Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits)
  bridge: ensure to unlock in error path in br_multicast_query().
  drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
  sky2: Avoid rtnl_unlock without rtnl_lock
  ipv6: Send netlink notification when DAD fails
  drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant
  ipconfig: Handle devices which take some time to come up.
  mac80211: Fix memory leak in ieee80211_if_write()
  mac80211: Fix (dynamic) power save entry
  ipw2200: use kmalloc for large local variables
  ath5k: read eeprom IQ calibration values correctly for G mode
  ath5k: fix I/Q calibration (for real)
  ath5k: fix TSF reset
  ath5k: use fixed antenna for tx descriptors
  libipw: split ieee->networks into small pieces
  mac80211: Fix sta_mtx unlocking on insert STA failure path
  rt2x00: remove KSEG1ADDR define from rt2x00soc.h
  net: add ColdFire support to the smc91x driver
  asix: fix setting mac address for AX88772
  ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}.
  net: Fix dev_mc_add()
  ...

MAINTAINERS

@@ -1405,20 +1405,30 @@ F:	arch/x86/include/asm/calgary.h
 F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
-M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+M:	Oliver Hartkopp <socketcan@hartkopp.net>
 M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+L:	socketcan-core@lists.berlios.de
+L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
-F:	drivers/net/can/
-F:	include/linux/can/
+F:	net/can/
 F:	include/linux/can.h
+F:	include/linux/can/core.h
+F:	include/linux/can/bcm.h
+F:	include/linux/can/raw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+L:	socketcan-core@lists.berlios.de
+L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
+F:	drivers/net/can/
+F:	include/linux/can/dev.h
+F:	include/linux/can/error.h
+F:	include/linux/can/netlink.h
+F:	include/linux/can/platform/
 
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
@@ -2130,6 +2140,7 @@ F:	drivers/net/eexpress.*
 ETHERNET BRIDGE
 M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	bridge@lists.linux-foundation.org
+L:	netdev@vger.kernel.org
 W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
 F:	include/linux/netfilter_bridge/

drivers/net/Kconfig

@@ -907,7 +907,7 @@ config SMC91X
 	select CRC32
 	select MII
 	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
-		MIPS || BLACKFIN || MN10300
+		MIPS || BLACKFIN || MN10300 || COLDFIRE
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it

drivers/net/arm/ks8695net.c

@@ -575,9 +575,9 @@ static int ks8695_poll(struct napi_struct *napi, int budget)
 	if (work_done < budget) {
 		unsigned long flags;
 		spin_lock_irqsave(&ksp->rx_lock, flags);
+		__napi_complete(napi);
 		/*enable rx interrupt*/
 		writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
-		__napi_complete(napi);
 		spin_unlock_irqrestore(&ksp->rx_lock, flags);
 	}
 	return work_done;

drivers/net/benet/be.h

@@ -290,11 +290,6 @@ extern const struct ethtool_ops be_ethtool_ops;
 
 #define drvr_stats(adapter)		(&adapter->stats.drvr_stats)
 
-static inline unsigned int be_pci_func(struct be_adapter *adapter)
-{
-	return PCI_FUNC(adapter->pdev->devfn);
-}
-
 #define BE_SET_NETDEV_OPS(netdev, ops)	(netdev->netdev_ops = ops)
 
 #define PAGE_SHIFT_4K		12

drivers/net/benet/be_cmds.c

@@ -465,8 +465,6 @@ int be_cmd_eq_create(struct be_adapter *adapter,
 
 	req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
 
-	AMAP_SET_BITS(struct amap_eq_context, func, req->context,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
 	/* 4byte eqe*/
 	AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
@@ -629,7 +627,6 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
 	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
 	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, func, ctxt, be_pci_func(adapter));
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
@@ -678,7 +675,6 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 
 	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
 
-	AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
 		be_encoded_q_len(mccq->len));
@@ -727,8 +723,6 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 
 	AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt,
 		be_encoded_q_len(txq->len));
-	AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
 

drivers/net/benet/be_hw.h

@@ -114,8 +114,7 @@
 #define IMG_TYPE_ISCSI_BACKUP		9
 #define IMG_TYPE_FCOE_FW_ACTIVE		10
 #define IMG_TYPE_FCOE_FW_BACKUP 	11
-#define IMG_TYPE_NCSI_BITFILE		13
-#define IMG_TYPE_NCSI_8051		14
+#define IMG_TYPE_NCSI_FW		13
 
 #define FLASHROM_OPER_FLASH		1
 #define FLASHROM_OPER_SAVE		2
@@ -127,6 +126,7 @@
 #define FLASH_IMAGE_MAX_SIZE_g3            (2097152) /* Max fw image size */
 #define FLASH_BIOS_IMAGE_MAX_SIZE_g3       (524288)  /* Max OPTION ROM img sz */
 #define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	  (1048576)  /* Max Redboot image sz */
+#define FLASH_NCSI_IMAGE_MAX_SIZE_g3       (262144)  /* Max NSCI image sz */
 
