Merge tag 'iio-fixes-for-3.12c' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/jic23/iio into char-misc-linus

Jonathan writes:

Third set of IIO fixes for the 3.12 cycle.

Two little ones this time:

1) A missing clk_unprepare in adf4350.
2) A missing free of the active_scan_mask when iio_disable_all_buffers is
called during an unexpected device removal.  This leak was introduced by
the fix
a87c82e iio: Stop sampling when the device is removed
and hence is a regression fix.

Documentation/block/00-INDEX

@@ -6,6 +6,8 @@ capability.txt
 	- Generic Block Device Capability (/sys/block/<device>/capability)
 cfq-iosched.txt
 	- CFQ IO scheduler tunables
+cmdline-partition.txt
+	- how to specify block device partitions on kernel command line
 data-integrity.txt
 	- Block data integrity
 deadline-iosched.txt

Documentation/block/cmdline-partition.txt

@@ -1,9 +1,9 @@
-Embedded device command line partition
+Embedded device command line partition parsing
 =====================================================================
 
-Read block device partition table from command line.
-The partition used for fixed block device (eMMC) embedded device.
-It is no MBR, save storage space. Bootloader can be easily accessed
+Support for reading the block device partition table from the command line.
+It is typically used for fixed block (eMMC) embedded devices.
+It has no MBR, so saves storage space. Bootloader can be easily accessed
 by absolute address of data on the block device.
 Users can easily change the partition.
 

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

@@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as
 described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
 optional bindings can be used.
 
+Required properties:
+- compatible:	"renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
+		"renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
+		"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
+		"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
+		"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
+		"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
+		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
+		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
+
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
-
-When used with Renesas SDHI hardware, the following compatibility strings
-configure various model-specific properties:
-
-"renesas,sh7372-sdhi":	(default) compatible with SH7372
-"renesas,r8a7740-sdhi":	compatible with R8A7740: certain MMC/SD commands have to
-			wait for the interface to become idle.

Documentation/devicetree/bindings/net/fsl-tsec-phy.txt

@@ -86,6 +86,7 @@ General Properties:
 
 Clock Properties:
 
+  - fsl,cksel        Timer reference clock source.
   - fsl,tclk-period  Timer reference clock period in nanoseconds.
   - fsl,tmr-prsc     Prescaler, divides the output clock.
   - fsl,tmr-add      Frequency compensation value.
@@ -97,7 +98,7 @@ Clock Properties:
   clock. You must choose these carefully for the clock to work right.
   Here is how to figure good values:
 
-  TimerOsc     = system clock               MHz
+  TimerOsc     = selected reference clock   MHz
   tclk_period  = desired clock period       nanoseconds
   NominalFreq  = 1000 / tclk_period         MHz
   FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
@@ -114,13 +115,28 @@ Clock Properties:
   Pulse Per Second (PPS) signal, since this will be offered to the PPS
   subsystem to synchronize the Linux clock.
 
+  Reference clock source is determined by the value, which is holded
+  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+  value, which will be directly written in those bits, that is why,
+  according to reference manual, the next clock sources can be used:
+
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  When this attribute is not used, eTSEC system clock will serve as
+  IEEE 1588 timer reference clock.
+
 Example:
 
 	ptp_clock@24E00 {
 		compatible = "fsl,etsec-ptp";
 		reg = <0x24E00 0xB0>;
 		interrupts = <12 0x8 13 0x8>;
 		interrupt-parent = < &ipic >;
+		fsl,cksel       = <1>;
 		fsl,tclk-period = <10>;
 		fsl,tmr-prsc    = <100>;
 		fsl,tmr-add     = <0x999999A4>;

Documentation/kernel-parameters.txt

@@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
+	blkdevparts=	Manual partition parsing of block device(s) for
+			embedded devices based on command line input.
+			See Documentation/block/cmdline-partition.txt
+
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
 			no delay (0).
@@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			pages. In the event, a node is too small to have both
 			kernelcore and Movable pages, kernelcore pages will
 			take priority and other nodes will have a larger number
-			of kernelcore pages.  The Movable zone is used for the
+			of Movable pages.  The Movable zone is used for the
 			allocation of pages that may be reclaimed or moved
 			by the page migration subsystem.  This means that
 			HugeTLB pages may not be allocated from this zone.

