoe_netif(ifp))
 		goto exit;

drivers/connector/cn_queue.c

@@ -127,7 +127,7 @@ void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id)
 
 	if (found) {
 		cn_queue_free_callback(cbq);
-		atomic_dec_and_test(&dev->refcnt);
+		atomic_dec(&dev->refcnt);
 	}
 }
 

drivers/dma/Kconfig

@@ -0,0 +1,34 @@
+#
+# DMA engine configuration
+#
+
+menu "DMA Engine support"
+
+config DMA_ENGINE
+	bool "Support for DMA engines"
+	---help---
+	  DMA engines offload copy operations from the CPU to dedicated
+	  hardware, allowing the copies to happen asynchronously.
+
+comment "DMA Clients"
+
+config NET_DMA
+	bool "Network: TCP receive copy offload"
+	depends on DMA_ENGINE && NET
+	default y
+	---help---
+	  This enables the use of DMA engines in the network stack to
+	  offload receive copy-to-user operations, freeing CPU cycles.
+	  Since this is the main user of the DMA engine, it should be enabled;
+	  say Y here.
+
+comment "DMA Devices"
+
+config INTEL_IOATDMA
+	tristate "Intel I/OAT DMA support"
+	depends on DMA_ENGINE && PCI
+	default m
+	---help---
+	  Enable support for the Intel(R) I/OAT DMA engine.
+
+endmenu

drivers/dma/Makefile

@@ -0,0 +1,3 @@
+obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
+obj-$(CONFIG_NET_DMA) += iovlock.o
+obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o