[SCSI] pm8001: add SAS/SATA HBA driver

This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based
host adapters.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: Tom Peng <tom_peng@usish.com>
Signed-off-by: Kevin Ao <aoqingyun@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

MAINTAINERS

@@ -4116,6 +4116,13 @@ W:	http://www.pmc-sierra.com/
 S:	Supported
 F:	drivers/scsi/pmcraid.*
 
+PMC SIERRA PM8001 DRIVER
+M:	jack_wang@usish.com
+M:	lindar_liu@usish.com
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	drivers/scsi/pm8001/
+
 POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Supported

drivers/scsi/Kconfig

@@ -1818,6 +1818,14 @@ config SCSI_PMCRAID
 	---help---
 	  This driver supports the PMC SIERRA MaxRAID adapters.
 
+config SCSI_PM8001
+	tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
+	depends on PCI && SCSI
+	select SCSI_SAS_LIBSAS
+	help
+	  This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
+	  based host adapters.
+
 config SCSI_SRP
 	tristate "SCSI RDMA Protocol helper library"
 	depends on SCSI && PCI

drivers/scsi/Makefile

@@ -70,6 +70,7 @@ obj-$(CONFIG_SCSI_AIC79XX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AACRAID)	+= aacraid/
 obj-$(CONFIG_SCSI_AIC7XXX_OLD)	+= aic7xxx_old.o
 obj-$(CONFIG_SCSI_AIC94XX)	+= aic94xx/
+obj-$(CONFIG_SCSI_PM8001)	+= pm8001/
 obj-$(CONFIG_SCSI_IPS)		+= ips.o
 obj-$(CONFIG_SCSI_FD_MCS)	+= fd_mcs.o
 obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o

drivers/scsi/pm8001/Makefile

@@ -0,0 +1,12 @@
+#
+# Kernel configuration file for the PM8001 SAS/SATA 8x6G based HBA driver
+#
+# Copyright (C) 2008-2009  USI Co., Ltd.
+
+
+obj-$(CONFIG_SCSI_PM8001) += pm8001.o
+pm8001-y += pm8001_init.o \
+		pm8001_sas.o  \
+		pm8001_ctl.o  \
+		pm8001_hwi.o
+

drivers/scsi/pm8001/pm8001_chips.h

@@ -0,0 +1,89 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_CHIPS_H_
+#define _PM8001_CHIPS_H_
+
+static inline u32 pm8001_read_32(void *virt_addr)
+{
+	return *((u32 *)virt_addr);
+}
+
+static inline void pm8001_write_32(void *addr, u32 offset, u32 val)
+{
+	*((u32 *)(addr + offset)) = val;
+}
+
+static inline u32 pm8001_cr32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+		u32 offset)
+{
+	return readl(pm8001_ha->io_mem[bar].memvirtaddr + offset);
+}
+
+static inline void pm8001_cw32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+		u32 addr, u32 val)
+{
+	writel(val, pm8001_ha->io_mem[bar].memvirtaddr + addr);
+}
+static inline u32 pm8001_mr32(void __iomem *addr, u32 offset)
+{
+	return readl(addr + offset);
+}
+static inline void pm8001_mw32(void __iomem *addr, u32 offset, u32 val)
+{
+	writel(val, addr + offset);
+}
+static inline u32 get_pci_bar_index(u32 pcibar)
+{
+		switch (pcibar) {
+		case 0x18:
+		case 0x1C:
+			return 1;
+		case 0x20:
+			return 2;
+		case 0x24:
+			return 3;
+		default:
+			return 0;
+	}
+}
+
+#endif  /* _PM8001_CHIPS_H_ */
+