Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/ker…

…nel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (107 commits)
  smc911x: fix compilation breakage wjen debug is on
  [netdrvr] eexpress: minor corrections
  add NAPI support to sb1250-mac.c
  ixgb: ROUND_UP macro cleanup in drivers/net/ixgb
  e1000: ROUND_UP macro cleanup in drivers/net/e1000
  Generic HDLC sparse annotations
  e100: Optionally use I/O mode only to access register space
  e100: allow bad MAC address when running with invalid eeprom csum
  ehea: fix for dlpar support
  ehea: fix for sysfs entries
  3C509: Remove unnecessary include of <linux/pm_legacy.h>
  NetXen: Fix for vmalloc issues
  NetXen: Fixes for Power PC architecture
  NetXen: Port swap feature for multi port cards
  NetXen: Removal of redundant macros
  NetXen: Multi PCI support for Quad cards
  NetXen: Removal of redundant argument passing
  NetXen: Use multiple PCI functions
  [netdrvr e100] experiment with doing RX in a similar manner to eepro100
  [PATCH] ieee80211: add missing global needed by IEEE80211_DEBUG_XXXX
  ...

Documentation/DocBook/kernel-api.tmpl

@@ -236,6 +236,12 @@ X!Ilib/string.c
 !Enet/core/dev.c
 !Enet/ethernet/eth.c
 !Iinclude/linux/etherdevice.h
+!Edrivers/net/phy/phy.c
+!Idrivers/net/phy/phy.c
+!Edrivers/net/phy/phy_device.c
+!Idrivers/net/phy/phy_device.c
+!Edrivers/net/phy/mdio_bus.c
+!Idrivers/net/phy/mdio_bus.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Enet/core/wireless.c
 -->

Documentation/networking/bcm43xx.txt

@@ -2,35 +2,88 @@
 			BCM43xx Linux Driver Project
 			============================
 
-About this software
--------------------
+Introduction
+------------
 
-The goal of this project is to develop a linux driver for Broadcom
-BCM43xx chips, based on the specification at 
-http://bcm-specs.sipsolutions.net/
+Many of the wireless devices found in modern notebook computers are
+based on the wireless chips produced by Broadcom. These devices have
+been a problem for Linux users as there is no open-source driver
+available. In addition, Broadcom has not released specifications
+for the device, and driver availability has been limited to the
+binary-only form used in the GPL versions of AP hardware such as the
+Linksys WRT54G, and the Windows and OS X drivers.  Before this project
+began, the only way to use these devices were to use the Windows or
+OS X drivers with either the Linuxant or ndiswrapper modules. There
+is a strong penalty if this method is used as loading the binary-only
+module "taints" the kernel, and no kernel developer will help diagnose
+any kernel problems.
 
-The project page is http://bcm43xx.berlios.de/
+Development
+-----------
 
+This driver has been developed using
+a clean-room technique that is described at
+http://bcm-specs.sipsolutions.net/ReverseEngineeringProcess. For legal
+reasons, none of the clean-room crew works on the on the Linux driver,
+and none of the Linux developers sees anything but the specifications,
+which are the ultimate product of the reverse-engineering group.
 
-Requirements
-------------
+Software
+--------
+
+Since the release of the 2.6.17 kernel, the bcm43xx driver has been
+distributed with the kernel source, and is prebuilt in most, if not
+all, distributions.  There is, however, additional software that is
+required. The firmware used by the chip is the intellectual property
+of Broadcom and they have not given the bcm43xx team redistribution
+rights to this firmware.  Since we cannot legally redistribute
+the firwmare we cannot include it with the driver. Furthermore, it
+cannot be placed in the downloadable archives of any distributing
+organization; therefore, the user is responsible for obtaining the
+firmware and placing it in the appropriate location so that the driver
+can find it when initializing.
+
+To help with this process, the bcm43xx developers provide a separate
+program named bcm43xx-fwcutter to "cut" the firmware out of a
+Windows or OS X driver and write the extracted files to the proper
+location. This program is usually provided with the distribution;
+however, it may be downloaded from
+
+http://developer.berlios.de/project/showfiles.php?group_id=4547
 
-1)	Linux Kernel 2.6.16 or later
-	http://www.kernel.org/
+The firmware is available in two versions. V3 firmware is used with
+the in-kernel bcm43xx driver that uses a software MAC layer called
+SoftMAC, and will have a microcode revision of 0x127 or smaller. The
+V4 firmware is used by an out-of-kernel driver employing a variation of
+the Devicescape MAC layer known as d80211. Once bcm43xx-d80211 reaches
+a satisfactory level of development, it will replace bcm43xx-softmac
+in the kernel as it is much more flexible and powerful.
 
