Merge tag 'omap-for-v4.2/fixes-rc2-v2' of git://git.kernel.org/pub/sc…

…m/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps, all dts changes except for one:

- Fix up LCD panel name for overo boards

- Three fixes for pepper board for regulators, freqeuncy
  scaling and audio input. Note that there is still one
  issue being worked on for booting with multi_v7_defconfig

- Add missing #iommu-cells for omap4 and 5

- Add missing HAVE_ARM_SCU for am43xx

* tag 'omap-for-v4.2/fixes-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (210 commits)
  ARM: dts: Correct audio input route & set mic bias for am335x-pepper
  ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
  ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
  ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
  ARM: dts: Fix frequency scaling on Gumstix Pepper
  ARM: dts: configure regulators for Gumstix Pepper
  ARM: dts: omap3: overo: Update LCD panel names
  + Linux 4.2-rc2

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/power/swsusp.txt

@@ -410,8 +410,17 @@ Documentation/usb/persist.txt.
 
 Q: Can I suspend-to-disk using a swap partition under LVM?
 
-A: No. You can suspend successfully, but you'll not be able to
-resume. uswsusp should be able to work with LVM. See suspend.sf.net.
+A: Yes and No.  You can suspend successfully, but the kernel will not be able
+to resume on its own.  You need an initramfs that can recognize the resume
+situation, activate the logical volume containing the swap volume (but not
+touch any filesystems!), and eventually call
+
+echo -n "$major:$minor" > /sys/power/resume
+
+where $major and $minor are the respective major and minor device numbers of
+the swap volume.
+
+uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
 
 Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
 compiled with the similar configuration files. Anyway I found that

MAINTAINERS

@@ -2564,19 +2564,31 @@ F:	arch/powerpc/include/uapi/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
-CEPH DISTRIBUTED FILE SYSTEM CLIENT
+CEPH COMMON CODE (LIBCEPH)
+M:	Ilya Dryomov <idryomov@gmail.com>
 M:	"Yan, Zheng" <zyan@redhat.com>
 M:	Sage Weil <sage@redhat.com>
 L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
 S:	Supported
-F:	Documentation/filesystems/ceph.txt
-F:	fs/ceph/
 F:	net/ceph/
 F:	include/linux/ceph/
 F:	include/linux/crush/
 
+CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH)
+M:	"Yan, Zheng" <zyan@redhat.com>
+M:	Sage Weil <sage@redhat.com>
+M:	Ilya Dryomov <idryomov@gmail.com>
+L:	ceph-devel@vger.kernel.org
+W:	http://ceph.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
+S:	Supported
+F:	Documentation/filesystems/ceph.txt
+F:	fs/ceph/
+
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 L:	linux-usb@vger.kernel.org
 S:	Orphan
@@ -6149,6 +6161,7 @@ L:	linux-nvdimm@lists.01.org
 Q:	https://patchwork.kernel.org/project/linux-nvdimm/list/
 S:	Supported
 F:	drivers/nvdimm/pmem.c
+F:	include/linux/pmem.h
 
 LINUX FOR IBM pSERIES (RS/6000)
 M:	Paul Mackerras <paulus@au.ibm.com>
@@ -6163,7 +6176,7 @@ M:	Michael Ellerman <mpe@ellerman.id.au>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
 Q:	http://patchwork.ozlabs.org/project/linuxppc-dev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
 S:	Supported
 F:	Documentation/powerpc/
 F:	arch/powerpc/
@@ -8368,10 +8381,12 @@ RADOS BLOCK DEVICE (RBD)
 M:	Ilya Dryomov <idryomov@gmail.com>
 M:	Sage Weil <sage@redhat.com>
 M:	Alex Elder <elder@kernel.org>
-M:	ceph-devel@vger.kernel.org
+L:	ceph-devel@vger.kernel.org
 W:	http://ceph.com/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T:	git git://github.com/ceph/ceph-client.git
 S:	Supported
+F:	Documentation/ABI/testing/sysfs-bus-rbd
 F:	drivers/block/rbd.c
 F:	drivers/block/rbd_types.h
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -1693,6 +1693,12 @@ config HIGHMEM
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem"
 	depends on HIGHMEM
+	help
+	  The VM uses one page of physical memory for each page table.
+	  For systems with a lot of processes, this can use a lot of
+	  precious low memory, eventually leading to low memory being
+	  consumed by page tables.  Setting this option will allow
+	  user-space 2nd level page tables to reside in high memory.
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"

