Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann.

 2) Fix ATM VCC memory accounting, from David Woodhouse.

 3) fib6_info objects need RCU freeing, from Eric Dumazet.

 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern.

 5) Fix clobbered error code in enic_open() failure path, from
    Govindarajulu Varadarajan.

 6) Propagate dev_get_valid_name() error returns properly, from Li
    RongQing.

 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski.

 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from
    Davide Caratti.

 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
  ip: limit use of gso_size to udp
  stmmac: fix DMA channel hang in half-duplex mode
  net: stmmac: socfpga: add additional ocp reset line for Stratix10
  net: sungem: fix rx checksum support
  bpfilter: ignore binary files
  bpfilter: fix build error
  net/usb/drivers: Remove useless hrtimer_active check
  net/sched: act_ife: preserve the action control in case of error
  net/sched: act_ife: fix recursive lock and idr leak
  net: ethernet: fix suspend/resume in davinci_emac
  net: propagate dev_get_valid_name return code
  enic: do not overwrite error code
  net/tcp: Fix socket lookups with SO_BINDTODEVICE
  ptp: replace getnstimeofday64() with ktime_get_real_ts64()
  net/ipv6: respect rcu grace period before freeing fib6_info
  net: net_failover: fix typo in net_failover_slave_register()
  ipvlan: use ETH_MAX_MTU as max mtu
  net: hamradio: use eth_broadcast_addr
  enic: initialize enic->rfs_h.lock in enic_probe
  MAINTAINERS: Add Sam as the maintainer for NCSI
  ...

MAINTAINERS

@@ -9751,6 +9751,11 @@ L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/NCR_D700.*
 
+NCSI LIBRARY:
+M:	Samuel Mendoza-Jonas <sam@mendozajonas.com>
+S:	Maintained
+F:	net/ncsi/
+
 NCT6775 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org

drivers/bluetooth/hci_nokia.c

@@ -29,7 +29,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <linux/unaligned/le_struct.h>
+#include <asm/unaligned.h>
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 

drivers/net/ethernet/cisco/enic/enic_clsf.c

@@ -79,7 +79,6 @@ void enic_rfs_flw_tbl_init(struct enic *enic)
 	enic->rfs_h.max = enic->config.num_arfs;
 	enic->rfs_h.free = enic->rfs_h.max;
 	enic->rfs_h.toclean = 0;
-	enic_rfs_timer_start(enic);
 }
 
 void enic_rfs_flw_tbl_free(struct enic *enic)
@@ -88,7 +87,6 @@ void enic_rfs_flw_tbl_free(struct enic *enic)
 
 	enic_rfs_timer_stop(enic);
 	spin_lock_bh(&enic->rfs_h.lock);
-	enic->rfs_h.free = 0;
 	for (i = 0; i < (1 << ENIC_RFS_FLW_BITSHIFT); i++) {
 		struct hlist_head *hhead;
 		struct hlist_node *tmp;
@@ -99,6 +97,7 @@ void enic_rfs_flw_tbl_free(struct enic *enic)
 			enic_delfltr(enic, n->fltr_id);
 			hlist_del(&n->node);
 			kfree(n);
+			enic->rfs_h.free++;
 		}
 	}
 	spin_unlock_bh(&enic->rfs_h.lock);

drivers/net/ethernet/cisco/enic/enic_main.c

@@ -1920,7 +1920,7 @@ static int enic_open(struct net_device *netdev)
 {
 	struct enic *enic = netdev_priv(netdev);
 	unsigned int i;
-	int err;
+	int err, ret;
 
 	err = enic_request_intr(enic);
 	if (err) {
@@ -1971,16 +1971,15 @@ static int enic_open(struct net_device *netdev)
 		vnic_intr_unmask(&enic->intr[i]);
 
 	enic_notify_timer_start(enic);
-	enic_rfs_flw_tbl_init(enic);
+	enic_rfs_timer_start(enic);
 
 	return 0;
 