MAINTAINERS

@@ -824,15 +824,21 @@ S:	Maintained
 F:	arch/arm/mach-gemini/
 
 ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
-M:	Barry Song <baohua.song@csr.com>
+M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
 F:	arch/arm/mach-prima2/
+F:	drivers/clk/clk-prima2.c
+F:	drivers/clocksource/timer-prima2.c
+F:	drivers/clocksource/timer-marco.c
 F:	drivers/dma/sirf-dma.c
 F:	drivers/i2c/busses/i2c-sirf.c
+F:	drivers/input/misc/sirfsoc-onkey.c
+F:	drivers/irqchip/irq-sirfsoc.c
 F:	drivers/mmc/host/sdhci-sirf.c
 F:	drivers/pinctrl/sirf/
+F:	drivers/rtc/rtc-sirfsoc.c
 F:	drivers/spi/spi-sirf.c
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -4470,6 +4476,13 @@ L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/ioc3_serial.c
 
+IOMMU DRIVERS
+M:	Joerg Roedel <joro@8bytes.org>
+L:	iommu@lists.linux-foundation.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+S:	Maintained
+F:	drivers/iommu/
+
 IP MASQUERADING
 M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
@@ -7271,9 +7284,9 @@ F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
 
 SCORE ARCHITECTURE
-M:	Chen Liqin <liqin.chen@sunplusct.com>
+M:	Chen Liqin <liqin.linux@gmail.com>
 M:	Lennox Wu <lennox.wu@gmail.com>
-W:	http://www.sunplusct.com
+W:	http://www.sunplus.com
 S:	Supported
 F:	arch/score/
 
@@ -9378,6 +9391,7 @@ F:	arch/arm64/include/asm/xen/
 
 XEN NETWORK BACKEND DRIVER
 M:	Ian Campbell <ian.campbell@citrix.com>
+M:	Wei Liu <wei.liu2@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/arc/include/asm/spinlock.h

@@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
 	smp_mb();
 }
 

arch/arc/include/asm/uaccess.h

@@ -43,7 +43,7 @@
  * Because it essentially checks if buffer end is within limit and @len is
  * non-ngeative, which implies that buffer start will be within limit too.
  *
- * The reason for rewriting being, for majorit yof cases, @len is generally
+ * The reason for rewriting being, for majority of cases, @len is generally
  * compile time constant, causing first sub-expression to be compile time
  * subsumed.
  *
@@ -53,7 +53,7 @@
  *
  */
 #define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 (((addr)+(sz)) <= get_fs()))
+				 ((addr) <= (get_fs() - (sz))))
 #define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
 				 likely(__user_ok((addr), (sz))))
 

arch/arc/kernel/signal.c

@@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct rt_sigframe __user *sf;
 	unsigned int magic;
-	int err;
 	struct pt_regs *regs = current_pt_regs();
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
 		goto badframe;
 
-	err = restore_usr_regs(regs, sf);
-	err |= __get_user(magic, &sf->sigret_magic);
-	if (err)
+	if (__get_user(magic, &sf->sigret_magic))
 		goto badframe;
 
 	if (unlikely(is_do_ss_needed(magic)))
 		if (restore_altstack(&sf->uc.uc_stack))
 			goto badframe;
 
+	if (restore_usr_regs(regs, sf))
+		goto badframe;
+
 	/* Don't restart from sigreturn */
 	syscall_wont_restart(regs);
 
@@ -190,6 +190,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 	if (!sf)
 		return 1;
 
+	/*
+	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
+	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
+	 * during signal handler execution. This works for SA_SIGINFO as well
+	 * although the semantics are now overloaded (the same reg state can be
+	 * inspected by userland: but are they allowed to fiddle with it ?
+	 */
+	err |= stash_usr_regs(sf, regs, set);
+
 	/*
 	 * SA_SIGINFO requires 3 args to signal handler:
 	 *  #1: sig-no (common to any handler)
@@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 		magic = MAGIC_SIGALTSTK;
 	}
 
-	/*
-	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
-	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
-	 * during signal handler execution. This works for SA_SIGINFO as well
-	 * although the semantics are now overloaded (the same reg state can be
-	 * inspected by userland: but are they allowed to fiddle with it ?
-	 */
-	err |= stash_usr_regs(sf, regs, set);
 	err |= __put_user(magic, &sf->sigret_magic);
 	if (err)
 		return err;

arch/arc/kernel/time.c

@@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
 
-	clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5);
-
-	clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk);
 	clk->cpumask = cpumask_of(cpu);
-
-	clockevents_register_device(clk);
+	clockevents_config_and_register(clk, arc_get_core_freq(),
+					0, ARC_TIMER_MAX);
 
 	/*
 	 * setup the per-cpu timer IRQ handler - for all cpus

arch/arc/kernel/unaligned.c

@@ -245,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;
+
+		/* handle zero-overhead-loop */
+		if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
+			regs->ret = regs->lp_start;
+			regs->lp_count--;
+		}
 	}
 
 	return 0;

arch/arm/boot/dts/Makefile

@@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
 	bcm28155-ap.dtb

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -27,6 +27,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -57,6 +76,11 @@
 					marvell,pins = "mpp56";
 					marvell,function = "gpio";
 				};
+
+				poweroff: poweroff {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
 			};
 
 			mdio {
@@ -89,22 +113,6 @@
 					pwm_polarity = <0>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Connected to Marvell SATA controller */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected to FL1009 USB 3.0 controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 
@@ -160,7 +168,7 @@
 		button@1 {
 			label = "Power Button";
 			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 1>;
+			gpios = <&gpio1 30 0>;
 		};
 
 		button@2 {
@@ -176,4 +184,11 @@
 		};
 	};
 
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 1>;
+	};
+
 };