arch/arm/Kconfig.debug

@@ -1635,7 +1635,7 @@ config PID_IN_CONTEXTIDR
 
 config DEBUG_SET_MODULE_RONX
 	bool "Set loadable kernel module data as NX and text as RO"
-	depends on MODULES
+	depends on MODULES && MMU
 	---help---
 	  This option helps catch unintended modifications to loadable
 	  kernel module's text and read-only data. It also prevents execution

arch/arm/boot/dts/am335x-pepper.dts

@@ -74,6 +74,7 @@
 	audio_codec: tlv320aic3106@1b {
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
+		ai3x-micbias-vg = <0x2>;
 	};
 
 	accel: lis331dlh@1d {
@@ -153,7 +154,7 @@
 	ti,audio-routing =
 		"Headphone Jack",	"HPLOUT",
 		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
+		"MIC3L",		"Mic3L Switch";
 };
 
 &mcasp0 {
@@ -438,41 +439,50 @@
 	regulators {
 		dcdc1_reg: regulator@0 {
 			/* VDD_1V8 system supply */
+			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc3_reg: regulator@2 {
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
+			regulator-max-microvolt = <1325000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1_reg: regulator@3 {
 			/* VRTC 1.8V always-on supply */
+			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
 			/* 3.3V rail */
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
 			/* VDD_3V3A 3.3V rail */
+			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 		};
 
 		ldo4_reg: regulator@6 {
 			/* VDD_3V3B 3.3V rail */
+			regulator-name = "vdd_3v3b";
+			regulator-always-on;
 		};
 	};
 };

arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi

@@ -120,7 +120,7 @@
 
 	lcd0: display@0 {
 		compatible = "lgphilips,lb035q02";
-		label = "lcd";
+		label = "lcd35";
 
 		reg = <1>;					/* CS1 */
 		spi-max-frequency = <10000000>;

arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi

@@ -98,7 +98,7 @@
 
 	lcd0: display@0 {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd";
+		label = "lcd43";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&lte430_pins>;

arch/arm/boot/dts/omap4.dtsi

@@ -551,13 +551,15 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
 			compatible = "ti,omap4-iommu";
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 

arch/arm/boot/dts/omap5.dtsi

@@ -612,13 +612,15 @@
 			reg = <0x4a066000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_dsp";
+			#iommu-cells = <0>;
 		};
 
 		mmu_ipu: mmu@55082000 {
 			compatible = "ti,omap4-iommu";
 			reg = <0x55082000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmu_ipu";
+			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
 

arch/arm/include/asm/io.h

@@ -140,16 +140,11 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
  * The _caller variety takes a __builtin_return_address(0) value for
  * /proc/vmalloc to use - and should only be used in non-inline functions.
  */
-extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
-	size_t, unsigned int, void *);
 extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int,
 	void *);
-
 extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem *__arm_ioremap(phys_addr_t, size_t, unsigned int);
 extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
 extern void __iounmap(volatile void __iomem *addr);
-extern void __arm_iounmap(volatile void __iomem *addr);
 
 extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
 	unsigned int, void *);
@@ -321,21 +316,24 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 static inline void memset_io(volatile void __iomem *dst, unsigned c,
 	size_t count)
 {
-	memset((void __force *)dst, c, count);
+	extern void mmioset(void *, unsigned int, size_t);
+	mmioset((void __force *)dst, c, count);
 }
 #define memset_io(dst,c,count) memset_io(dst,c,count)
 
 static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
 	size_t count)
 {
-	memcpy(to, (const void __force *)from, count);
+	extern void mmiocpy(void *, const void *, size_t);
+	mmiocpy(to, (const void __force *)from, count);
 }
 #define memcpy_fromio(to,from,count) memcpy_fromio(to,from,count)
 
 static inline void memcpy_toio(volatile void __iomem *to, const void *from,
 	size_t count)
 {
-	memcpy((void __force *)to, from, count);
+	extern void mmiocpy(void *, const void *, size_t);
+	mmiocpy((void __force *)to, from, count);
 }
 #define memcpy_toio(to,from,count) memcpy_toio(to,from,count)
 
@@ -348,18 +346,61 @@ static inline void memcpy_toio(volatile void __iomem *to, const void *from,
 #endif	/* readl */
 