 err_out_free_rq:
 	for (i = 0; i < enic->rq_count; i++) {
-		err = vnic_rq_disable(&enic->rq[i]);
-		if (err)
-			return err;
-		vnic_rq_clean(&enic->rq[i], enic_free_rq_buf);
+		ret = vnic_rq_disable(&enic->rq[i]);
+		if (!ret)
+			vnic_rq_clean(&enic->rq[i], enic_free_rq_buf);
 	}
 	enic_dev_notify_unset(enic);
 err_out_free_intr:
@@ -2904,6 +2903,7 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	timer_setup(&enic->notify_timer, enic_notify_timer, 0);
 
+	enic_rfs_flw_tbl_init(enic);
 	enic_set_rx_coal_setting(enic);
 	INIT_WORK(&enic->reset, enic_reset);
 	INIT_WORK(&enic->tx_hang_reset, enic_tx_hang_reset);

drivers/net/ethernet/faraday/ftgmac100.c

@@ -1735,8 +1735,8 @@ static void ftgmac100_ncsi_handler(struct ncsi_dev *nd)
 	if (unlikely(nd->state != ncsi_dev_state_functional))
 		return;
 
-	netdev_info(nd->dev, "NCSI interface %s\n",
-		    nd->link_up ? "up" : "down");
+	netdev_dbg(nd->dev, "NCSI interface %s\n",
+		   nd->link_up ? "up" : "down");
 }
 
 static void ftgmac100_setup_clk(struct ftgmac100 *priv)

drivers/net/ethernet/intel/i40e/i40e_txrx.c

@@ -2103,9 +2103,8 @@ static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring,
 	unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
 #else
 	unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
-				SKB_DATA_ALIGN(I40E_SKB_PAD +
-					       (xdp->data_end -
-						xdp->data_hard_start));
+				SKB_DATA_ALIGN(xdp->data_end -
+					       xdp->data_hard_start);
 #endif
 	struct sk_buff *skb;
 
@@ -2124,7 +2123,7 @@ static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring,
 		return NULL;
 
 	/* update pointers within the skb to store the data */
-	skb_reserve(skb, I40E_SKB_PAD + (xdp->data - xdp->data_hard_start));
+	skb_reserve(skb, xdp->data - xdp->data_hard_start);
 	__skb_put(skb, xdp->data_end - xdp->data);
 	if (metasize)
 		skb_metadata_set(skb, metasize);

drivers/net/ethernet/qlogic/qed/qed_dcbx.c

@@ -255,9 +255,8 @@ qed_dcbx_get_app_protocol_type(struct qed_hwfn *p_hwfn,
 		*type = DCBX_PROTOCOL_ROCE_V2;
 	} else {
 		*type = DCBX_MAX_PROTOCOL_TYPE;
-		DP_ERR(p_hwfn,
-		       "No action required, App TLV id = 0x%x app_prio_bitmap = 0x%x\n",
-		       id, app_prio_bitmap);
+		DP_ERR(p_hwfn, "No action required, App TLV entry = 0x%x\n",
+		       app_prio_bitmap);
 		return false;
 	}
 
@@ -1479,8 +1478,8 @@ static u8 qed_dcbnl_getcap(struct qed_dev *cdev, int capid, u8 *cap)
 		*cap = 0x80;
 		break;
 	case DCB_CAP_ATTR_DCBX:
-		*cap = (DCB_CAP_DCBX_LLD_MANAGED | DCB_CAP_DCBX_VER_CEE |
-			DCB_CAP_DCBX_VER_IEEE | DCB_CAP_DCBX_STATIC);
+		*cap = (DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_VER_IEEE |
+			DCB_CAP_DCBX_STATIC);
 		break;
 	default:
 		*cap = false;
@@ -1548,8 +1547,6 @@ static u8 qed_dcbnl_getdcbx(struct qed_dev *cdev)
 	if (!dcbx_info)
 		return 0;
 
