Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…tnguy/next-queue

Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-03-19

This series contains updates to igc and e1000e drivers.

Sasha removes unused defines in igc driver.

Jiapeng Zhong changes bool assignments from 0/1 to false/true for igc.

Wei Yongjun marks e1000e_pm_prepare() as __maybe_unused to resolve a
defined but not used warning under certain configurations.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -6919,7 +6919,7 @@ static int __e1000_resume(struct pci_dev *pdev)
 	return 0;
 }
 
-static int e1000e_pm_prepare(struct device *dev)
+static __maybe_unused int e1000e_pm_prepare(struct device *dev)
 {
 	return pm_runtime_suspended(dev) &&
 		pm_suspend_via_firmware();

drivers/net/ethernet/intel/igc/igc_defines.h

@@ -441,11 +441,6 @@
 #define MII_CR_RESTART_AUTO_NEG	0x0200  /* Restart auto negotiation */
 #define MII_CR_POWER_DOWN	0x0800  /* Power down */
 #define MII_CR_AUTO_NEG_EN	0x1000  /* Auto Neg Enable */
-#define MII_CR_LOOPBACK		0x4000  /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET		0x8000  /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_1000	0x0040
-#define MII_CR_SPEED_100	0x2000
-#define MII_CR_SPEED_10		0x0000
 
 /* PHY Status Register */
 #define MII_SR_LINK_STATUS	0x0004 /* Link Status 1 = link */

drivers/net/ethernet/intel/igc/igc_main.c

@@ -3580,7 +3580,7 @@ void igc_up(struct igc_adapter *adapter)
 	netif_tx_start_all_queues(adapter->netdev);
 
 	/* start the watchdog. */
-	hw->mac.get_link_status = 1;
+	hw->mac.get_link_status = true;
 	schedule_work(&adapter->watchdog_task);
 }
 
@@ -4000,7 +4000,7 @@ static irqreturn_t igc_msix_other(int irq, void *data)
 	}
 
 	if (icr & IGC_ICR_LSC) {
-		hw->mac.get_link_status = 1;
+		hw->mac.get_link_status = true;
 		/* guard against interrupt when we're going down */
 		if (!test_bit(__IGC_DOWN, &adapter->state))
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
@@ -4378,7 +4378,7 @@ static irqreturn_t igc_intr_msi(int irq, void *data)
 	}
 
 	if (icr & (IGC_ICR_RXSEQ | IGC_ICR_LSC)) {
-		hw->mac.get_link_status = 1;
+		hw->mac.get_link_status = true;
 		if (!test_bit(__IGC_DOWN, &adapter->state))
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
@@ -4420,7 +4420,7 @@ static irqreturn_t igc_intr(int irq, void *data)
 	}
 
 	if (icr & (IGC_ICR_RXSEQ | IGC_ICR_LSC)) {
-		hw->mac.get_link_status = 1;
+		hw->mac.get_link_status = true;
 		/* guard against interrupt when we're going down */
 		if (!test_bit(__IGC_DOWN, &adapter->state))
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
@@ -4574,7 +4574,7 @@ static int __igc_open(struct net_device *netdev, bool resuming)
 	netif_tx_start_all_queues(netdev);
 
 	/* start the watchdog. */
-	hw->mac.get_link_status = 1;
+	hw->mac.get_link_status = true;
 	schedule_work(&adapter->watchdog_task);
 
 	return IGC_SUCCESS;
@@ -4915,7 +4915,7 @@ int igc_set_spd_dplx(struct igc_adapter *adapter, u32 spd, u8 dplx)
 {
 	struct igc_mac_info *mac = &adapter->hw.mac;
 
-	mac->autoneg = 0;
+	mac->autoneg = false;
 
 	/* Make sure dplx is at most 1 bit and lsb of speed is not set
 	 * for the switch() below to work
@@ -4937,13 +4937,13 @@ int igc_set_spd_dplx(struct igc_adapter *adapter, u32 spd, u8 dplx)
 		mac->forced_speed_duplex = ADVERTISE_100_FULL;
 		break;
 	case SPEED_1000 + DUPLEX_FULL:
-		mac->autoneg = 1;
+		mac->autoneg = true;
 		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 		goto err_inval;
 	case SPEED_2500 + DUPLEX_FULL:
-		mac->autoneg = 1;
+		mac->autoneg = true;
 		adapter->hw.phy.autoneg_advertised = ADVERTISE_2500_FULL;
 		break;
 	case SPEED_2500 + DUPLEX_HALF: /* not supported */