Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:
 "Various fixes, all over:

   1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.

   2) Always store the rx queue mapping in veth, from Maciej
      Fijalkowski.

   3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.

   4) Fix memory leak in octeontx2-af from Colin Ian King.

   5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
      Yonghong Song.

   6) Fix tx ptp stats in mlx5, from Aya Levin.

   7) Check correct ip version in tun decap, fropm Roi Dayan.

   8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.

   9) Work item memork leak in mlx5, from Shay Drory.

  10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.

  11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.

  12) Fix data race in pxa168_eth, from Pavel Andrianov.

  13) Range validate stab in red_check_params(), from Eric Dumazet.

  14) Inherit vlan filtering setting properly in b53 driver, from
      Florian Fainelli.

  15) Fix rtnl locking in igc driver, from Sasha Neftin.

  16) Pause handling fixes in igc driver, from Muhammad Husaini
      Zulkifli.

  17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.

  18) Use after free in qlcnic, from Lv Yunlong.

  19) fix crash in fritzpci mISDN, from Tong Zhang.

  20) Premature rx buffer reuse in igb, from Li RongQing.

  21) Missing termination of ip[a driver message handler arrays, from
      Alex Elder.

  22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
      driver, from Xie He.

  23) Use after free in c_can_pci_remove(), from Tong Zhang.

  24) Uninitialized variable use in nl80211, from Jarod Wilson.

  25) Off by one size calc in bpf verifier, from Piotr Krysiuk.

  26) Use delayed work instead of deferrable for flowtable GC, from
      Yinjun Zhang.

  27) Fix infinite loop in NPC unmap of octeontx2 driver, from
      Hariprasad Kelam.

  28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
      of fifo sizes, from Corentin Labbe.

  29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.

  30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.

  31) Fix psample UAPI breakage, from Ido Schimmel"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
  psample: Fix user API breakage
  math: Export mul_u64_u64_div_u64
  ch_ktls: fix enum-conversion warning
  octeontx2-af: Fix memory leak of object buf
  ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
  net: bridge: don't notify switchdev for local FDB addresses
  net/sched: act_ct: clear post_ct if doing ct_clear
  net: dsa: don't assign an error value to tag_ops
  isdn: capi: fix mismatched prototypes
  net/mlx5: SF, do not use ecpu bit for vhca state processing
  net/mlx5e: Fix division by 0 in mlx5e_select_queue
  net/mlx5e: Fix error path for ethtool set-priv-flag
  net/mlx5e: Offload tuple rewrite for non-CT flows
  net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
  net/mlx5: Add back multicast stats for uplink representor
  net: ipconfig: ic_dev can be NULL in ic_close_devs
  MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
  docs: networking: Fix a typo
  r8169: fix DMA being used after buffer free if WoL is enabled
  net: ipa: fix init header command validation
  ...

Documentation/networking/device_drivers/ethernet/amazon/ena.rst

@@ -267,7 +267,7 @@ DATA PATH
 Tx
 --
 
-end_start_xmit() is called by the stack. This function does the following:
+ena_start_xmit() is called by the stack. This function does the following:
 
 - Maps data buffers (skb->data and frags).
 - Populates ena_buf for the push buffer (if the driver and device are

Documentation/networking/devlink/devlink-dpipe.rst

@@ -52,7 +52,7 @@ purposes as a standard complementary tool. The system's view from
 ``devlink-dpipe`` should change according to the changes done by the
 standard configuration tools.
 
-For example, it’s quiet common to  implement Access Control Lists (ACL)
+For example, it’s quite common to  implement Access Control Lists (ACL)
 using Ternary Content Addressable Memory (TCAM). The TCAM memory can be
 divided into TCAM regions. Complex TC filters can have multiple rules with
 different priorities and different lookup keys. On the other hand hardware