-	if (dcbx_info->operational.enabled)
-		mode |= DCB_CAP_DCBX_LLD_MANAGED;
 	if (dcbx_info->operational.ieee)
 		mode |= DCB_CAP_DCBX_VER_IEEE;
 	if (dcbx_info->operational.cee)

drivers/net/ethernet/qlogic/qed/qed_ll2.c

@@ -201,8 +201,9 @@ void qed_ll2b_complete_rx_packet(void *cxt, struct qed_ll2_comp_rx_data *data)
 
 	skb = build_skb(buffer->data, 0);
 	if (!skb) {
-		rc = -ENOMEM;
-		goto out_post;
+		DP_INFO(cdev, "Failed to build SKB\n");
+		kfree(buffer->data);
+		goto out_post1;
 	}
 
 	data->u.placement_offset += NET_SKB_PAD;
@@ -224,8 +225,14 @@ void qed_ll2b_complete_rx_packet(void *cxt, struct qed_ll2_comp_rx_data *data)
 		cdev->ll2->cbs->rx_cb(cdev->ll2->cb_cookie, skb,
 				      data->opaque_data_0,
 				      data->opaque_data_1);
+	} else {
+		DP_VERBOSE(p_hwfn, (NETIF_MSG_RX_STATUS | NETIF_MSG_PKTDATA |
+				    QED_MSG_LL2 | QED_MSG_STORAGE),
+			   "Dropping the packet\n");
+		kfree(buffer->data);
 	}
 
+out_post1:
 	/* Update Buffer information and update FW producer */
 	buffer->data = new_data;
 	buffer->phys_addr = new_phys_addr;

drivers/net/ethernet/qlogic/qed/qed_main.c

@@ -567,8 +567,16 @@ static irqreturn_t qed_single_int(int irq, void *dev_instance)
 		/* Fastpath interrupts */
 		for (j = 0; j < 64; j++) {
 			if ((0x2ULL << j) & status) {
-				hwfn->simd_proto_handler[j].func(
-					hwfn->simd_proto_handler[j].token);
+				struct qed_simd_fp_handler *p_handler =
+					&hwfn->simd_proto_handler[j];
+
+				if (p_handler->func)
+					p_handler->func(p_handler->token);
+				else
+					DP_NOTICE(hwfn,
+						  "Not calling fastpath handler as it is NULL [handler #%d, status 0x%llx]\n",
+						  j, status);
+
 				status &= ~(0x2ULL << j);
 				rc = IRQ_HANDLED;
 			}

drivers/net/ethernet/stmicro/stmmac/Kconfig

@@ -111,7 +111,7 @@ config DWMAC_ROCKCHIP
 config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
 	default ARCH_SOCFPGA
-	depends on OF && (ARCH_SOCFPGA || COMPILE_TEST)
+	depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST)
 	select MFD_SYSCON
 	help
 	  Support for ethernet controller on Altera SOCFPGA

drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c

@@ -55,6 +55,7 @@ struct socfpga_dwmac {
 	struct	device *dev;
 	struct regmap *sys_mgr_base_addr;
 	struct reset_control *stmmac_rst;
+	struct reset_control *stmmac_ocp_rst;
 	void __iomem *splitter_base;
 	bool f2h_ptp_ref_clk;
 	struct tse_pcs pcs;
@@ -262,8 +263,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
 		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
 
 	/* Assert reset to the enet controller before changing the phy mode */
-	if (dwmac->stmmac_rst)
-		reset_control_assert(dwmac->stmmac_rst);
+	reset_control_assert(dwmac->stmmac_ocp_rst);
+	reset_control_assert(dwmac->stmmac_rst);
 
 	regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
 	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
@@ -288,8 +289,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
 	/* Deassert reset for the phy configuration to be sampled by
 	 * the enet controller, and operation to start in requested mode
 	 */
-	if (dwmac->stmmac_rst)
-		reset_control_deassert(dwmac->stmmac_rst);
+	reset_control_deassert(dwmac->stmmac_ocp_rst);
+	reset_control_deassert(dwmac->stmmac_rst);
 	if (phymode == PHY_INTERFACE_MODE_SGMII) {
 		if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) {
 			dev_err(dwmac->dev, "Unable to initialize TSE PCS");
@@ -324,6 +325,15 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 		goto err_remove_config_dt;
 	}
 
