Merge branch 'for-4.9/drivers' into for-next

Documentation/devicetree/bindings/pwm/pwm-meson.txt

@@ -0,0 +1,23 @@
+Amlogic Meson PWM Controller
+============================
+
+Required properties:
+- compatible: Shall contain "amlogic,meson8b-pwm" or "amlogic,meson-gxbb-pwm".
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+  the cells format.
+
+Optional properties:
+- clocks: Could contain one or two parents clocks phandle for each of the two
+  PWM channels.
+- clock-names: Could contain at least the "clkin0" and/or "clkin1" names.
+
+Example:
+
+	pwm_ab: pwm@8550 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x08550 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+		clocks = <&xtal>, <&xtal>;
+		clock-names = "clkin0", "clkin1";
+	}

Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt

@@ -2,8 +2,9 @@ MediaTek display PWM controller
 
 Required properties:
  - compatible: should be "mediatek,<name>-disp-pwm":
-   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
+   - "mediatek,mt2701-disp-pwm": found on mt2701 SoC.
    - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
+   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
    the cell format.

Documentation/devicetree/bindings/pwm/pwm-st.txt

@@ -13,13 +13,14 @@ Required parameters:
 - pinctrl-0: 		List of phandles pointing to pin configuration nodes
 			for PWM module.
 			For Pinctrl properties, please refer to [1].
-- clock-names: 		Set to "pwm".
+- clock-names: 		Valid entries are "pwm" and/or "capture".
 - clocks: 		phandle of the clock used by the PWM module.
 			For Clk properties, please refer to [2].
+- interrupts:		IRQ for the Capture device
 
 Optional properties:
-- st,pwm-num-chan:	Number of available channels. If not passed, the driver
-			will consider single channel by default.
+- st,pwm-num-chan:	Number of available PWM channels.  Default is 0.
+- st,capture-num-chan:	Number of available Capture channels.  Default is 0.
 
 [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -38,4 +39,5 @@ pwm1: pwm@fe510000 {
 	clocks = <&clk_sysin>;
 	clock-names = "pwm";
 	st,pwm-num-chan = <4>;
+	st,capture-num-chan = <2>;
 };

Documentation/devicetree/bindings/pwm/pwm-sun4i.txt

@@ -6,6 +6,7 @@ Required properties:
     - "allwinner,sun5i-a10s-pwm"
     - "allwinner,sun5i-a13-pwm"
     - "allwinner,sun7i-a20-pwm"
+    - "allwinner,sun8i-h3-pwm"
   - reg: physical base address and length of the controller's registers
   - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
     the cells format.

drivers/pwm/Kconfig

@@ -262,6 +262,15 @@ config PWM_LPSS_PLATFORM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-lpss-platform.
 
+config PWM_MESON
+	tristate "Amlogic Meson PWM driver"
+	depends on ARCH_MESON
+	help
+	  The platform driver for Amlogic Meson PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-meson.
+
 config PWM_MTK_DISP
 	tristate "MediaTek display PWM driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST

drivers/pwm/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o
 obj-$(CONFIG_PWM_LPSS)		+= pwm-lpss.o
 obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
 obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
+obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o
 obj-$(CONFIG_PWM_MTK_DISP)	+= pwm-mtk-disp.o
 obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
 obj-$(CONFIG_PWM_OMAP_DMTIMER)	+= pwm-omap-dmtimer.o

drivers/pwm/pwm-berlin.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
+#include <linux/slab.h>
 
 #define BERLIN_PWM_EN			0x0
 #define  BERLIN_PWM_ENABLE		BIT(0)
@@ -27,6 +28,13 @@
 #define BERLIN_PWM_TCNT			0xc
 #define  BERLIN_PWM_MAX_TCNT		65535
 
+struct berlin_pwm_channel {
+	u32 enable;
+	u32 ctrl;
+	u32 duty;
+	u32 tcnt;
+};
+
 struct berlin_pwm_chip {
 	struct pwm_chip chip;
 	struct clk *clk;
@@ -55,6 +63,25 @@ static inline void berlin_pwm_writel(struct berlin_pwm_chip *chip,
 	writel_relaxed(value, chip->base + channel * 0x10 + offset);
 }
 