Documentation/networking/devlink/devlink-port.rst

@@ -151,7 +151,7 @@ representor netdevice.
 -------------
 A subfunction devlink port is created but it is not active yet. That means the
 entities are created on devlink side, the e-switch port representor is created,
-but the subfunction device itself it not created. A user might use e-switch port
+but the subfunction device itself is not created. A user might use e-switch port
 representor to do settings, putting it into bridge, adding TC rules, etc. A user
 might as well configure the hardware address (such as MAC address) of the
 subfunction while subfunction is inactive.
@@ -173,7 +173,7 @@ Terms and Definitions
    * - Term
      - Definitions
    * - ``PCI device``
-     - A physical PCI device having one or more PCI bus consists of one or
+     - A physical PCI device having one or more PCI buses consists of one or
        more PCI controllers.
    * - ``PCI controller``
      -  A controller consists of potentially multiple physical functions,

Documentation/networking/xfrm_device.rst

@@ -50,7 +50,7 @@ Callbacks to implement
 
 The NIC driver offering ipsec offload will need to implement these
 callbacks to make the offload available to the network stack's
-XFRM subsytem.  Additionally, the feature bits NETIF_F_HW_ESP and
+XFRM subsystem.  Additionally, the feature bits NETIF_F_HW_ESP and
 NETIF_F_HW_ESP_TX_CSUM will signal the availability of the offload.
 
 

MAINTAINERS

@@ -8520,6 +8520,7 @@ IBM Power SRIOV Virtual NIC Device Driver
 M:	Dany Madden <drt@linux.ibm.com>
 M:	Lijun Pan <ljp@linux.ibm.com>
 M:	Sukadev Bhattiprolu <sukadev@linux.ibm.com>
+R:	Thomas Falcon <tlfalcon@linux.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/ibm/ibmvnic.*
@@ -12537,7 +12538,7 @@ NETWORKING [MPTCP]
 M:	Mat Martineau <mathew.j.martineau@linux.intel.com>
 M:	Matthieu Baerts <matthieu.baerts@tessares.net>
 L:	netdev@vger.kernel.org
-L:	mptcp@lists.01.org
+L:	mptcp@lists.linux.dev
 S:	Maintained
 W:	https://github.com/multipath-tcp/mptcp_net-next/wiki
 B:	https://github.com/multipath-tcp/mptcp_net-next/issues
@@ -14708,15 +14709,11 @@ F:	drivers/net/ethernet/qlogic/qlcnic/
 QLOGIC QLGE 10Gb ETHERNET DRIVER
 M:	Manish Chopra <manishc@marvell.com>
 M:	GR-Linux-NIC-Dev@marvell.com
-L:	netdev@vger.kernel.org
-S:	Supported
-F:	drivers/staging/qlge/
-
-QLOGIC QLGE 10Gb ETHERNET DRIVER
 M:	Coiby Xu <coiby.xu@gmail.com>
 L:	netdev@vger.kernel.org
-S:	Maintained
+S:	Supported
 F:	Documentation/networking/device_drivers/qlogic/qlge.rst
+F:	drivers/staging/qlge/
 
 QM1D1B0004 MEDIA DRIVER
 M:	Akihiro Tsukada <tskd08@gmail.com>
@@ -16886,8 +16883,10 @@ F:	tools/spi/
 
 SPIDERNET NETWORK DRIVER for CELL
 M:	Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
+M:	Geoff Levand <geoff@infradead.org>
 L:	netdev@vger.kernel.org
-S:	Supported
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Maintained
 F:	Documentation/networking/device_drivers/ethernet/toshiba/spider_net.rst
 F:	drivers/net/ethernet/toshiba/spider_net*
 

arch/x86/net/bpf_jit_comp.c

@@ -1936,7 +1936,7 @@ static int invoke_bpf_mod_ret(const struct btf_func_model *m, u8 **pprog,
  * add rsp, 8                      // skip eth_type_trans's frame
  * ret                             // return to its caller
  */
-int arch_prepare_bpf_trampoline(void *image, void *image_end,
+int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *image_end,
 				const struct btf_func_model *m, u32 flags,
 				struct bpf_tramp_progs *tprogs,
 				void *orig_call)
@@ -1975,6 +1975,15 @@ int arch_prepare_bpf_trampoline(void *image, void *image_end,
 
 	save_regs(m, &prog, nr_args, stack_size);
 
