mlxsw: spectrum: Use separate trap group for FID miss

When a packet enters the device it is classified to a filtering
identifier (FID) based on the ingress port and VLAN. The FID miss trap
is used to trap packets for which a FID could not be found.

In mlxsw this trap should only be triggered when a port is enslaved to
an OVS bridge and a matching ACL rule could not be found, so as to
trigger learning.

These packets are therefore completely unrelated to packets hitting
local routes and should be in a different group. Move them.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -5549,6 +5549,7 @@ enum mlxsw_reg_htgt_trap_group {
 	MLXSW_REG_HTGT_TRAP_GROUP_SP_VRRP,
 	MLXSW_REG_HTGT_TRAP_GROUP_SP_PKT_SAMPLE,
 	MLXSW_REG_HTGT_TRAP_GROUP_SP_FLOW_LOGGING,
+	MLXSW_REG_HTGT_TRAP_GROUP_SP_FID_MISS,
 
 	__MLXSW_REG_HTGT_TRAP_GROUP_MAX,
 	MLXSW_REG_HTGT_TRAP_GROUP_MAX = __MLXSW_REG_HTGT_TRAP_GROUP_MAX - 1

drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -4052,7 +4052,7 @@ static const struct mlxsw_listener mlxsw_sp_listener[] = {
 	MLXSW_SP_RXL_NO_MARK(IGMP_V3_REPORT, TRAP_TO_CPU, MC_SNOOPING, false),
 	MLXSW_SP_RXL_MARK(ARPBC, MIRROR_TO_CPU, NEIGH_DISCOVERY, false),
 	MLXSW_SP_RXL_MARK(ARPUC, MIRROR_TO_CPU, NEIGH_DISCOVERY, false),
-	MLXSW_SP_RXL_NO_MARK(FID_MISS, TRAP_TO_CPU, IP2ME, false),
+	MLXSW_SP_RXL_NO_MARK(FID_MISS, TRAP_TO_CPU, FID_MISS, false),
 	MLXSW_SP_RXL_MARK(IPV6_MLDV12_LISTENER_QUERY, MIRROR_TO_CPU,
 			  MC_SNOOPING, false),
 	MLXSW_SP_RXL_NO_MARK(IPV6_MLDV1_LISTENER_REPORT, TRAP_TO_CPU,
@@ -4169,6 +4169,7 @@ static int mlxsw_sp_cpu_policers_set(struct mlxsw_core *mlxsw_core)
 		case MLXSW_REG_HTGT_TRAP_GROUP_SP_MULTICAST:
 		case MLXSW_REG_HTGT_TRAP_GROUP_SP_FLOW_LOGGING:
 		case MLXSW_REG_HTGT_TRAP_GROUP_SP_IP2ME:
+		case MLXSW_REG_HTGT_TRAP_GROUP_SP_FID_MISS:
 			rate = 1024;
 			burst_size = 7;
 			break;
@@ -4248,6 +4249,7 @@ static int mlxsw_sp_trap_groups_set(struct mlxsw_core *mlxsw_core)
 		case MLXSW_REG_HTGT_TRAP_GROUP_SP_ROUTER_EXP:
 		case MLXSW_REG_HTGT_TRAP_GROUP_SP_REMOTE_ROUTE:
 		case MLXSW_REG_HTGT_TRAP_GROUP_SP_MULTICAST:
+		case MLXSW_REG_HTGT_TRAP_GROUP_SP_FID_MISS:
 			priority = 1;
 			tc = 1;
 			break;