Merge branch 'ipa-cfg-data-updates'

Alex Elder says:

====================
net: ipa: more configuration data updates

This series starts with two patches that should have been included
in an earlier series.  With these in place, QSB settings are
programmed from information found in the data files rather than
being embedded in code.  Support is then added for reprenting
another QSB property (supported for IPA v4.0+).

The third patch updates the definition of the sequencer type used
for an endpoint.  Previously a set of 2-byte symbols with fairly
long names defined the sequencer type, but now those are broken into
1-byte halves whose names are a little more informative.

The fourth patch moves the sequencer type definition so it only
applies to TX endpoints (they aren't valid for RX endpoints).  And
the last makes some minor documentation updates.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ipa/ipa_data-sc7180.c

@@ -14,6 +14,7 @@ static const struct ipa_qsb_data ipa_qsb_data[] = {
 	[IPA_QSB_MASTER_DDR] = {
 		.max_writes	= 8,
 		.max_reads	= 12,
+		/* no outstanding read byte (beat) limit */
 	},
 };
 
@@ -30,11 +31,13 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
 			.tlv_count	= 20,
 		},
 		.endpoint = {
-			.seq_type	= IPA_SEQ_DMA_ONLY,
 			.config = {
 				.resource_group	= 0,
 				.dma_mode	= true,
 				.dma_endpoint	= IPA_ENDPOINT_AP_LAN_RX,
+				.tx = {
+					.seq_type = IPA_SEQ_DMA,
+				},
 			},
 		},
 	},
@@ -49,7 +52,6 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
 			.tlv_count	= 6,
 		},
 		.endpoint = {
-			.seq_type	= IPA_SEQ_INVALID,
 			.config = {
 				.resource_group	= 0,
 				.aggregation	= true,
@@ -72,14 +74,14 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
 		},
 		.endpoint = {
 			.filter_support	= true,
-			.seq_type	=
-				IPA_SEQ_PKT_PROCESS_NO_DEC_NO_UCP_DMAP,
 			.config = {
 				.resource_group	= 0,
 				.checksum	= true,
 				.qmap		= true,
 				.status_enable	= true,
 				.tx = {
+					.seq_type = IPA_SEQ_1_PASS_SKIP_LAST_UC,
+					.seq_rep_type = IPA_SEQ_REP_DMA_PARSER,
 					.status_endpoint =
 						IPA_ENDPOINT_MODEM_AP_RX,
 				},
@@ -97,7 +99,6 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
 			.tlv_count	= 6,
 		},
 		.endpoint = {
-			.seq_type	= IPA_SEQ_INVALID,
 			.config = {
 				.resource_group	= 0,
 				.checksum	= true,

drivers/net/ipa/ipa_data-sdm845.c

@@ -36,11 +36,13 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
 			.tlv_count	= 20,
 		},
 		.endpoint = {
-			.seq_type	= IPA_SEQ_DMA_ONLY,
 			.config = {
 				.resource_group	= 1,
 				.dma_mode	= true,
 				.dma_endpoint	= IPA_ENDPOINT_AP_LAN_RX,
+				.tx = {
+					.seq_type = IPA_SEQ_DMA,
+				},
 			},
 		},
 	},
@@ -55,7 +57,6 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
 			.tlv_count	= 8,
 		},
 		.endpoint = {
-			.seq_type	= IPA_SEQ_INVALID,
 			.config = {
 				.resource_group	= 1,
 				.aggregation	= true,
@@ -78,14 +79,13 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
 		},
 		.endpoint = {
 			.filter_support	= true,
-			.seq_type	=
-				IPA_SEQ_2ND_PKT_PROCESS_PASS_NO_DEC_UCP,
 			.config = {
 				.resource_group	= 1,
 				.checksum	= true,
 				.qmap		= true,
 				.status_enable	= true,
 				.tx = {
+					.seq_type = IPA_SEQ_2_PASS_SKIP_LAST_UC,
 					.status_endpoint =
 						IPA_ENDPOINT_MODEM_AP_RX,
 				},
@@ -103,7 +103,6 @@ static const struct ipa_gsi_endpoint_data ipa_gsi_endpoint_data[] = {
 			.tlv_count	= 8,
 		},
 		.endpoint = {
-			.seq_type	= IPA_SEQ_INVALID,
 			.config = {
 				.resource_group	= 1,
 				.checksum	= true,

