Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: - Consolidation of softirq pending: The softirq mask and its accessors/mutators have many implementations scattered around many architectures. Most do the same things consisting in a field in a per-cpu struct (often irq_cpustat_t) accessed through per-cpu ops. We can provide instead a generic efficient version that most of them can use. In fact s390 is the only exception because the field is stored in lowcore. - Support for level!?! triggered MSI (ARM) Over the past couple of years, we've seen some SoCs coming up with ways of signalling level interrupts using a new flavor of MSIs, where the MSI controller uses two distinct messages: one that raises a virtual line, and one that lowers it. The target MSI controller is in charge of maintaining the state of the line. This allows for a much simplified HW signal routing (no need to have hundreds of discrete lines to signal level interrupts if you already have a memory bus), but results in a departure from the current idea the kernel has of MSIs. - Support for Meson-AXG GPIO irqchip - Large stm32 irqchip rework (suspend/resume, hierarchical domains) - More SPDX conversions * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) ARM: dts: stm32: Add exti support to stm32mp157 pinctrl ARM: dts: stm32: Add exti support for stm32mp157c pinctrl/stm32: Add irq_eoi for stm32gpio irqchip irqchip/stm32: Add suspend/resume support for hierarchy domain irqchip/stm32: Add stm32mp1 support with hierarchy domain irqchip/stm32: Prepare common functions irqchip/stm32: Add host and driver data structures irqchip/stm32: Add suspend support irqchip/stm32: Add falling pending register support irqchip/stm32: Checkpatch fix irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain irqchip/meson-gpio: Add support for Meson-AXG SoCs dt-bindings: interrupt-controller: New binding for Meson-AXG SoC dt-bindings: interrupt-controller: Fix the double quotes softirq/s390: Move default mutators of overwritten softirq mask to s390 softirq/x86: Switch to generic local_softirq_pending() implementation softirq/sparc: Switch to generic local_softirq_pending() implementation softirq/powerpc: Switch to generic local_softirq_pending() implementation softirq/parisc: Switch to generic local_softirq_pending() implementation softirq/ia64: Switch to generic local_softirq_pending() implementation ...
mariux64 · Jun 5, 2018 · db020be · db020be
2 parents d09a8e6 + 65441ba
commit db020be
Show file tree

Hide file tree

Showing 35 changed files with 1,079 additions and 222 deletions.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -9,11 +9,12 @@ number of interrupt exposed depends on the SoC.
 
 Required properties:
 
-- compatible : must have "amlogic,meson8-gpio-intc” and either
-   “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or
-   “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or
-   “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or
-   “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912)
+- compatible : must have "amlogic,meson8-gpio-intc" and either
+    "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
+    "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
+    "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
+    "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
+    "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
 - interrupt-parent : a phandle to the GIC the interrupts are routed to.
    Usually this is provided at the root level of the device tree as it is
    common to most of the SoC.

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -57,6 +57,20 @@ Optional
   occupied by the redistributors. Required if more than one such
   region is present.
 
+- msi-controller: Boolean property. Identifies the node as an MSI
+  controller. Only present if the Message Based Interrupt
+  functionnality is being exposed by the HW, and the mbi-ranges
+  property present.
+
+- mbi-ranges: A list of pairs <intid span>, where "intid" is the first
+  SPI of a range that can be used an MBI, and "span" the size of that
+  range. Multiple ranges can be provided. Requires "msi-controller" to
+  be set.
+
+- mbi-alias: Address property. Base address of an alias of the GICD
+  region containing only the {SET,CLR}SPI registers to be used if
+  isolation is required, and if supported by the HW.
+
 Sub-nodes:
 
 PPI affinity can be expressed as a single "ppi-partitions" node,
@@ -99,6 +113,9 @@ Examples:
 		      <0x0 0x2c020000 0 0x2000>;	// GICV
 		interrupts = <1 9 4>;
 
+		msi-controller;
+		mbi-ranges = <256 128>;
+
 		gic-its@2c200000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;

diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
@@ -5,11 +5,14 @@ Required properties:
 - compatible: Should be:
     "st,stm32-exti"
     "st,stm32h7-exti"
+    "st,stm32mp1-exti"
 - reg: Specifies base physical address and size of the registers
 - interrupt-controller: Indentifies the node as an interrupt controller
 - #interrupt-cells: Specifies the number of cells to encode an interrupt
   specifier, shall be 2
 - interrupts: interrupts references to primary interrupt controller
+  (only needed for exti controller with multiple exti under
+  same parent interrupt: st,stm32-exti and st,stm32h7-exti")
 
 Example:
 

diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -12,6 +12,8 @@
 			#size-cells = <1>;
 			compatible = "st,stm32mp157-pinctrl";
 			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
 			pins-are-numbered;
 
 			gpioa: gpio@50002000 {
@@ -166,6 +168,8 @@
 			compatible = "st,stm32mp157-z-pinctrl";
 			ranges = <0 0x54004000 0x400>;
 			pins-are-numbered;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
 			status = "disabled";
 
 			gpioz: gpio@54004000 {

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -183,6 +183,13 @@
 			status = "disabled";
 		};
 
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+		};
+
 		usart1: serial@5c000000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x5c000000 0x400>;

diff --git a/arch/ia64/include/asm/hardirq.h b/arch/ia64/include/asm/hardirq.h
@@ -13,7 +13,7 @@
 
