media: seco-cec: add Consumer-IR support

Introduce support for Consumer-IR into seco-cec driver, as it shares the
same interrupt for receiving messages.
The device decodes RC5 signals only, defaults to hauppauge mapping.
It will spawn an input interface using the RC framework (like CEC
device).

Signed-off-by: Ettore Chimenti <ek5.chimenti@gmail.com>
Reviewed-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/platform/Kconfig

@@ -637,6 +637,16 @@ config VIDEO_SECO_CEC
 	  CEC bus is present in the HDMI connector and enables communication
 	  between compatible devices.
 
+config VIDEO_SECO_RC
+	bool "SECO Boards IR RC5 support"
+	depends on VIDEO_SECO_CEC
+	select RC_CORE
+	help
+	  If you say yes here you will get support for the
+	  SECO Boards Consumer-IR in seco-cec driver.
+	  The embedded controller supports RC5 protocol only, default mapping
+	  is set to rc-hauppauge.
+
 endif #CEC_PLATFORM_DRIVERS
 
 menuconfig SDR_PLATFORM_DRIVERS

drivers/media/platform/seco-cec/seco-cec.c

@@ -26,6 +26,8 @@ struct secocec_data {
 	struct platform_device *pdev;
 	struct cec_adapter *cec_adap;
 	struct cec_notifier *notifier;
+	struct rc_dev *ir;
+	char ir_input_phys[32];
 	int irq;
 };
 
@@ -340,6 +342,114 @@ struct cec_adap_ops secocec_cec_adap_ops = {
 	.adap_transmit = secocec_adap_transmit,
 };
 
+#ifdef CONFIG_VIDEO_SECO_RC
+static int secocec_ir_probe(void *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	int status;
+	u16 val;
+
+	/* Prepare the RC input device */
+	cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE);
+	if (!cec->ir)
+		return -ENOMEM;
+
+	snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys),
+		 "%s/input0", dev_name(dev));
+
+	cec->ir->device_name = dev_name(dev);
+	cec->ir->input_phys = cec->ir_input_phys;
+	cec->ir->input_id.bustype = BUS_HOST;
+	cec->ir->input_id.vendor = 0;
+	cec->ir->input_id.product = 0;
+	cec->ir->input_id.version = 1;
+	cec->ir->driver_name = SECOCEC_DEV_NAME;
+	cec->ir->allowed_protocols = RC_PROTO_BIT_RC5;
+	cec->ir->priv = cec;
+	cec->ir->map_name = RC_MAP_HAUPPAUGE;
+	cec->ir->timeout = MS_TO_NS(100);
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status != 0)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status != 0)
+		goto err;
+
+	/* Enable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status != 0)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  val | SECOCEC_ENABLE_REG_1_IR);
+	if (status != 0)
+		goto err;
+
+	dev_dbg(dev, "IR enabled");
+
+	status = devm_rc_register_device(dev, cec->ir);
+
+	if (status) {
+		dev_err(dev, "Failed to prepare input device");
+		cec->ir = NULL;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+
+	smb_wr16(SECOCEC_ENABLE_REG_1,
+		 val & ~SECOCEC_ENABLE_REG_1_IR);
+
+	dev_dbg(dev, "IR disabled");
+	return status;
+}
+
+static int secocec_ir_rx(struct secocec_data *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	u16 val, status, key, addr, toggle;
+
+	if (!cec->ir)
+		return -ENODEV;
+
+	status = smb_rd16(SECOCEC_IR_READ_DATA, &val);
+	if (status != 0)
+		goto err;
+
+	key = val & SECOCEC_IR_COMMAND_MASK;
+	addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL;
+	toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL;
+
+	rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
+
+	dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key,
+		addr, toggle);
+
+	return 0;
+
+err:
+	dev_err(dev, "IR Receive message failed (%d)", status);
+	return -EIO;
+}
+#else
+static void secocec_ir_rx(struct secocec_data *priv)
+{
+}
+
+static int secocec_ir_probe(void *priv)
+{
+	return 0;
+}
+#endif
+
 static irqreturn_t secocec_irq_handler(int irq, void *priv)
 {
 	struct secocec_data *cec = priv;
@@ -374,7 +484,8 @@ static irqreturn_t secocec_irq_handler(int irq, void *priv)
 
 	if (status_val & SECOCEC_STATUS_REG_1_IR) {
 		val |= SECOCEC_STATUS_REG_1_IR;
-		/* TODO IRDA RX */
+
+		secocec_ir_rx(cec);
 	}
 
 	/*  Reset status register */
@@ -542,6 +653,10 @@ static int secocec_probe(struct platform_device *pdev)
 	if (secocec->notifier)
 		cec_register_cec_notifier(secocec->cec_adap, secocec->notifier);
 
+	ret = secocec_ir_probe(secocec);
+	if (ret)
+		goto err_delete_adapter;
+
 	platform_set_drvdata(pdev, secocec);
 
 	dev_dbg(dev, "Device registered");
@@ -559,7 +674,15 @@ static int secocec_probe(struct platform_device *pdev)
 static int secocec_remove(struct platform_device *pdev)
 {
 	struct secocec_data *secocec = platform_get_drvdata(pdev);
+	u16 val;
+
+	if (secocec->ir) {
+		smb_rd16(SECOCEC_ENABLE_REG_1, &val);
 
+		smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
+
+		dev_dbg(&pdev->dev, "IR disabled");
+	}
 	cec_unregister_adapter(secocec->cec_adap);
 
 	if (secocec->notifier)

drivers/media/platform/seco-cec/seco-cec.h

@@ -99,6 +99,17 @@
 
 #define SECOCEC_IR_READ_DATA		0x3e
 
+/*
+ * IR
+ */
+
+#define SECOCEC_IR_COMMAND_MASK		0x007F
+#define SECOCEC_IR_COMMAND_SHL		0
+#define SECOCEC_IR_ADDRESS_MASK		0x1F00
+#define SECOCEC_IR_ADDRESS_SHL		7
+#define SECOCEC_IR_TOGGLE_MASK		0x8000
+#define SECOCEC_IR_TOGGLE_SHL		15
+
 /*
  * Enabling register
  */