+	if (flags & BPF_TRAMP_F_CALL_ORIG) {
+		/* arg1: mov rdi, im */
+		emit_mov_imm64(&prog, BPF_REG_1, (long) im >> 32, (u32) (long) im);
+		if (emit_call(&prog, __bpf_tramp_enter, prog)) {
+			ret = -EINVAL;
+			goto cleanup;
+		}
+	}
+
 	if (fentry->nr_progs)
 		if (invoke_bpf(m, &prog, fentry, stack_size))
 			return -EINVAL;
@@ -1993,8 +2002,7 @@ int arch_prepare_bpf_trampoline(void *image, void *image_end,
 	}
 
 	if (flags & BPF_TRAMP_F_CALL_ORIG) {
-		if (fentry->nr_progs || fmod_ret->nr_progs)
-			restore_regs(m, &prog, nr_args, stack_size);
+		restore_regs(m, &prog, nr_args, stack_size);
 
 		/* call original function */
 		if (emit_call(&prog, orig_call, prog)) {
@@ -2003,6 +2011,9 @@ int arch_prepare_bpf_trampoline(void *image, void *image_end,
 		}
 		/* remember return value in a stack for bpf prog to access */
 		emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -8);
+		im->ip_after_call = prog;
+		memcpy(prog, ideal_nops[NOP_ATOMIC5], X86_PATCH_SIZE);
+		prog += X86_PATCH_SIZE;
 	}
 
 	if (fmod_ret->nr_progs) {
@@ -2033,9 +2044,17 @@ int arch_prepare_bpf_trampoline(void *image, void *image_end,
 	 * the return value is only updated on the stack and still needs to be
 	 * restored to R0.
 	 */
-	if (flags & BPF_TRAMP_F_CALL_ORIG)
+	if (flags & BPF_TRAMP_F_CALL_ORIG) {
+		im->ip_epilogue = prog;
+		/* arg1: mov rdi, im */
+		emit_mov_imm64(&prog, BPF_REG_1, (long) im >> 32, (u32) (long) im);
+		if (emit_call(&prog, __bpf_tramp_exit, prog)) {
+			ret = -EINVAL;
+			goto cleanup;
+		}
 		/* restore original return value back into RAX */
 		emit_ldx(&prog, BPF_DW, BPF_REG_0, BPF_REG_FP, -8);
+	}
 
 	EMIT1(0x5B); /* pop rbx */
 	EMIT1(0xC9); /* leave */
@@ -2225,7 +2244,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		padding = true;
 		goto skip_init_addrs;
 	}
-	addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
+	addrs = kvmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
 	if (!addrs) {
 		prog = orig_prog;
 		goto out_addrs;
@@ -2317,7 +2336,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		if (image)
 			bpf_prog_fill_jited_linfo(prog, addrs + 1);
 out_addrs:
-		kfree(addrs);
+		kvfree(addrs);
 		kfree(jit_data);
 		prog->aux->jit_data = NULL;
 	}

drivers/infiniband/hw/mlx5/qp.c

@@ -1078,7 +1078,7 @@ static int _create_kernel_qp(struct mlx5_ib_dev *dev,
 
 	qpc = MLX5_ADDR_OF(create_qp_in, *in, qpc);
 	MLX5_SET(qpc, qpc, uar_page, uar_index);
-	MLX5_SET(qpc, qpc, ts_format, MLX5_QPC_TIMESTAMP_FORMAT_DEFAULT);
+	MLX5_SET(qpc, qpc, ts_format, mlx5_get_qp_default_ts(dev->mdev));
 	MLX5_SET(qpc, qpc, log_page_size, qp->buf.page_shift - MLX5_ADAPTER_PAGE_SHIFT);
 
 	/* Set "fast registration enabled" for all kernel QPs */
@@ -1188,7 +1188,8 @@ static int get_rq_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq)
 		}
 		return MLX5_RQC_TIMESTAMP_FORMAT_FREE_RUNNING;
 	}
-	return MLX5_RQC_TIMESTAMP_FORMAT_DEFAULT;
+	return fr_supported ? MLX5_RQC_TIMESTAMP_FORMAT_FREE_RUNNING :
+			      MLX5_RQC_TIMESTAMP_FORMAT_DEFAULT;
 }
 