drivers/net/ipa/ipa_data.h

@@ -18,8 +18,9 @@
  * Boot-time configuration data is used to define the configuration of the
  * IPA and GSI resources to use for a given platform.  This data is supplied
  * via the Device Tree match table, associated with a particular compatible
- * string.  The data defines information about resources, endpoints, and
- * channels.
+ * string.  The data defines information about how resources, endpoints and
+ * channels, memory, clocking and so on are allocated and used for the
+ * platform.
  *
  * Resources are data structures used internally by the IPA hardware.  The
  * configuration data defines the number (or limits of the number) of various
@@ -59,10 +60,12 @@ enum ipa_qsb_master_id {
  * struct ipa_qsb_data - Qualcomm System Bus configuration data
  * @max_writes:	Maximum outstanding write requests for this master
  * @max_reads:	Maximum outstanding read requests for this master
+ * @max_reads_beats: Max outstanding read bytes in 8-byte "beats" (if non-zero)
  */
 struct ipa_qsb_data {
 	u8 max_writes;
 	u8 max_reads;
+	u8 max_reads_beats;		/* Not present for IPA v3.5.1 */
 };
 
 /**
@@ -73,10 +76,10 @@ struct ipa_qsb_data {
  *
  * A GSI channel is a unidirectional means of transferring data to or
  * from (and through) the IPA.  A GSI channel has a ring buffer made
- * up of "transfer elements" (TREs) that specify individual data transfers
- * or IPA immediate commands.  TREs are filled by the AP, and control
- * is passed to IPA hardware by writing the last written element
- * into a doorbell register.
+ * up of "transfer ring elements" (TREs) that specify individual data
+ * transfers or IPA immediate commands.  TREs are filled by the AP,
+ * and control is passed to IPA hardware by writing the last written
+ * element into a doorbell register.
  *
  * When data transfer commands have completed the GSI generates an
  * event (a structure of data) and optionally signals the AP with
@@ -95,12 +98,16 @@ struct gsi_channel_data {
 
 /**
  * struct ipa_endpoint_tx_data - configuration data for TX endpoints
+ * @seq_type:		primary packet processing sequencer type
+ * @seq_rep_type:	sequencer type for replication processing
  * @status_endpoint:	endpoint to which status elements are sent
  *
  * The @status_endpoint is only valid if the endpoint's @status_enable
  * flag is set.
  */
 struct ipa_endpoint_tx_data {
+	enum ipa_seq_type seq_type;
+	enum ipa_seq_rep_type seq_rep_type;
 	enum ipa_endpoint_name status_endpoint;
 };
 
@@ -152,7 +159,6 @@ struct ipa_endpoint_config_data {
 /**
  * struct ipa_endpoint_data - IPA endpoint configuration data
  * @filter_support:	whether endpoint supports filtering
- * @seq_type:		hardware sequencer type used for endpoint
  * @config:		hardware configuration (see above)
  *
  * Not all endpoints support the IPA filtering capability.  A filter table
@@ -162,14 +168,10 @@ struct ipa_endpoint_config_data {
  * in the system, and indicate whether they support filtering.
  *
  * The remaining endpoint configuration data applies only to AP endpoints.
- * The IPA hardware is implemented by sequencers, and the AP must program
- * the type(s) of these sequencers at initialization time.  The remaining
- * endpoint configuration data is defined above.
  */
 struct ipa_endpoint_data {
 	bool filter_support;
-	/* The next two are specified only for AP endpoints */
-	enum ipa_seq_type seq_type;
+	/* Everything else is specified only for AP endpoints */
 	struct ipa_endpoint_config_data config;
 };
 