+	dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp");
+	if (IS_ERR(dwmac->stmmac_ocp_rst)) {
+		ret = PTR_ERR(dwmac->stmmac_ocp_rst);
+		dev_err(dev, "error getting reset control of ocp %d\n", ret);
+		goto err_remove_config_dt;
+	}
+
+	reset_control_deassert(dwmac->stmmac_ocp_rst);
+
 	ret = socfpga_dwmac_parse_data(dwmac, dev);
 	if (ret) {
 		dev_err(dev, "Unable to parse OF data\n");

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -928,6 +928,7 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
 static int stmmac_init_phy(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
 	struct phy_device *phydev;
 	char phy_id_fmt[MII_BUS_ID_SIZE + 3];
 	char bus_id[MII_BUS_ID_SIZE];
@@ -968,6 +969,15 @@ static int stmmac_init_phy(struct net_device *dev)
 		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
 					 SUPPORTED_1000baseT_Full);
 
+	/*
+	 * Half-duplex mode not supported with multiqueue
+	 * half-duplex can only works with single queue
+	 */
+	if (tx_cnt > 1)
+		phydev->supported &= ~(SUPPORTED_1000baseT_Half |
+				       SUPPORTED_100baseT_Half |
+				       SUPPORTED_10baseT_Half);
+
 	/*
 	 * Broken HW is sometimes missing the pull-up resistor on the
 	 * MDIO line, which results in reads to non-existent devices returning

drivers/net/ethernet/sun/sungem.c

@@ -60,8 +60,7 @@
 #include <linux/sungem_phy.h>
 #include "sungem.h"
 
-/* Stripping FCS is causing problems, disabled for now */
-#undef STRIP_FCS
+#define STRIP_FCS
 
 #define DEFAULT_MSG	(NETIF_MSG_DRV		| \
 			 NETIF_MSG_PROBE	| \
@@ -435,7 +434,7 @@ static int gem_rxmac_reset(struct gem *gp)
 	writel(desc_dma & 0xffffffff, gp->regs + RXDMA_DBLOW);
 	writel(RX_RING_SIZE - 4, gp->regs + RXDMA_KICK);
 	val = (RXDMA_CFG_BASE | (RX_OFFSET << 10) |
-	       ((14 / 2) << 13) | RXDMA_CFG_FTHRESH_128);
+	       (ETH_HLEN << 13) | RXDMA_CFG_FTHRESH_128);
 	writel(val, gp->regs + RXDMA_CFG);
 	if (readl(gp->regs + GREG_BIFCFG) & GREG_BIFCFG_M66EN)
 		writel(((5 & RXDMA_BLANK_IPKTS) |
@@ -760,7 +759,6 @@ static int gem_rx(struct gem *gp, int work_to_do)
 	struct net_device *dev = gp->dev;
 	int entry, drops, work_done = 0;
 	u32 done;
-	__sum16 csum;
 
 	if (netif_msg_rx_status(gp))
 		printk(KERN_DEBUG "%s: rx interrupt, done: %d, rx_new: %d\n",
@@ -855,9 +853,13 @@ static int gem_rx(struct gem *gp, int work_to_do)
 			skb = copy_skb;
 		}
 
