net: hns3: rename gl_adapt_enable in struct hns3_enet_coalesce

Besides GL(Gap Limiting), QL(Quantity Limiting) can be modified
dynamically when DIM is supported. So rename gl_adapt_enable as
adapt_enable in struct hns3_enet_coalesce.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c

@@ -211,8 +211,8 @@ void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
 	 * GL and RL(Rate Limiter) are 2 ways to acheive interrupt coalescing
 	 */
 
-	if (rl_reg > 0 && !tqp_vector->tx_group.coal.gl_adapt_enable &&
-	    !tqp_vector->rx_group.coal.gl_adapt_enable)
+	if (rl_reg > 0 && !tqp_vector->tx_group.coal.adapt_enable &&
+	    !tqp_vector->rx_group.coal.adapt_enable)
 		/* According to the hardware, the range of rl_reg is
 		 * 0-59 and the unit is 4.
 		 */
@@ -273,8 +273,8 @@ static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
 	 *
 	 * Default: enable interrupt coalescing self-adaptive and GL
 	 */
-	tx_coal->gl_adapt_enable = 1;
-	rx_coal->gl_adapt_enable = 1;
+	tx_coal->adapt_enable = 1;
+	rx_coal->adapt_enable = 1;
 
 	tx_coal->int_gl = HNS3_INT_GL_50K;
 	rx_coal->int_gl = HNS3_INT_GL_50K;
@@ -3384,14 +3384,14 @@ static void hns3_update_new_int_gl(struct hns3_enet_tqp_vector *tqp_vector)
 			tqp_vector->last_jiffies + msecs_to_jiffies(1000)))
 		return;
 
-	if (rx_group->coal.gl_adapt_enable) {
+	if (rx_group->coal.adapt_enable) {
 		rx_update = hns3_get_new_int_gl(rx_group);
 		if (rx_update)
 			hns3_set_vector_coalesce_rx_gl(tqp_vector,
 						       rx_group->coal.int_gl);
 	}
 
-	if (tx_group->coal.gl_adapt_enable) {
+	if (tx_group->coal.adapt_enable) {
 		tx_update = hns3_get_new_int_gl(tx_group);
 		if (tx_update)
 			hns3_set_vector_coalesce_tx_gl(tqp_vector,

drivers/net/ethernet/hisilicon/hns3/hns3_enet.h

@@ -436,7 +436,7 @@ struct hns3_enet_coalesce {
 	u16 int_gl;
 	u16 int_ql;
 	u16 int_ql_max;
-	u8 gl_adapt_enable:1;
+	u8 adapt_enable:1;
 	u8 ql_enable:1;
 	u8 unit_1us:1;
 	enum hns3_flow_level_range flow_level;

drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c

@@ -1105,9 +1105,9 @@ static int hns3_get_coalesce_per_queue(struct net_device *netdev, u32 queue,
 	rx_vector = priv->ring[queue_num + queue].tqp_vector;
 
 	cmd->use_adaptive_tx_coalesce =
-			tx_vector->tx_group.coal.gl_adapt_enable;
+			tx_vector->tx_group.coal.adapt_enable;
 	cmd->use_adaptive_rx_coalesce =
-			rx_vector->rx_group.coal.gl_adapt_enable;
+			rx_vector->rx_group.coal.adapt_enable;
 
 	cmd->tx_coalesce_usecs = tx_vector->tx_group.coal.int_gl;
 	cmd->rx_coalesce_usecs = rx_vector->rx_group.coal.int_gl;
@@ -1268,9 +1268,9 @@ static void hns3_set_coalesce_per_queue(struct net_device *netdev,
 	tx_vector = priv->ring[queue].tqp_vector;
 	rx_vector = priv->ring[queue_num + queue].tqp_vector;
 
-	tx_vector->tx_group.coal.gl_adapt_enable =
+	tx_vector->tx_group.coal.adapt_enable =
 				cmd->use_adaptive_tx_coalesce;
-	rx_vector->rx_group.coal.gl_adapt_enable =
+	rx_vector->rx_group.coal.adapt_enable =
 				cmd->use_adaptive_rx_coalesce;
 
 	tx_vector->tx_group.coal.int_gl = cmd->tx_coalesce_usecs;