@@ -263,7 +265,7 @@ struct ipa_resource_data {
  * @imem_addr:		physical address of IPA region within IMEM
  * @imem_size:		size in bytes of IPA IMEM region
  * @smem_id:		item identifier for IPA region within SMEM memory
- * @imem_size:		size in bytes of the IPA SMEM region
+ * @smem_size:		size in bytes of the IPA SMEM region
  */
 struct ipa_mem_data {
 	u32 local_count;
@@ -306,14 +308,14 @@ struct ipa_clock_data {
  * @endpoint_count:	number of entries in the endpoint_data array
  * @endpoint_data:	IPA endpoint/GSI channel data
  * @resource_data:	IPA resource configuration data
- * @mem_count:		number of entries in the mem_data array
- * @mem_data:		IPA-local shared memory region data
+ * @mem_data:		IPA memory region data
+ * @clock_data:		IPA clock and interconnect data
  */
 struct ipa_data {
 	enum ipa_version version;
-	u32 qsb_count;		/* # entries in qsb_data[] */
+	u32 qsb_count;		/* number of entries in qsb_data[] */
 	const struct ipa_qsb_data *qsb_data;
-	u32 endpoint_count;	/* # entries in endpoint_data[] */
+	u32 endpoint_count;	/* number of entries in endpoint_data[] */
 	const struct ipa_gsi_endpoint_data *endpoint_data;
 	const struct ipa_resource_data *resource_data;
 	const struct ipa_mem_data *mem_data;

drivers/net/ipa/ipa_endpoint.c

@@ -884,18 +884,17 @@ static void ipa_endpoint_init_rsrc_grp(struct ipa_endpoint *endpoint)
 static void ipa_endpoint_init_seq(struct ipa_endpoint *endpoint)
 {
 	u32 offset = IPA_REG_ENDP_INIT_SEQ_N_OFFSET(endpoint->endpoint_id);
-	u32 seq_type = endpoint->seq_type;
 	u32 val = 0;
 
 	if (!endpoint->toward_ipa)
 		return;		/* Register not valid for RX endpoints */
 
-	/* Sequencer type is made up of four nibbles */
-	val |= u32_encode_bits(seq_type & 0xf, HPS_SEQ_TYPE_FMASK);
-	val |= u32_encode_bits((seq_type >> 4) & 0xf, DPS_SEQ_TYPE_FMASK);
-	/* The second two apply to replicated packets */
-	val |= u32_encode_bits((seq_type >> 8) & 0xf, HPS_REP_SEQ_TYPE_FMASK);
-	val |= u32_encode_bits((seq_type >> 12) & 0xf, DPS_REP_SEQ_TYPE_FMASK);
+	/* Low-order byte configures primary packet processing */
+	val |= u32_encode_bits(endpoint->data->tx.seq_type, SEQ_TYPE_FMASK);
+
+	/* Second byte configures replicated packet processing */
+	val |= u32_encode_bits(endpoint->data->tx.seq_rep_type,
+			       SEQ_REP_TYPE_FMASK);
 
 	iowrite32(val, endpoint->ipa->reg_virt + offset);
 }
@@ -1766,7 +1765,6 @@ static void ipa_endpoint_init_one(struct ipa *ipa, enum ipa_endpoint_name name,
 
 	endpoint->ipa = ipa;
 	endpoint->ee_id = data->ee_id;
-	endpoint->seq_type = data->endpoint.seq_type;
 	endpoint->channel_id = data->channel_id;
 	endpoint->endpoint_id = data->endpoint_id;
 	endpoint->toward_ipa = data->toward_ipa;

drivers/net/ipa/ipa_endpoint.h

@@ -46,7 +46,6 @@ enum ipa_endpoint_name {
  */
 struct ipa_endpoint {
 	struct ipa *ipa;
-	enum ipa_seq_type seq_type;
 	enum gsi_ee_id ee_id;
 	u32 channel_id;
 	u32 endpoint_id;

drivers/net/ipa/ipa_main.c

@@ -249,52 +249,40 @@ static void ipa_hardware_config_comp(struct ipa *ipa)
 	iowrite32(val, ipa->reg_virt + IPA_REG_COMP_CFG_OFFSET);
 }
 
-/* Configure DDR and PCIe max read/write QSB values */
-static void ipa_hardware_config_qsb(struct ipa *ipa)
+/* Configure DDR and (possibly) PCIe max read/write QSB values */
+static void
+ipa_hardware_config_qsb(struct ipa *ipa, const struct ipa_data *data)
 {
-	enum ipa_version version = ipa->version;
-	u32 max0;
-	u32 max1;
+	const struct ipa_qsb_data *data0;
+	const struct ipa_qsb_data *data1;
 	u32 val;
 
