Merge tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/…

…pza/linux into drm-fixes

imx-drm: fixes for parallel-display, imx-tve, and ipu-common

These patches fix the parallel-display driver to use the standard OF
graph bindings for connecting a drm_panel via device tree instead of
an undocumented, driver specific device tree property, take care to
disable all IPU interrupts before setting up the irq chip to fix a
kexec lockup, and fix VGA output on i.MX53-QSB boards by correcting
the media bus format set by the imx-tve driver.

* tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: tve: fix media bus format for VGA output
  GPU: ipu: fix lockup caused by pending chained interrupts
  drm/imx: parallel-display: fix drm_panel support

Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt

@@ -65,8 +65,10 @@ Optional properties:
 - edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt.
+  Port 0 is the input port connected to the IPU display interface,
+  port 1 is the output port connected to a panel.
 
 example:
 
@@ -75,9 +77,29 @@ display@di0 {
 	edid = [edid-data];
 	interface-pix-fmt = "rgb24";
 
-	port {
+	port@0 {
+		reg = <0>;
+
 		display_in: endpoint {
 			remote-endpoint = <&ipu_di0_disp0>;
 		};
 	};
+
+	port@1 {
+		reg = <1>;
+
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+panel {
+	...
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&display_out>;
+		};
+	};
 };

drivers/gpu/drm/imx/imx-tve.c

@@ -301,7 +301,7 @@ static void imx_tve_encoder_prepare(struct drm_encoder *encoder)
 
 	switch (tve->mode) {
 	case TVE_MODE_VGA:
-		imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_YUV8_1X24,
+		imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_GBR888_1X24,
 					    tve->hsync_pin, tve->vsync_pin);
 		break;
 	case TVE_MODE_TVOUT:

drivers/gpu/drm/imx/parallel-display.c

@@ -21,6 +21,7 @@
 #include <drm/drm_panel.h>
 #include <linux/videodev2.h>
 #include <video/of_display_timing.h>
+#include <linux/of_graph.h>
 
 #include "imx-drm.h"
 
@@ -208,7 +209,7 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
 {
 	struct drm_device *drm = data;
 	struct device_node *np = dev->of_node;
-	struct device_node *panel_node;
+	struct device_node *port;
 	const u8 *edidp;
 	struct imx_parallel_display *imxpd;
 	int ret;
@@ -234,11 +235,19 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
 			imxpd->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI;
 	}
 
-	panel_node = of_parse_phandle(np, "fsl,panel", 0);
-	if (panel_node) {
-		imxpd->panel = of_drm_find_panel(panel_node);
-		if (!imxpd->panel)
-			return -EPROBE_DEFER;
+	/* port@1 is the output port */
+	port = of_graph_get_port_by_id(np, 1);
+	if (port) {
+		struct device_node *endpoint, *remote;
+
+		endpoint = of_get_child_by_name(port, "endpoint");
+		if (endpoint) {
+			remote = of_graph_get_remote_port_parent(endpoint);
+			if (remote)
+				imxpd->panel = of_drm_find_panel(remote);
+			if (!imxpd->panel)
+				return -EPROBE_DEFER;
+		}
 	}
 
 	imxpd->dev = dev;

drivers/gpu/ipu-v3/ipu-common.c

@@ -1107,6 +1107,9 @@ static int ipu_irq_init(struct ipu_soc *ipu)
 		return ret;
 	}
 
+	for (i = 0; i < IPU_NUM_IRQS; i += 32)
+		ipu_cm_write(ipu, 0, IPU_INT_CTRL(i / 32));
+
 	for (i = 0; i < IPU_NUM_IRQS; i += 32) {
 		gc = irq_get_domain_generic_chip(ipu->domain, i);
 		gc->reg_base = ipu->cm_reg;