+static int berlin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_channel *channel;
+
+	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+	if (!channel)
+		return -ENOMEM;
+
+	return pwm_set_chip_data(pwm, channel);
+}
+
+static void berlin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_channel *channel = pwm_get_chip_data(pwm);
+
+	pwm_set_chip_data(pwm, NULL);
+	kfree(channel);
+}
+
 static int berlin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm_dev,
 			     int duty_ns, int period_ns)
 {
@@ -137,6 +164,8 @@ static void berlin_pwm_disable(struct pwm_chip *chip,
 }
 
 static const struct pwm_ops berlin_pwm_ops = {
+	.request = berlin_pwm_request,
+	.free = berlin_pwm_free,
 	.config = berlin_pwm_config,
 	.set_polarity = berlin_pwm_set_polarity,
 	.enable = berlin_pwm_enable,
@@ -204,12 +233,67 @@ static int berlin_pwm_remove(struct platform_device *pdev)
 	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int berlin_pwm_suspend(struct device *dev)
+{
+	struct berlin_pwm_chip *pwm = dev_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < pwm->chip.npwm; i++) {
+		struct berlin_pwm_channel *channel;
+
+		channel = pwm_get_chip_data(&pwm->chip.pwms[i]);
+		if (!channel)
+			continue;
+
+		channel->enable = berlin_pwm_readl(pwm, i, BERLIN_PWM_ENABLE);
+		channel->ctrl = berlin_pwm_readl(pwm, i, BERLIN_PWM_CONTROL);
+		channel->duty = berlin_pwm_readl(pwm, i, BERLIN_PWM_DUTY);
+		channel->tcnt = berlin_pwm_readl(pwm, i, BERLIN_PWM_TCNT);
+	}
+
+	clk_disable_unprepare(pwm->clk);
+
+	return 0;
+}
+
+static int berlin_pwm_resume(struct device *dev)
+{
+	struct berlin_pwm_chip *pwm = dev_get_drvdata(dev);
+	unsigned int i;
+	int ret;
+
+	ret = clk_prepare_enable(pwm->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < pwm->chip.npwm; i++) {
+		struct berlin_pwm_channel *channel;
+
+		channel = pwm_get_chip_data(&pwm->chip.pwms[i]);
+		if (!channel)
+			continue;
+
+		berlin_pwm_writel(pwm, i, channel->ctrl, BERLIN_PWM_CONTROL);
+		berlin_pwm_writel(pwm, i, channel->duty, BERLIN_PWM_DUTY);
+		berlin_pwm_writel(pwm, i, channel->tcnt, BERLIN_PWM_TCNT);
+		berlin_pwm_writel(pwm, i, channel->enable, BERLIN_PWM_ENABLE);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(berlin_pwm_pm_ops, berlin_pwm_suspend,
+			 berlin_pwm_resume);
+
 static struct platform_driver berlin_pwm_driver = {
 	.probe = berlin_pwm_probe,
 	.remove = berlin_pwm_remove,
 	.driver = {
 		.name = "berlin-pwm",
 		.of_match_table = berlin_pwm_match,
+		.pm = &berlin_pwm_pm_ops,
 	},
 };
 module_platform_driver(berlin_pwm_driver);

drivers/pwm/pwm-cros-ec.c

@@ -38,7 +38,7 @@ static int cros_ec_pwm_set_duty(struct cros_ec_device *ec, u8 index, u16 duty)
 	struct {
 		struct cros_ec_command msg;
 		struct ec_params_pwm_set_duty params;
-	} buf;
+	} __packed buf;
 	struct ec_params_pwm_set_duty *params = &buf.params;
 	struct cros_ec_command *msg = &buf.msg;
 
@@ -65,7 +65,7 @@ static int __cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index,
 			struct ec_params_pwm_get_duty params;
 			struct ec_response_pwm_get_duty resp;
 		};
-	} buf;
+	} __packed buf;
 	struct ec_params_pwm_get_duty *params = &buf.params;
 	struct ec_response_pwm_get_duty *resp = &buf.resp;
 	struct cros_ec_command *msg = &buf.msg;

drivers/pwm/pwm-lpc18xx-sct.c

@@ -413,14 +413,18 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < lpc18xx_pwm->chip.npwm; i++) {
+		struct lpc18xx_pwm_data *data;
+
 		pwm = &lpc18xx_pwm->chip.pwms[i];
-		pwm->chip_data = devm_kzalloc(lpc18xx_pwm->dev,
-					      sizeof(struct lpc18xx_pwm_data),
-					      GFP_KERNEL);
-		if (!pwm->chip_data) {
+
+		data = devm_kzalloc(lpc18xx_pwm->dev, sizeof(*data),
+				    GFP_KERNEL);
+		if (!data) {
 			ret = -ENOMEM;
 			goto remove_pwmchip;
 		}
+
+		pwm_set_chip_data(pwm, data);
 	}
 
 	platform_set_drvdata(pdev, lpc18xx_pwm);