 /*
- * ioremap and friends.
+ * ioremap() and friends.
+ *
+ * ioremap() takes a resource address, and size.  Due to the ARM memory
+ * types, it is important to use the correct ioremap() function as each
+ * mapping has specific properties.
+ *
+ * Function		Memory type	Cacheability	Cache hint
+ * ioremap()		Device		n/a		n/a
+ * ioremap_nocache()	Device		n/a		n/a
+ * ioremap_cache()	Normal		Writeback	Read allocate
+ * ioremap_wc()		Normal		Non-cacheable	n/a
+ * ioremap_wt()		Normal		Non-cacheable	n/a
+ *
+ * All device mappings have the following properties:
+ * - no access speculation
+ * - no repetition (eg, on return from an exception)
+ * - number, order and size of accesses are maintained
+ * - unaligned accesses are "unpredictable"
+ * - writes may be delayed before they hit the endpoint device
  *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/io-mapping.txt.
+ * ioremap_nocache() is the same as ioremap() as there are too many device
+ * drivers using this for device registers, and documentation which tells
+ * people to use it for such for this to be any different.  This is not a
+ * safe fallback for memory-like mappings, or memory regions where the
+ * compiler may generate unaligned accesses - eg, via inlining its own
+ * memcpy.
  *
+ * All normal memory mappings have the following properties:
+ * - reads can be repeated with no side effects
+ * - repeated reads return the last value written
+ * - reads can fetch additional locations without side effects
+ * - writes can be repeated (in certain cases) with no side effects
+ * - writes can be merged before accessing the target
+ * - unaligned accesses can be supported
+ * - ordering is not guaranteed without explicit dependencies or barrier
+ *   instructions
+ * - writes may be delayed before they hit the endpoint memory
+ *
+ * The cache hint is only a performance hint: CPUs may alias these hints.
+ * Eg, a CPU not implementing read allocate but implementing write allocate
+ * will provide a write allocate mapping instead.
  */
-#define ioremap(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_cache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE_CACHED)
-#define ioremap_wc(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE_WC)
-#define ioremap_wt(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define iounmap				__arm_iounmap
+void __iomem *ioremap(resource_size_t res_cookie, size_t size);
+#define ioremap ioremap
+#define ioremap_nocache ioremap
+
+void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size);
+#define ioremap_cache ioremap_cache
+
+void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
+#define ioremap_wc ioremap_wc
+#define ioremap_wt ioremap_wc
+
+void iounmap(volatile void __iomem *iomem_cookie);
+#define iounmap iounmap
 
 /*
  * io{read,write}{16,32}be() macros

arch/arm/include/asm/memory.h

@@ -275,7 +275,7 @@ static inline void *phys_to_virt(phys_addr_t x)
  */
 #define __pa(x)			__virt_to_phys((unsigned long)(x))
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((phys_addr_t)(pfn) << PAGE_SHIFT)
 
 extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
 

arch/arm/include/asm/pgtable-2level.h

@@ -129,7 +129,36 @@
 
 /*
  * These are the memory types, defined to be compatible with
- * pre-ARMv6 CPUs cacheable and bufferable bits:   XXCB
+ * pre-ARMv6 CPUs cacheable and bufferable bits: n/a,n/a,C,B
+ * ARMv6+ without TEX remapping, they are a table index.
+ * ARMv6+ with TEX remapping, they correspond to n/a,TEX(0),C,B
+ *
+ * MT type		Pre-ARMv6	ARMv6+ type / cacheable status
+ * UNCACHED		Uncached	Strongly ordered
+ * BUFFERABLE		Bufferable	Normal memory / non-cacheable
+ * WRITETHROUGH		Writethrough	Normal memory / write through
+ * WRITEBACK		Writeback	Normal memory / write back, read alloc
+ * MINICACHE		Minicache	N/A
+ * WRITEALLOC		Writeback	Normal memory / write back, write alloc
+ * DEV_SHARED		Uncached	Device memory (shared)
+ * DEV_NONSHARED	Uncached	Device memory (non-shared)
+ * DEV_WC		Bufferable	Normal memory / non-cacheable
+ * DEV_CACHED		Writeback	Normal memory / write back, read alloc
+ * VECTORS		Variable	Normal memory / variable
+ *
+ * All normal memory mappings have the following properties:
+ * - reads can be repeated with no side effects
+ * - repeated reads return the last value written
+ * - reads can fetch additional locations without side effects
+ * - writes can be repeated (in certain cases) with no side effects
+ * - writes can be merged before accessing the target
+ * - unaligned accesses can be supported
+ *
+ * All device mappings have the following properties:
+ * - no access speculation
+ * - no repetition (eg, on return from an exception)
+ * - number, order and size of accesses are maintained
+ * - unaligned accesses are "unpredictable"
  */
 #define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0x00) << 2)	/* 0000 */
 #define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 0x01) << 2)	/* 0001 */