 #define FLASH_NCSI_MAGIC		(0x16032009)
 #define FLASH_NCSI_DISABLED		(0)
@@ -144,6 +144,7 @@
 #define FLASH_FCoE_BIOS_START_g2           (524288)
 #define FLASH_REDBOOT_START_g2		  (0)
 
+#define FLASH_NCSI_START_g3		   (15990784)
 #define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
 #define FLASH_iSCSI_BACKUP_IMAGE_START_g3  (4194304)
 #define FLASH_FCoE_PRIMARY_IMAGE_START_g3  (6291456)

drivers/net/benet/be_main.c

@@ -1382,7 +1382,7 @@ static int be_rx_queues_create(struct be_adapter *adapter)
 /* There are 8 evt ids per func. Retruns the evt id's bit number */
 static inline int be_evt_bit_get(struct be_adapter *adapter, u32 eq_id)
 {
-	return eq_id - 8 * be_pci_func(adapter);
+	return eq_id % 8;
 }
 
 static irqreturn_t be_intx(int irq, void *dev)
@@ -1880,8 +1880,9 @@ static int be_flash_data(struct be_adapter *adapter,
 	const u8 *p = fw->data;
 	struct be_cmd_write_flashrom *req = flash_cmd->va;
 	struct flash_comp *pflashcomp;
+	int num_comp;
 
-	struct flash_comp gen3_flash_types[8] = {
+	struct flash_comp gen3_flash_types[9] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
@@ -1897,7 +1898,9 @@ static int be_flash_data(struct be_adapter *adapter,
 		{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, IMG_TYPE_FCOE_FW_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_FCoE_BACKUP_IMAGE_START_g3, IMG_TYPE_FCOE_FW_BACKUP,
-			FLASH_IMAGE_MAX_SIZE_g3}
+			FLASH_IMAGE_MAX_SIZE_g3},
+		{ FLASH_NCSI_START_g3, IMG_TYPE_NCSI_FW,
+			FLASH_NCSI_IMAGE_MAX_SIZE_g3}
 	};
 	struct flash_comp gen2_flash_types[8] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
@@ -1921,11 +1924,16 @@ static int be_flash_data(struct be_adapter *adapter,
 	if (adapter->generation == BE_GEN3) {
 		pflashcomp = gen3_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g3);
+		num_comp = 9;
 	} else {
 		pflashcomp = gen2_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g2);
+		num_comp = 8;
 	}
-	for (i = 0; i < 8; i++) {
+	for (i = 0; i < num_comp; i++) {
+		if ((pflashcomp[i].optype == IMG_TYPE_NCSI_FW) &&
+				memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0)
+			continue;
 		if ((pflashcomp[i].optype == IMG_TYPE_REDBOOT) &&
 			(!be_flash_redboot(adapter, fw->data,
 			 pflashcomp[i].offset, pflashcomp[i].size,
@@ -1985,16 +1993,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 	struct be_dma_mem flash_cmd;
 	int status, i = 0;
 	const u8 *p;
-	char fw_ver[FW_VER_LEN];
-	char fw_cfg;
-
-	status = be_cmd_get_fw_ver(adapter, fw_ver);
-	if (status)
-		return status;
 
-	fw_cfg = *(fw_ver + 2);
-	if (fw_cfg == '0')
-		fw_cfg = '1';
 	strcpy(fw_file, func);
 
 	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);

drivers/net/can/bfin_can.c

@@ -26,6 +26,7 @@
 
 #define DRV_NAME "bfin_can"
 #define BFIN_CAN_TIMEOUT 100
+#define TX_ECHO_SKB_MAX  1
 
 /*
  * transmit and receive channels
@@ -593,7 +594,7 @@ struct net_device *alloc_bfin_candev(void)
 	struct net_device *dev;
 	struct bfin_can_priv *priv;
 
-	dev = alloc_candev(sizeof(*priv));
+	dev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX);
 	if (!dev)
 		return NULL;
 

drivers/net/can/usb/ems_usb.c

@@ -876,9 +876,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 	return NETDEV_TX_OK;
 
 nomem:
-	if (skb)
-		dev_kfree_skb(skb);
-
+	dev_kfree_skb(skb);
 	stats->tx_dropped++;
 
 	return NETDEV_TX_OK;

drivers/net/cassini.c

@@ -5072,7 +5072,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	INIT_WORK(&cp->reset_task, cas_reset_task);
 
 	/* Default link parameters */
-	if (link_mode >= 0 && link_mode <= 6)
+	if (link_mode >= 0 && link_mode < 6)
 		cp->link_cntl = link_modes[link_mode];
 	else
 		cp->link_cntl = BMCR_ANENABLE;

drivers/net/cpmac.c

@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 
 #include <linux/netdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
@@ -55,9 +56,9 @@ module_param(dumb_switch, int, 0444);
 MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
 MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
 
