arm64: dts: qcom: ipq6018: enable USB2 support

Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
[baruch: adjust regs address/size; drop binding updates;
 drop unsupported quirk properties]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/59a0d43f34b69406cd320f16edc4e7fabe022bfd.1611756920.git.baruch@tkos.co.il
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts

@@ -78,3 +78,11 @@
 		nand-bus-width = <8>;
 	};
 };
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&usb2 {
+	status = "ok";
+};

arch/arm64/boot/dts/qcom/ipq6018.dtsi

@@ -524,6 +524,54 @@
 			};
 		};
 
+		qusb_phy_1: qusb@59000 {
+			compatible = "qcom,ipq6018-qusb2-phy";
+			reg = <0x0 0x059000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb2: usb2@7000000 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x070F8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_USB1_MASTER_CLK>,
+				 <&gcc GCC_USB1_SLEEP_CLK>,
+				 <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "master",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <24000000>;
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: dwc3@7000000 {
+			       compatible = "snps,dwc3";
+			       reg = <0x0 0x7000000 0x0 0xcd00>;
+			       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			       phys = <&qusb_phy_1>;
+			       phy-names = "usb2-phy";
+			       tx-fifo-resize;
+			       snps,is-utmi-l1-suspend;
+			       snps,hird-threshold = /bits/ 8 <0x0>;
+			       snps,dis_u2_susphy_quirk;
+			       snps,dis_u3_susphy_quirk;
+			       dr_mode = "host";
+			};
+		};
+
 	};
 
 	wcss: wcss-smp2p {