MIPS: use dma_direct_ops for coherent I/O

Switch the simple cache coherent architectures that don't require any
DMA address translation to dma_direct_ops.

We'll soon use at least parts of the direct DMA ops implementation for
all platforms, so select the symbol globally.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/19540/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tom Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mips@linux-mips.org

arch/mips/Kconfig

@@ -16,6 +16,7 @@ config MIPS
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select CPU_PM if CPU_IDLE
+	select DMA_DIRECT_OPS
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE
@@ -569,7 +570,6 @@ config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	help
 	  This enables support for the NEC Electronics Mark-eins boards.
 
@@ -583,14 +583,12 @@ config MACH_VR41XX
 
 config NXP_STB220
 	bool "NXP STB220 board"
-	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	help
 	 Support for NXP Semiconductors STB220 Development Board.
 
 config NXP_STB225
 	bool "NXP 225 board"
-	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	select SOC_PNX8335
 	help
@@ -768,7 +766,6 @@ config SGI_IP32
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -778,7 +775,6 @@ config SIBYTE_CRHINE
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -788,7 +784,6 @@ config SIBYTE_CARMEL
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -799,7 +794,6 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125H
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -810,7 +804,6 @@ config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -823,7 +816,6 @@ config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -834,7 +826,6 @@ config SIBYTE_LITTLESUR
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -844,7 +835,6 @@ config SIBYTE_SENTOSA
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select NR_CPUS_DEFAULT_4
 	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
@@ -965,7 +955,6 @@ config NLM_XLR_BOARD
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -992,7 +981,6 @@ config NLM_XLP_BOARD
 	select SYS_HAS_CPU_XLP
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select PHYS_ADDR_T_64BIT
@@ -1018,7 +1006,6 @@ config MIPS_PARAVIRT
 	bool "Para-Virtualized guest system"
 	select CEVT_R4K
 	select CSRC_R4K
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN

arch/mips/include/asm/dma-mapping.h

@@ -20,7 +20,7 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 #elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
 #else
-	return NULL;
+	return &dma_direct_ops;
 #endif
 }