rtlwifi: Update power-save routines for 062814 driver

Realtek released a new version of the drivers on 06/28/2014. This patch implements the new power-save code. These changes also force corresponding changes in the drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
mariux64 · Sep 26, 2014 · d3feae4 · d3feae4
1 parent 3c67b8f
commit d3feae4
Show file tree

Hide file tree

Showing 13 changed files with 162 additions and 253 deletions.
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h
@@ -11,10 +11,6 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
  * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
@@ -32,68 +28,9 @@
 
 #define MAX_SW_LPS_SLEEP_INTV	5
 
-/*---------------------------------------------
- * 3 The value of cmd: 4 bits
- *---------------------------------------------
- */
-#define    PWR_CMD_READ		0x00
-#define    PWR_CMD_WRITE	0x01
-#define    PWR_CMD_POLLING	0x02
-#define    PWR_CMD_DELAY	0x03
-#define    PWR_CMD_END		0x04
-
-/* define the base address of each block */
-#define	PWR_BASEADDR_MAC	0x00
-#define	PWR_BASEADDR_USB	0x01
-#define	PWR_BASEADDR_PCIE	0x02
-#define	PWR_BASEADDR_SDIO	0x03
-
-#define	PWR_FAB_ALL_MSK		(BIT(0)|BIT(1)|BIT(2)|BIT(3))
-#define	PWR_CUT_TESTCHIP_MSK	BIT(0)
-#define	PWR_CUT_A_MSK		BIT(1)
-#define	PWR_CUT_B_MSK		BIT(2)
-#define	PWR_CUT_C_MSK		BIT(3)
-#define	PWR_CUT_D_MSK		BIT(4)
-#define	PWR_CUT_E_MSK		BIT(5)
-#define	PWR_CUT_F_MSK		BIT(6)
-#define	PWR_CUT_G_MSK		BIT(7)
-#define	PWR_CUT_ALL_MSK		0xFF
-#define PWR_INTF_SDIO_MSK	BIT(0)
-#define PWR_INTF_USB_MSK	BIT(1)
-#define PWR_INTF_PCI_MSK	BIT(2)
-#define PWR_INTF_ALL_MSK	(BIT(0)|BIT(1)|BIT(2)|BIT(3))
-
-enum pwrseq_delay_unit {
-	PWRSEQ_DELAY_US,
-	PWRSEQ_DELAY_MS,
-};
-
-struct wlan_pwr_cfg {
-	u16 offset;
-	u8 cut_msk;
-	u8 fab_msk:4;
-	u8 interface_msk:4;
-	u8 base:4;
-	u8 cmd:4;
-	u8 msk;
-	u8 value;
-};
-
-#define	GET_PWR_CFG_OFFSET(__PWR_CMD)	(__PWR_CMD.offset)
-#define	GET_PWR_CFG_CUT_MASK(__PWR_CMD)	(__PWR_CMD.cut_msk)
-#define	GET_PWR_CFG_FAB_MASK(__PWR_CMD)	(__PWR_CMD.fab_msk)
-#define	GET_PWR_CFG_INTF_MASK(__PWR_CMD)	(__PWR_CMD.interface_msk)
-#define	GET_PWR_CFG_BASE(__PWR_CMD)	(__PWR_CMD.base)
-#define	GET_PWR_CFG_CMD(__PWR_CMD)	(__PWR_CMD.cmd)
-#define	GET_PWR_CFG_MASK(__PWR_CMD)	(__PWR_CMD.msk)
-#define	GET_PWR_CFG_VALUE(__PWR_CMD)	(__PWR_CMD.value)
-
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
-			      u8 fab_version, u8 interface_type,
-			      struct wlan_pwr_cfg pwrcfgcmd[]);
-
 bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
-			 enum rf_pwrstate state_toset, u32 changesource);
+			 enum rf_pwrstate state_toset, u32 changesource,
+			 bool protect_or_not);
 bool rtl_ps_enable_nic(struct ieee80211_hw *hw);
 bool rtl_ps_disable_nic(struct ieee80211_hw *hw);
 void rtl_ips_nic_off(struct ieee80211_hw *hw);
@@ -102,12 +39,14 @@ void rtl_ips_nic_off_wq_callback(void *data);
 void rtl_lps_enter(struct ieee80211_hw *hw);
 void rtl_lps_leave(struct ieee80211_hw *hw);
 
+void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode);
+
 void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len);
 void rtl_swlps_wq_callback(void *data);
 void rtl_swlps_rfon_wq_callback(void *data);
 void rtl_swlps_rf_awake(struct ieee80211_hw *hw);
 void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
-void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
+void rtl_p2p_ps_cmd(struct ieee80211_hw *hw , u8 p2p_ps_state);
 void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len);
 void rtl_lps_change_work_callback(struct work_struct *work);
 

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile b/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
@@ -5,6 +5,7 @@ rtl8188ee-objs :=		\
 		led.o		\
 		phy.o		\
 		pwrseq.o	\
+		pwrseqcmd.o	\
 		rf.o		\
 		sw.o		\
 		table.o		\

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -41,6 +41,7 @@
 #include "fw.h"
 #include "led.h"
 #include "hw.h"
+#include "pwrseqcmd.h"
 #include "pwrseq.h"
 
 #define LLT_CONFIG		5
@@ -809,9 +810,9 @@ static bool _rtl88ee_init_mac(struct ieee80211_hw *hw)
 
 	rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
 	/* HW Power on sequence */
-	if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
-				      PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
-				      Rtl8188E_NIC_ENABLE_FLOW)) {
+	if (!rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+					PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+					RTL8188E_NIC_ENABLE_FLOW)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 			 "init MAC Fail as rtl_hal_pwrseqcmdparsing\n");
 		return false;
@@ -1352,9 +1353,9 @@ static void _rtl88ee_poweroff_adapter(struct ieee80211_hw *hw)
 	}
 	rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG+1, 0xFF);
 