 #define __ARCH_IRQ_STAT	1
 
-#define local_softirq_pending()		(local_cpu_data->softirq_pending)
+#define local_softirq_pending_ref	ia64_cpu_info.softirq_pending
 
 #include <linux/threads.h>
 #include <linux/irq.h>

diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h
@@ -34,14 +34,6 @@ DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 #define __IRQ_STAT(cpu, member) (irq_stat[cpu].member)
 #define inc_irq_stat(member)	this_cpu_inc(irq_stat.member)
 #define __inc_irq_stat(member)	__this_cpu_inc(irq_stat.member)
-#define local_softirq_pending()	this_cpu_read(irq_stat.__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING
-
-#define set_softirq_pending(x)	\
-		this_cpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x)	this_cpu_or(irq_stat.__softirq_pending, (x))
-
 #define ack_bad_irq(irq) WARN(1, "unexpected IRQ trap at vector %02x\n", irq)
 
 #endif /* _PARISC_HARDIRQ_H */
diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h
@@ -25,15 +25,8 @@ typedef struct {
 DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 
 #define __ARCH_IRQ_STAT
-
-#define local_softirq_pending()	__this_cpu_read(irq_stat.__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING
 #define __ARCH_IRQ_EXIT_IRQS_DISABLED
 
-#define set_softirq_pending(x) __this_cpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x) __this_cpu_or(irq_stat.__softirq_pending, (x))
-
 static inline void ack_bad_irq(unsigned int irq)
 {
 	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);

diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
@@ -14,6 +14,8 @@
 #include <asm/lowcore.h>
 
 #define local_softirq_pending() (S390_lowcore.softirq_pending)
+#define set_softirq_pending(x) (S390_lowcore.softirq_pending = (x))
+#define or_softirq_pending(x)  (S390_lowcore.softirq_pending |= (x))
 
 #define __ARCH_IRQ_STAT
 #define __ARCH_HAS_DO_SOFTIRQ

diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
@@ -44,7 +44,7 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 
 	seq_printf(p, "%*s: ", prec, "NMI");
 	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", irq_stat[j].__nmi_count);
+		seq_printf(p, "%10u ", nmi_count(j));
 	seq_printf(p, "  Non-maskable interrupts\n");
 
 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));

diff --git a/arch/sparc/include/asm/hardirq_64.h b/arch/sparc/include/asm/hardirq_64.h
@@ -10,8 +10,9 @@
 #include <asm/cpudata.h>
 
 #define __ARCH_IRQ_STAT
-#define local_softirq_pending() \
-	(local_cpu_data().__softirq_pending)
+
+#define local_softirq_pending_ref \
+	__cpu_data.__softirq_pending
 
 void ack_bad_irq(unsigned int irq);
 

diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
@@ -50,14 +50,6 @@ DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 
 #define inc_irq_stat(member)	this_cpu_inc(irq_stat.member)
 
-#define local_softirq_pending()	this_cpu_read(irq_stat.__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING
-
-#define set_softirq_pending(x)	\
-		this_cpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x)	this_cpu_or(irq_stat.__softirq_pending, (x))
-
 extern void ack_bad_irq(unsigned int irq);
 
 extern u64 arch_irq_stat_cpu(unsigned int cpu);

diff --git a/drivers/base/platform-msi.c b/drivers/base/platform-msi.c
@@ -101,6 +101,9 @@ static void platform_msi_update_chip_ops(struct msi_domain_info *info)
 		chip->irq_set_affinity = msi_domain_set_affinity;
 	if (!chip->irq_write_msi_msg)
 		chip->irq_write_msi_msg = platform_msi_write_msg;
+	if (WARN_ON((info->flags & MSI_FLAG_LEVEL_CAPABLE) &&
+		    !(chip->flags & IRQCHIP_SUPPORTS_LEVEL_MSI)))
+		info->flags &= ~MSI_FLAG_LEVEL_CAPABLE;
 }
 
 static void platform_msi_free_descs(struct device *dev, int base, int nvec)

diff --git a/drivers/bus/fsl-mc/fsl-mc-msi.c b/drivers/bus/fsl-mc/fsl-mc-msi.c
@@ -163,6 +163,8 @@ struct irq_domain *fsl_mc_msi_create_irq_domain(struct fwnode_handle *fwnode,
 {
 	struct irq_domain *domain;
 
+	if (WARN_ON((info->flags & MSI_FLAG_LEVEL_CAPABLE)))
+		info->flags &= ~MSI_FLAG_LEVEL_CAPABLE;
 	if (info->flags & MSI_FLAG_USE_DEF_DOM_OPS)
 		fsl_mc_msi_update_dom_ops(info);
 	if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS)

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_PM)		+= irq-gic-pm.o
 obj-$(CONFIG_ARCH_REALVIEW)		+= irq-gic-realview.o
 obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
-obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
+obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-v3-mbi.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_V3_ITS)		+= irq-gic-v3-its.o irq-gic-v3-its-platform-msi.o irq-gic-v4.o
 obj-$(CONFIG_ARM_GIC_V3_ITS_PCI)	+= irq-gic-v3-its-pci-msi.o
 obj-$(CONFIG_ARM_GIC_V3_ITS_FSL_MC)	+= irq-gic-v3-its-fsl-mc-msi.o