net/mlx4_core: Support more than 64 VFs

We now allow up to 126 VFs. Note though that certain firmware
versions only allow up to 80 VFs. Moreover, old HCAs only support 64 VFs.
In these cases, we limit the maximum number of VFs to 64.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -143,7 +143,8 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
 		[14] = "Ethernet protocol control support",
 		[15] = "Ethernet Backplane autoneg support",
 		[16] = "CONFIG DEV support",
-		[17] = "Asymmetric EQs support"
+		[17] = "Asymmetric EQs support",
+		[18] = "More than 80 VFs support"
 	};
 	int i;
 
@@ -860,6 +861,8 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_VLAN_CONTROL;
 	if (field32 & (1 << 20))
 		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_FSM;
+	if (field32 & (1 << 21))
+		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_80_VFS;
 
 	if (dev->flags & MLX4_FLAG_OLD_PORT_CMDS) {
 		for (i = 1; i <= dev_cap->num_ports; ++i) {

drivers/net/ethernet/mellanox/mlx4/main.c

@@ -2373,6 +2373,24 @@ static u64 mlx4_enable_sriov(struct mlx4_dev *dev, struct pci_dev *pdev,
 	return dev_flags & ~MLX4_FLAG_MASTER;
 }
 
+enum {
+	MLX4_DEV_CAP_CHECK_NUM_VFS_ABOVE_64 = -1,
+};
+
+static int mlx4_check_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap,
+			      int *nvfs)
+{
+	int requested_vfs = nvfs[0] + nvfs[1] + nvfs[2];
+	/* Checking for 64 VFs as a limitation of CX2 */
+	if (!(dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_80_VFS) &&
+	    requested_vfs >= 64) {
+		mlx4_err(dev, "Requested %d VFs, but FW does not support more than 64\n",
+			 requested_vfs);
+		return MLX4_DEV_CAP_CHECK_NUM_VFS_ABOVE_64;
+	}
+	return 0;
+}
+
 static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data,
 			 int total_vfs, int *nvfs, struct mlx4_priv *priv)
 {
@@ -2484,6 +2502,9 @@ static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data,
 				goto err_fw;
 			}
 
+			if (mlx4_check_dev_cap(dev, dev_cap, nvfs))
+				goto err_fw;
+
 			if (!(dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_SYS_EQS)) {
 				u64 dev_flags = mlx4_enable_sriov(dev, pdev, total_vfs,
 								  existing_vfs);
@@ -2512,6 +2533,9 @@ static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data,
 				mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");
 				goto err_fw;
 			}
+
+			if (mlx4_check_dev_cap(dev, dev_cap, nvfs))
+				goto err_fw;
 		}
 	}
 

include/linux/mlx4/device.h

@@ -95,7 +95,7 @@ enum {
 
 enum {
 	MLX4_MAX_NUM_PF		= 16,
-	MLX4_MAX_NUM_VF		= 64,
+	MLX4_MAX_NUM_VF		= 126,
 	MLX4_MAX_NUM_VF_P_PORT  = 64,
 	MLX4_MFUNC_MAX		= 80,
 	MLX4_MAX_EQ_NUM		= 1024,
@@ -190,7 +190,8 @@ enum {
 	MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL        = 1LL <<  14,
 	MLX4_DEV_CAP_FLAG2_ETH_BACKPL_AN_REP	= 1LL <<  15,
 	MLX4_DEV_CAP_FLAG2_CONFIG_DEV		= 1LL <<  16,
-	MLX4_DEV_CAP_FLAG2_SYS_EQS		= 1LL <<  17
+	MLX4_DEV_CAP_FLAG2_SYS_EQS		= 1LL <<  17,
+	MLX4_DEV_CAP_FLAG2_80_VFS		= 1LL <<  18
 };
 
 enum {