-		csum = (__force __sum16)htons((status & RXDCTRL_TCPCSUM) ^ 0xffff);
-		skb->csum = csum_unfold(csum);
-		skb->ip_summed = CHECKSUM_COMPLETE;
+		if (likely(dev->features & NETIF_F_RXCSUM)) {
+			__sum16 csum;
+
+			csum = (__force __sum16)htons((status & RXDCTRL_TCPCSUM) ^ 0xffff);
+			skb->csum = csum_unfold(csum);
+			skb->ip_summed = CHECKSUM_COMPLETE;
+		}
 		skb->protocol = eth_type_trans(skb, gp->dev);
 
 		napi_gro_receive(&gp->napi, skb);
@@ -1761,7 +1763,7 @@ static void gem_init_dma(struct gem *gp)
 	writel(0, gp->regs + TXDMA_KICK);
 
 	val = (RXDMA_CFG_BASE | (RX_OFFSET << 10) |
-	       ((14 / 2) << 13) | RXDMA_CFG_FTHRESH_128);
+	       (ETH_HLEN << 13) | RXDMA_CFG_FTHRESH_128);
 	writel(val, gp->regs + RXDMA_CFG);
 
 	writel(desc_dma >> 32, gp->regs + RXDMA_DBHI);
@@ -2985,8 +2987,8 @@ static int gem_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_set_drvdata(pdev, dev);
 
 	/* We can do scatter/gather and HW checksum */
-	dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM;
-	dev->features |= dev->hw_features | NETIF_F_RXCSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
+	dev->features = dev->hw_features;
 	if (pci_using_dac)
 		dev->features |= NETIF_F_HIGHDMA;
 

drivers/net/ethernet/ti/davinci_emac.c

@@ -1385,6 +1385,11 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
 		return -EOPNOTSUPP;
 }
 
+static int match_first_device(struct device *dev, void *data)
+{
+	return !strncmp(dev_name(dev), "davinci_mdio", 12);
+}
+
 /**
  * emac_dev_open - EMAC device open
  * @ndev: The DaVinci EMAC network adapter
@@ -1484,8 +1489,14 @@ static int emac_dev_open(struct net_device *ndev)
 
 	/* use the first phy on the bus if pdata did not give us a phy id */
 	if (!phydev && !priv->phy_id) {
-		phy = bus_find_device_by_name(&mdio_bus_type, NULL,
-					      "davinci_mdio");
+		/* NOTE: we can't use bus_find_device_by_name() here because
+		 * the device name is not guaranteed to be 'davinci_mdio'. On
+		 * some systems it can be 'davinci_mdio.0' so we need to use
+		 * strncmp() against the first part of the string to correctly
+		 * match it.
+		 */
+		phy = bus_find_device(&mdio_bus_type, NULL, NULL,
+				      match_first_device);
 		if (phy) {
 			priv->phy_id = dev_name(phy);
 			if (!priv->phy_id || !*priv->phy_id)

drivers/net/hamradio/bpqether.c

@@ -89,10 +89,6 @@
 static const char banner[] __initconst = KERN_INFO \
 	"AX.25: bpqether driver version 004\n";
 
-static char bcast_addr[6]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
-
-static char bpq_eth_addr[6];
-
 static int bpq_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *);
 static int bpq_device_event(struct notifier_block *, unsigned long, void *);
 
@@ -501,8 +497,8 @@ static int bpq_new_device(struct net_device *edev)
 	bpq->ethdev = edev;
 	bpq->axdev = ndev;
 
-	memcpy(bpq->dest_addr, bcast_addr, sizeof(bpq_eth_addr));
-	memcpy(bpq->acpt_addr, bcast_addr, sizeof(bpq_eth_addr));
+	eth_broadcast_addr(bpq->dest_addr);
+	eth_broadcast_addr(bpq->acpt_addr);
 
 	err = register_netdevice(ndev);
 	if (err)

drivers/net/ipvlan/ipvlan_main.c

@@ -693,6 +693,7 @@ void ipvlan_link_setup(struct net_device *dev)
 {
 	ether_setup(dev);
 
+	dev->max_mtu = ETH_MAX_MTU;
 	dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
 	dev->priv_flags |= IFF_UNICAST_FLT | IFF_NO_QUEUE;
 	dev->netdev_ops = &ipvlan_netdev_ops;