 static int get_sq_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq)
@@ -1206,7 +1207,8 @@ static int get_sq_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq)
 		}
 		return MLX5_SQC_TIMESTAMP_FORMAT_FREE_RUNNING;
 	}
-	return MLX5_SQC_TIMESTAMP_FORMAT_DEFAULT;
+	return fr_supported ? MLX5_SQC_TIMESTAMP_FORMAT_FREE_RUNNING :
+			      MLX5_SQC_TIMESTAMP_FORMAT_DEFAULT;
 }
 
 static int get_qp_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq,
@@ -1217,7 +1219,8 @@ static int get_qp_ts_format(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *send_cq,
 			MLX5_QP_TIMESTAMP_FORMAT_CAP_FREE_RUNNING ||
 		MLX5_CAP_ROCE(dev->mdev, qp_ts_format) ==
 			MLX5_QP_TIMESTAMP_FORMAT_CAP_FREE_RUNNING_AND_REAL_TIME;
-	int ts_format = MLX5_QPC_TIMESTAMP_FORMAT_DEFAULT;
+	int ts_format = fr_supported ? MLX5_QPC_TIMESTAMP_FORMAT_FREE_RUNNING :
+				       MLX5_QPC_TIMESTAMP_FORMAT_DEFAULT;
 
 	if (recv_cq &&
 	    recv_cq->create_flags & IB_UVERBS_CQ_FLAGS_TIMESTAMP_COMPLETION)
@@ -1930,6 +1933,7 @@ static int create_xrc_tgt_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 	if (qp->flags & IB_QP_CREATE_MANAGED_RECV)
 		MLX5_SET(qpc, qpc, cd_slave_receive, 1);
 
+	MLX5_SET(qpc, qpc, ts_format, mlx5_get_qp_default_ts(dev->mdev));
 	MLX5_SET(qpc, qpc, rq_type, MLX5_SRQ_RQ);
 	MLX5_SET(qpc, qpc, no_sq, 1);
 	MLX5_SET(qpc, qpc, cqn_rcv, to_mcq(devr->c0)->mcq.cqn);
@@ -4873,6 +4877,7 @@ static int  create_rq(struct mlx5_ib_rwq *rwq, struct ib_pd *pd,
 	struct mlx5_ib_dev *dev;
 	int has_net_offloads;
 	__be64 *rq_pas0;
+	int ts_format;
 	void *in;
 	void *rqc;
 	void *wq;
@@ -4881,6 +4886,10 @@ static int  create_rq(struct mlx5_ib_rwq *rwq, struct ib_pd *pd,
 
 	dev = to_mdev(pd->device);
 
+	ts_format = get_rq_ts_format(dev, to_mcq(init_attr->cq));
+	if (ts_format < 0)
+		return ts_format;
+
 	inlen = MLX5_ST_SZ_BYTES(create_rq_in) + sizeof(u64) * rwq->rq_num_pas;
 	in = kvzalloc(inlen, GFP_KERNEL);
 	if (!in)
@@ -4890,6 +4899,7 @@ static int  create_rq(struct mlx5_ib_rwq *rwq, struct ib_pd *pd,
 	rqc = MLX5_ADDR_OF(create_rq_in, in, ctx);
 	MLX5_SET(rqc,  rqc, mem_rq_type,
 		 MLX5_RQC_MEM_RQ_TYPE_MEMORY_RQ_INLINE);
+	MLX5_SET(rqc, rqc, ts_format, ts_format);
 	MLX5_SET(rqc, rqc, user_index, rwq->user_index);
 	MLX5_SET(rqc,  rqc, cqn, to_mcq(init_attr->cq)->mcq.cqn);
 	MLX5_SET(rqc,  rqc, state, MLX5_RQC_STATE_RST);

drivers/isdn/capi/kcapi.c

@@ -721,7 +721,7 @@ u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb)
  * Return value: CAPI result code
  */
 
-u16 capi20_get_manufacturer(u32 contr, u8 *buf)
+u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN])
 {
 	struct capi_ctr *ctr;
 	u16 ret;
@@ -787,7 +787,7 @@ u16 capi20_get_version(u32 contr, struct capi_version *verp)
  * Return value: CAPI result code
  */
 