-#define CPMAC_VERSION "0.5.1"
-/* frame size + 802.1q tag */
-#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + 4)
+#define CPMAC_VERSION "0.5.2"
+/* frame size + 802.1q tag + FCS size */
+#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
 #define CPMAC_QUEUES	8
 
 /* Ethernet registers */
@@ -1136,8 +1137,9 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
 	}
 
 	if (phy_id == PHY_MAX_ADDR) {
-		dev_err(&pdev->dev, "no PHY present\n");
-		return -ENODEV;
+		dev_err(&pdev->dev, "no PHY present, falling back to switch on MDIO bus 0\n");
+		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+		phy_id = pdev->id;
 	}
 
 	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
@@ -1290,8 +1292,8 @@ void __devexit cpmac_exit(void)
 {
 	platform_driver_unregister(&cpmac_driver);
 	mdiobus_unregister(cpmac_mii);
-	mdiobus_free(cpmac_mii);
 	iounmap(cpmac_mii->priv);
+	mdiobus_free(cpmac_mii);
 }
 
 module_init(cpmac_init);

drivers/net/cxgb3/cxgb3_main.c

@@ -1294,6 +1294,7 @@ static void cxgb_down(struct adapter *adapter)
 
 	free_irq_resources(adapter);
 	quiesce_rx(adapter);
+	t3_sge_stop(adapter);
 	flush_workqueue(cxgb3_wq);	/* wait for external IRQ handler */
 }
 

drivers/net/davinci_emac.c

@@ -2385,7 +2385,7 @@ static int emac_dev_open(struct net_device *ndev)
 	struct emac_priv *priv = netdev_priv(ndev);
 
 	netif_carrier_off(ndev);
-	for (cnt = 0; cnt <= ETH_ALEN; cnt++)
+	for (cnt = 0; cnt < ETH_ALEN; cnt++)
 		ndev->dev_addr[cnt] = priv->mac_addr[cnt];
 
 	/* Configuration items */

drivers/net/e1000e/defines.h

@@ -320,6 +320,8 @@
 #define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
 
 /* Header split receive */
+#define E1000_RFCTL_NFSW_DIS            0x00000040
+#define E1000_RFCTL_NFSR_DIS            0x00000080
 #define E1000_RFCTL_ACK_DIS             0x00001000
 #define E1000_RFCTL_EXTEN               0x00008000
 #define E1000_RFCTL_IPV6_EX_DIS         0x00010000

drivers/net/e1000e/ich8lan.c

@@ -2740,6 +2740,16 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
 		reg &= ~(1 << 31);
 		ew32(STATUS, reg);
 	}
+
+	/*
+	 * work-around descriptor data corruption issue during nfs v2 udp
+	 * traffic, just disable the nfs filtering capability
+	 */
+	reg = er32(RFCTL);
+	reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+	ew32(RFCTL, reg);
+
+	return;
 }
 
 /**

drivers/net/gianfar.c

@@ -2021,7 +2021,6 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */
-	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
 	txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
 			skb_headlen(skb), DMA_TO_DEVICE);
 
@@ -2053,6 +2052,10 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	txbdp_start->lstatus = lstatus;
 
+	eieio(); /* force lstatus write before tx_skbuff */
+
+	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
+
 	/* Update the current skb pointer to the next entry we will use
 	 * (wrapping if necessary) */
 	tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &

drivers/net/irda/irda-usb.c

@@ -1651,6 +1651,8 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	self->rx_urb = kcalloc(self->max_rx_urb, sizeof(struct urb *),
 				GFP_KERNEL);
+	if (!self->rx_urb)
+		goto err_free_net;
 
 	for (i = 0; i < self->max_rx_urb; i++) {
 		self->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
@@ -1783,6 +1785,8 @@ static int irda_usb_probe(struct usb_interface *intf,
 err_out_1:
 	for (i = 0; i < self->max_rx_urb; i++)
 		usb_free_urb(self->rx_urb[i]);
+	kfree(self->rx_urb);
+err_free_net:
 	free_netdev(net);
 err_out:
 	return ret;

drivers/net/qlcnic/qlcnic.h

@@ -423,6 +423,11 @@ struct qlcnic_adapter_stats {
 	u64  lro_pkts;
 	u64  rxbytes;
 	u64  txbytes;
+	u64  lrobytes;
+	u64  lso_frames;
+	u64  xmit_on;
+	u64  xmit_off;
+	u64  skb_alloc_failure;
 };
 
 /*
@@ -1095,11 +1100,11 @@ struct qlcnic_brdinfo {
 
 static const struct qlcnic_brdinfo qlcnic_boards[] = {
 	{0x1077, 0x8020, 0x1077, 0x203,
-		"8200 Series Single Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Single Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x207,
-		"8200 Series Dual Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Dual Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x20b,
 		"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
 	{0x1077, 0x8020, 0x1077, 0x20c,