-	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				 PWR_INTF_PCI_MSK,
-				 Rtl8188E_NIC_LPS_ENTER_FLOW);
+	rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				   PWR_INTF_PCI_MSK,
+				   RTL8188E_NIC_LPS_ENTER_FLOW);
 
 	rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
 
@@ -1368,8 +1369,8 @@ static void _rtl88ee_poweroff_adapter(struct ieee80211_hw *hw)
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_32K_CTRL);
 	rtl_write_byte(rtlpriv, REG_32K_CTRL, (u1b_tmp & (~BIT(0))));
 
-	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				 PWR_INTF_PCI_MSK, Rtl8188E_NIC_DISABLE_FLOW);
+	rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				   PWR_INTF_PCI_MSK, RTL8188E_NIC_DISABLE_FLOW);
 
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL+1);
 	rtl_write_byte(rtlpriv, REG_RSV_CTRL+1, (u1b_tmp & (~BIT(3))));

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
@@ -313,14 +313,14 @@ extern struct wlan_pwr_cfg rtl8188e_leave_lps_flow
 		RTL8188E_TRANS_END_STEPS];
 
 /* RTL8723 Power Configuration CMDs for PCIe interface */
-#define Rtl8188E_NIC_PWR_ON_FLOW	rtl8188e_power_on_flow
-#define Rtl8188E_NIC_RF_OFF_FLOW	rtl8188e_radio_off_flow
-#define Rtl8188E_NIC_DISABLE_FLOW	rtl8188e_card_disable_flow
-#define Rtl8188E_NIC_ENABLE_FLOW	rtl8188e_card_enable_flow
-#define Rtl8188E_NIC_SUSPEND_FLOW	rtl8188e_suspend_flow
-#define Rtl8188E_NIC_RESUME_FLOW	rtl8188e_resume_flow
-#define Rtl8188E_NIC_PDN_FLOW		rtl8188e_hwpdn_flow
-#define Rtl8188E_NIC_LPS_ENTER_FLOW	rtl8188e_enter_lps_flow
-#define Rtl8188E_NIC_LPS_LEAVE_FLOW	rtl8188e_leave_lps_flow
+#define RTL8188E_NIC_PWR_ON_FLOW	rtl8188e_power_on_flow
+#define RTL8188E_NIC_RF_OFF_FLOW	rtl8188e_radio_off_flow
+#define RTL8188E_NIC_DISABLE_FLOW	rtl8188e_card_disable_flow
+#define RTL8188E_NIC_ENABLE_FLOW	rtl8188e_card_enable_flow
+#define RTL8188E_NIC_SUSPEND_FLOW	rtl8188e_suspend_flow
+#define RTL8188E_NIC_RESUME_FLOW	rtl8188e_resume_flow
+#define RTL8188E_NIC_PDN_FLOW		rtl8188e_hwpdn_flow
+#define RTL8188E_NIC_LPS_ENTER_FLOW	rtl8188e_enter_lps_flow
+#define RTL8188E_NIC_LPS_LEAVE_FLOW	rtl8188e_leave_lps_flow
 
 #endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include "pwrseqcmd.h"
 #include "pwrseq.h"
 
 

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
@@ -11,10 +11,6 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
  * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *

diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile b/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile
@@ -10,6 +10,7 @@ rtl8723ae-objs :=		\
 		led.o		\
 		phy.o		\
 		pwrseq.o	\
+		pwrseqcmd.o	\
 		rf.o		\
 		sw.o		\
 		table.o		\

diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -43,6 +43,7 @@
 #include "../rtl8723com/fw_common.h"
 #include "led.h"
 #include "hw.h"
+#include "pwrseqcmd.h"
 #include "pwrseq.h"
 #include "btc.h"
 

diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include "pwrseqcmd.h"
 #include "pwrseq.h"
 
 /*	Description:

diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/Makefile b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
@@ -8,6 +8,7 @@ rtl8723be-objs :=		\
 		led.o		\
 		phy.o		\
 		pwrseq.o	\
+		pwrseqcmd.o	\
 		rf.o		\
 		sw.o		\
 		table.o		\

diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -39,6 +39,7 @@
 #include "../rtl8723com/fw_common.h"
 #include "led.h"
 #include "hw.h"
+#include "pwrseqcmd.h"
 #include "pwrseq.h"
 #include "../btcoexist/rtl_btc.h"
 
@@ -814,9 +815,9 @@ static bool _rtl8723be_init_mac(struct ieee80211_hw *hw)
 		mac_func_enable = false;
 
 	/* HW Power on sequence */
-	if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
-				      PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
-				      RTL8723_NIC_ENABLE_FLOW)) {
+	if (!rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+					PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+					RTL8723_NIC_ENABLE_FLOW)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 			 "init MAC Fail as power on failure\n");
 		return false;
@@ -1305,8 +1306,8 @@ static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
 
 	/* Combo (PCIe + USB) Card and PCIe-MF Card */
 	/* 1. Run LPS WL RFOFF flow */
-	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				 PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
+	rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				   PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
 
 	/* 2. 0x1F[7:0] = 0 */
 	/* turn off RF */
@@ -1324,8 +1325,8 @@ static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
 	rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
 
 	/* HW card disable configuration. */
-	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				 PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
+	rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				   PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
 
 	/* Reset MCU IO Wrapper */
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);

diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
@@ -23,6 +23,7 @@
  *
  *****************************************************************************/
 
+#include "pwrseqcmd.h"
 #include "pwrseq.h"
 
 /*	Description: