ath11k: Add HW params for WCN6750

WCN6750 is a PCIe based solution that is attached to and enumerated
by the WPSS (Wireless Processor SubSystem) Q6 processor.

Though it is a PCIe device, since it is not attached to APSS processor
(Application Processor SubSystem), APSS will be unaware of such a decice
and hence it is registered to the APSS processor as a platform device(AHB).
Because of this hybrid nature, it is called as a hybrid bus device.

A new variable hybrid_bus_type is defined in hw_params to indicate the
hybrid nature of the device.

Add HW params for WCN6750.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220429170502.20080-4-quic_mpubbise@quicinc.com

drivers/net/wireless/ath/ath11k/core.c

@@ -106,6 +106,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.fixed_bdf_addr = true,
 		.fixed_mem_region = true,
 		.static_window_map = false,
+		.hybrid_bus_type = false,
 	},
 	{
 		.hw_rev = ATH11K_HW_IPQ6018_HW10,
@@ -177,6 +178,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.fixed_bdf_addr = true,
 		.fixed_mem_region = true,
 		.static_window_map = false,
+		.hybrid_bus_type = false,
 	},
 	{
 		.name = "qca6390 hw2.0",
@@ -247,6 +249,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.fixed_bdf_addr = false,
 		.fixed_mem_region = false,
 		.static_window_map = false,
+		.hybrid_bus_type = false,
 	},
 	{
 		.name = "qcn9074 hw1.0",
@@ -317,6 +320,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.fixed_bdf_addr = false,
 		.fixed_mem_region = false,
 		.static_window_map = true,
+		.hybrid_bus_type = false,
 	},
 	{
 		.name = "wcn6855 hw2.0",
@@ -387,6 +391,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.fixed_bdf_addr = false,
 		.fixed_mem_region = false,
 		.static_window_map = false,
+		.hybrid_bus_type = false,
 	},
 	{
 		.name = "wcn6855 hw2.1",
@@ -456,6 +461,74 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.fixed_bdf_addr = false,
 		.fixed_mem_region = false,
 		.static_window_map = false,
+		.hybrid_bus_type = false,
+	},
+	{
+		.name = "wcn6750 hw1.0",
+		.hw_rev = ATH11K_HW_WCN6750_HW10,
+		.fw = {
+			.dir = "WCN6750/hw1.0",
+			.board_size = 256 * 1024,
+			.cal_offset = 128 * 1024,
+		},
+		.max_radios = 1,
+		.bdf_addr = 0x4B0C0000,
+		.ring_mask = &ath11k_hw_ring_mask_qca6390,
+		.internal_sleep_clock = false,
+		.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_WCN6750,
+		.host_ce_config = ath11k_host_ce_config_qca6390,
+		.ce_count = 9,
+		.target_ce_config = ath11k_target_ce_config_wlan_qca6390,
+		.target_ce_count = 9,
+		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
+		.svc_to_ce_map_len = 14,
+		.rfkill_pin = 0,
+		.rfkill_cfg = 0,
+		.rfkill_on_level = 0,
+		.single_pdev_only = true,
+		.rxdma1_enable = false,
+		.num_rxmda_per_pdev = 1,
+		.rx_mac_buf_ring = true,
+		.vdev_start_delay = true,
+		.htt_peer_map_v2 = false,
+
+		.spectral = {
+			.fft_sz = 0,
+			.fft_pad_sz = 0,
+			.summary_pad_sz = 0,
+			.fft_hdr_len = 0,
+			.max_fft_bins = 0,
+		},
+
+		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
+					BIT(NL80211_IFTYPE_AP),
+		.supports_monitor = false,
+		.supports_shadow_regs = true,
+		.idle_ps = true,
+		.supports_sta_ps = true,
+		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
+		.supports_suspend = false,
+		.supports_regdb = true,
+		.fix_l1ss = false,
+		.credit_flow = true,
+		.max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390,
+		.hal_params = &ath11k_hw_hal_params_qca6390,
+		.supports_dynamic_smps_6ghz = false,
+		.alloc_cacheable_memory = false,
+		.supports_rssi_stats = true,
+		.fw_wmi_diag_event = false,
+		.current_cc_support = true,
+		.dbr_debug_support = false,
+		.global_reset = false,
+		.bios_sar_capa = NULL,
+		.m3_fw_support = false,
+		.fixed_bdf_addr = false,
+		.fixed_mem_region = false,
+		.static_window_map = true,
+		.hybrid_bus_type = true,
 	},
 };
 

drivers/net/wireless/ath/ath11k/core.h

@@ -140,6 +140,7 @@ enum ath11k_hw_rev {
 	ATH11K_HW_QCN9074_HW10,
 	ATH11K_HW_WCN6855_HW20,
 	ATH11K_HW_WCN6855_HW21,
+	ATH11K_HW_WCN6750_HW10,
 };
 
 enum ath11k_firmware_mode {

drivers/net/wireless/ath/ath11k/hw.h

@@ -200,6 +200,7 @@ struct ath11k_hw_params {
 	bool fixed_bdf_addr;
 	bool fixed_mem_region;
 	bool static_window_map;
+	bool hybrid_bus_type;
 };
 
 struct ath11k_hw_ops {

drivers/net/wireless/ath/ath11k/qmi.h

@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH11K_QMI_H
@@ -20,6 +21,7 @@
 #define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCA6390	0x01
 #define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074	0x02
 #define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCN9074	0x07
+#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_WCN6750	0x03
 #define ATH11K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01	32
 #define ATH11K_QMI_RESP_LEN_MAX			8192
 #define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	52