-u16 capi20_get_serial(u32 contr, u8 *serial)
+u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN])
 {
 	struct capi_ctr *ctr;
 	u16 ret;

drivers/isdn/hardware/mISDN/mISDNipac.c

@@ -694,7 +694,7 @@ isac_release(struct isac_hw *isac)
 {
 	if (isac->type & IPAC_TYPE_ISACX)
 		WriteISAC(isac, ISACX_MASK, 0xff);
-	else
+	else if (isac->type != 0)
 		WriteISAC(isac, ISAC_MASK, 0xff);
 	if (isac->dch.timer.function != NULL) {
 		del_timer(&isac->dch.timer);

drivers/net/arcnet/com20020-pci.c

@@ -127,6 +127,8 @@ static int com20020pci_probe(struct pci_dev *pdev,
 	int i, ioaddr, ret;
 	struct resource *r;
 
+	ret = 0;
+
 	if (pci_enable_device(pdev))
 		return -EIO;
 
@@ -139,6 +141,8 @@ static int com20020pci_probe(struct pci_dev *pdev,
 	priv->ci = ci;
 	mm = &ci->misc_map;
 
+	pci_set_drvdata(pdev, priv);
+
 	INIT_LIST_HEAD(&priv->list_dev);
 
 	if (mm->size) {
@@ -161,7 +165,7 @@ static int com20020pci_probe(struct pci_dev *pdev,
 		dev = alloc_arcdev(device);
 		if (!dev) {
 			ret = -ENOMEM;
-			goto out_port;
+			break;
 		}
 		dev->dev_port = i;
 
@@ -178,7 +182,7 @@ static int com20020pci_probe(struct pci_dev *pdev,
 			pr_err("IO region %xh-%xh already allocated\n",
 			       ioaddr, ioaddr + cm->size - 1);
 			ret = -EBUSY;
-			goto out_port;
+			goto err_free_arcdev;
 		}
 
 		/* Dummy access after Reset
@@ -216,18 +220,18 @@ static int com20020pci_probe(struct pci_dev *pdev,
 		if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
 			pr_err("IO address %Xh is empty!\n", ioaddr);
 			ret = -EIO;
-			goto out_port;
+			goto err_free_arcdev;
 		}
 		if (com20020_check(dev)) {
 			ret = -EIO;
-			goto out_port;
+			goto err_free_arcdev;
 		}
 
 		card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
 				    GFP_KERNEL);
 		if (!card) {
 			ret = -ENOMEM;
-			goto out_port;
+			goto err_free_arcdev;
 		}
 
 		card->index = i;
@@ -253,29 +257,29 @@ static int com20020pci_probe(struct pci_dev *pdev,
 
 		ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
 		if (ret)
-			goto out_port;
+			goto err_free_arcdev;
 
 		ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
 		if (ret)
-			goto out_port;
+			goto err_free_arcdev;
 
 		dev_set_drvdata(&dev->dev, card);
 
 		ret = com20020_found(dev, IRQF_SHARED);
 		if (ret)
-			goto out_port;
+			goto err_free_arcdev;
 
 		devm_arcnet_led_init(dev, dev->dev_id, i);
 
 		list_add(&card->list, &priv->list_dev);
-	}
+		continue;
 
-	pci_set_drvdata(pdev, priv);
-
-	return 0;
-
-out_port:
-	com20020pci_remove(pdev);
+err_free_arcdev:
+		free_arcdev(dev);
+		break;
+	}
+	if (ret)
+		com20020pci_remove(pdev);
 	return ret;
 }
 

drivers/net/bonding/bond_main.c

@@ -3978,15 +3978,11 @@ static int bond_neigh_init(struct neighbour *n)
 
 	rcu_read_lock();
 	slave = bond_first_slave_rcu(bond);
-	if (!slave) {
-		ret = -EINVAL;
+	if (!slave)
 		goto out;
-	}
 	slave_ops = slave->dev->netdev_ops;
-	if (!slave_ops->ndo_neigh_setup) {
-		ret = -EINVAL;
+	if (!slave_ops->ndo_neigh_setup)
 		goto out;
-	}
 
 	/* TODO: find another way [1] to implement this.
 	 * Passing a zeroed structure is fragile,