ALSA: emu10k1: documentation updates

- Less misinformation
- Language and whitespace fixups

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230405201220.2197893-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation/sound/alsa-configuration.rst

@@ -723,9 +723,10 @@ Module for EMU10K1/EMU10k2 based PCI sound cards.
 
 * Sound Blaster Live!
 * Sound Blaster PCI 512
-* Emu APS (partially supported)
 * Sound Blaster Audigy
-
+* E-MU APS (partially supported)
+* E-MU DAS
+
 extin
     bitmap of available external inputs for FX8010 (see below)
 extout

Documentation/sound/cards/audigy-mixer.rst

@@ -19,9 +19,9 @@ Digital mixer controls
 These controls are built using the DSP instructions. They offer extended
 functionality. Only the default built-in code in the ALSA driver is described
 here. Note that the controls work as attenuators: the maximum value is the 
-neutral position leaving the signal unchanged. Note that if the  same destination 
-is mentioned in multiple controls, the signal is accumulated and can be wrapped 
-(set to maximal or minimal value without checking of overflow).
+neutral position leaving the signal unchanged. Note that if the same destination
+is mentioned in multiple controls, the signal is accumulated and can be clipped
+(set to maximal or minimal value without checking for overflow).
 
 
 Explanation of used abbreviations:
@@ -32,17 +32,17 @@ ADC
 	analog to digital converter
 I2S
 	one-way three wire serial bus for digital sound by Philips Semiconductors
-        (this standard is used for connecting standalone DAC and ADC converters)
+	(this standard is used for connecting standalone D/A and A/D converters)
 LFE
-	low frequency effects (subwoofer signal)
+	low frequency effects (used as subwoofer signal)
 AC97
-	a chip containing an analog mixer, DAC and ADC converters
+	a chip containing an analog mixer, D/A and A/D converters
 IEC958
 	S/PDIF
 FX-bus
 	the EMU10K2 chip has an effect bus containing 64 accumulators.
-        Each of the synthesizer voices can feed its output to these accumulators
-        and the DSP microcontroller can operate with the resulting sum.
+	Each of the synthesizer voices can feed its output to these accumulators
+	and the DSP microcontroller can operate with the resulting sum.
 
 name='PCM Front Playback Volume',index=0
 ----------------------------------------
@@ -218,8 +218,8 @@ LFE outputs.
 name='IEC958 Optical Raw Playback Switch',index=0
 -------------------------------------------------
 If this switch is on, then the samples for the IEC958 (S/PDIF) digital
-output are taken only from the raw FX8010 PCM, otherwise standard front
-PCM samples are taken.
+output are taken only from the raw iec958 ALSA PCM device (which uses
+accumulators 20 and 21 for left and right PCM by default).
 
 
 PCM stream related controls
@@ -237,8 +237,8 @@ as follows:
 
 name='EMU10K1 PCM Send Routing',index 0-31
 ------------------------------------------
-This control specifies the destination - FX-bus accumulators. There 24
-values with this mapping:
+This control specifies the destination - FX-bus accumulators. There are 24
+values in this mapping:
 
 * 0 -  mono, A destination (FX-bus 0-63), default 0
 * 1 -  mono, B destination (FX-bus 0-63), default 1
@@ -306,6 +306,9 @@ MANUALS/PATENTS
 ftp://opensource.creative.com/pub/doc
 -------------------------------------
 
+Note that the site is defunct, but the documents are available
+from various other locations.
+
 LM4545.pdf
 	AC97 Codec
 

Documentation/sound/cards/sb-live-mixer.rst

@@ -15,7 +15,7 @@ The ALSA driver programs this portion of chip by default code
 IEC958 (S/PDIF) raw PCM
 =======================
 
-This PCM device (it's the 4th PCM device (index 3!) and first subdevice
+This PCM device (it's the 3rd PCM device (index 2!) and first subdevice
 (index 0) for a given card) allows to forward 48kHz, stereo, 16-bit
 little endian streams without any modifications to the digital output
 (coaxial or optical). The universal interface allows the creation of up
@@ -33,9 +33,9 @@ Digital mixer controls
 These controls are built using the DSP instructions. They offer extended
 functionality. Only the default built-in code in the ALSA driver is described
 here. Note that the controls work as attenuators: the maximum value is the 
-neutral position leaving the signal unchanged. Note that if the  same destination 
-is mentioned in multiple controls, the signal is accumulated and can be wrapped 
-(set to maximal or minimal value without checking of overflow).
+neutral position leaving the signal unchanged. Note that if the same destination
+is mentioned in multiple controls, the signal is accumulated and can be clipped
+(set to maximal or minimal value without checking for overflow).
 
 
 Explanation of used abbreviations:
@@ -46,11 +46,11 @@ ADC
 	analog to digital converter
 I2S
 	one-way three wire serial bus for digital sound by Philips Semiconductors
-        (this standard is used for connecting standalone DAC and ADC converters)
+	(this standard is used for connecting standalone D/A and A/D converters)
 LFE
-	low frequency effects (subwoofer signal)
+	low frequency effects (used as subwoofer signal)
 AC97
-	a chip containing an analog mixer, DAC and ADC converters
+	a chip containing an analog mixer, D/A and A/D converters
 IEC958
 	S/PDIF
 FX-bus
@@ -313,6 +313,9 @@ MANUALS/PATENTS
 ftp://opensource.creative.com/pub/doc
 -------------------------------------
 
+Note that the site is defunct, but the documents are available
+from various other locations.
+
 LM4545.pdf
 	AC97 Codec
 m2049.pdf