-	/* QMB_0 represents DDR; QMB_1 represents PCIe */
-	val = u32_encode_bits(8, GEN_QMB_0_MAX_WRITES_FMASK);
-	switch (version) {
-	case IPA_VERSION_4_2:
-		max1 = 0;		/* PCIe not present */
-		break;
-	case IPA_VERSION_4_5:
-		max1 = 8;
-		break;
-	default:
-		max1 = 4;
-		break;
-	}
-	val |= u32_encode_bits(max1, GEN_QMB_1_MAX_WRITES_FMASK);
+	/* assert(data->qsb_count > 0); */
+	/* assert(data->qsb_count < 3); */
+
+	/* QMB 0 represents DDR; QMB 1 (if present) represents PCIe */
+	data0 = &data->qsb_data[IPA_QSB_MASTER_DDR];
+	if (data->qsb_count > 1)
+		data1 = &data->qsb_data[IPA_QSB_MASTER_PCIE];
+
+	/* Max outstanding write accesses for QSB masters */
+	val = u32_encode_bits(data0->max_writes, GEN_QMB_0_MAX_WRITES_FMASK);
+	if (data->qsb_count > 1)
+		val |= u32_encode_bits(data1->max_writes,
+				       GEN_QMB_1_MAX_WRITES_FMASK);
 	iowrite32(val, ipa->reg_virt + IPA_REG_QSB_MAX_WRITES_OFFSET);
 
-	max1 = 12;
-	switch (version) {
-	case IPA_VERSION_3_5_1:
-		max0 = 8;
-		break;
-	case IPA_VERSION_4_0:
-	case IPA_VERSION_4_1:
-		max0 = 12;
-		break;
-	case IPA_VERSION_4_2:
-		max0 = 12;
-		max1 = 0;		/* PCIe not present */
-		break;
-	case IPA_VERSION_4_5:
-		max0 = 0;		/* No limit (hardware maximum) */
-		break;
-	}
-	val = u32_encode_bits(max0, GEN_QMB_0_MAX_READS_FMASK);
-	val |= u32_encode_bits(max1, GEN_QMB_1_MAX_READS_FMASK);
-	if (version != IPA_VERSION_3_5_1) {
-		/* GEN_QMB_0_MAX_READS_BEATS is 0 */
-		/* GEN_QMB_1_MAX_READS_BEATS is 0 */
+	/* Max outstanding read accesses for QSB masters */
+	val = u32_encode_bits(data0->max_reads, GEN_QMB_0_MAX_READS_FMASK);
+	if (ipa->version >= IPA_VERSION_4_0)
+		val |= u32_encode_bits(data0->max_reads_beats,
+				       GEN_QMB_0_MAX_READS_BEATS_FMASK);
+	if (data->qsb_count > 1) {
+		val |= u32_encode_bits(data1->max_reads,
+				       GEN_QMB_1_MAX_READS_FMASK);
+		if (ipa->version >= IPA_VERSION_4_0)
+			val |= u32_encode_bits(data1->max_reads_beats,
+					       GEN_QMB_1_MAX_READS_BEATS_FMASK);
 	}
 	iowrite32(val, ipa->reg_virt + IPA_REG_QSB_MAX_READS_OFFSET);
 }
@@ -385,8 +373,9 @@ static void ipa_hardware_dcd_deconfig(struct ipa *ipa)
 /**
  * ipa_hardware_config() - Primitive hardware initialization
  * @ipa:	IPA pointer
+ * @data:	IPA configuration data
  */
-static void ipa_hardware_config(struct ipa *ipa)
+static void ipa_hardware_config(struct ipa *ipa, const struct ipa_data *data)
 {
 	enum ipa_version version = ipa->version;
 	u32 granularity;
@@ -414,7 +403,7 @@ static void ipa_hardware_config(struct ipa *ipa)
 	ipa_hardware_config_comp(ipa);
 
 	/* Configure system bus limits */
-	ipa_hardware_config_qsb(ipa);
+	ipa_hardware_config_qsb(ipa, data);
 
 	if (version < IPA_VERSION_4_5) {
 		/* Configure aggregation timer granularity */
@@ -610,7 +599,7 @@ static int ipa_config(struct ipa *ipa, const struct ipa_data *data)
 	 */
 	ipa_clock_get(ipa);
 
-	ipa_hardware_config(ipa);
+	ipa_hardware_config(ipa, data);
 
 	ret = ipa_endpoint_config(ipa);
 	if (ret)