-	You may want to configure your kernel with:
+A source for the latest V3 firmware is
 
-	CONFIG_DEBUG_FS (optional):
-		-> Kernel hacking
-		  -> Debug Filesystem
+http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o
 
-2)	SoftMAC IEEE 802.11 Networking Stack extension and patched ieee80211
-	modules:
-	http://softmac.sipsolutions.net/
+Once this file is downloaded, the command
+'bcm43xx-fwcutter -w <dir> <filename>'
+will extract the microcode and write it to directory
+<dir>. The correct directory will depend on your distribution;
+however, most use '/lib/firmware'. Once this step is completed,
+the bcm3xx driver should load when the system is booted. To see
+any messages relating to the driver, issue the command 'dmesg |
+grep bcm43xx' from a terminal window. If there are any problems,
+please send that output to Bcm43xx-dev@lists.berlios.de.
 
-3)	Firmware Files
+Although the driver has been in-kernel since 2.6.17, the earliest
+version is quite limited in its capability. Patches that include
+all features of later versions are available for the stable kernel
+versions from 2.6.18. These will be needed if you use a BCM4318,
+or a PCI Express version (BCM4311 and BCM4312). In addition, if you
+have an early BCM4306 and more than 1 GB RAM, your kernel will need
+to be patched.	These patches, which are being updated regularly,
+are available at ftp://lwfinger.dynalias.org/patches. Look for
+combined_2.6.YY.patch. Of course you will need kernel source downloaded
+from kernel.org, or the source from your distribution.
 
-	Please try fwcutter. Fwcutter can extract the firmware from various 
-	binary driver files. It supports driver files from Windows, MacOS and 
-	Linux. You can get fwcutter from http://bcm43xx.berlios.de/.
-	Also, fwcutter comes with a README file for further instructions.
+If you build your own kernel, please enable CONFIG_BCM43XX_DEBUG
+and CONFIG_IEEE80211_SOFTMAC_DEBUG. The log information provided is
+essential for solving any problems.

MAINTAINERS

@@ -1582,9 +1582,9 @@ S:	Supported
 
 HOST AP DRIVER
 P:	Jouni Malinen
-M:	jkmaline@cc.hut.fi
+M:	j@w1.fi
+L:	hostap@shmoo.com (subscribers-only)
 L:	linux-wireless@vger.kernel.org
-L:	hostap@shmoo.com
 W:	http://hostap.epitest.fi/
 S:	Maintained
 
@@ -1811,6 +1811,7 @@ P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
 P:	Auke Kok
 M:	auke-jan.h.kok@intel.com
+L:	e1000-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
@@ -1825,6 +1826,7 @@ P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
 P:	Auke Kok
 M:	auke-jan.h.kok@intel.com
+L:	e1000-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
@@ -1839,6 +1841,7 @@ P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
 P:	Auke Kok
 M:	auke-jan.h.kok@intel.com
+L:	e1000-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
@@ -2500,6 +2503,19 @@ M:	adaplas@gmail.com
 L:	linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
+NETERION (S2IO) Xframe 10GbE DRIVER
+P:	Ramkrishna Vepa
+M:	ram.vepa@neterion.com
+P:	Rastapur Santosh
+M:	santosh.rastapur@neterion.com
+P:	Sivakumar Subramani
+M:	sivakumar.subramani@neterion.com
+P:	Sreenivasa Honnur
+M:	sreenivasa.honnur@neterion.com
+L:	netdev@vger.kernel.org
+W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/TitleIndex?anonymous
+S:	Supported
+
 OPENCORES I2C BUS DRIVER
 P:	Peter Korsgaard
 M:	jacmet@sunsite.dk

arch/mips/mips-boards/sim/Makefile

@@ -17,7 +17,8 @@
 # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
 #
 
-obj-y := sim_setup.o sim_mem.o sim_time.o sim_int.o sim_cmdline.o
+obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \
+	 sim_cmdline.o
 
 obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
 obj-$(CONFIG_SMP) += sim_smp.o

arch/mips/mips-boards/sim/sim_platform.c

@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/init.h>
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+static char mipsnet_string[] = "mipsnet";
+
+static struct platform_device eth1_device = {
+	.name		= mipsnet_string,
+	.id		= 0,
+};
+
+/*
+ * Create a platform device for the GPI port that receives the
+ * image data from the embedded camera.
+ */
+static int __init mipsnet_devinit(void)
+{
+	int err;
+
+	err = platform_device_register(&eth1_device);
+	if (err)
+		printk(KERN_ERR "%s: registration failed\n", mipsnet_string);
+
+	return err;
+}
+
+device_initcall(mipsnet_devinit);

arch/powerpc/sysdev/qe_lib/ucc_fast.c

@@ -210,6 +210,9 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uf_regs = uccf->uf_regs;
 	uccf->p_ucce = (u32 *) & (uf_regs->ucce);
 	uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+	uccf->p_utodr = (u16 *) & (uf_regs->utodr);
+#endif
 #ifdef STATISTICS
 	uccf->tx_frames = 0;
 	uccf->rx_frames = 0;

crypto/michael_mic.c

@@ -3,7 +3,7 @@
  *
  * Michael MIC (IEEE 802.11i/TKIP) keyed digest
  *
- * Copyright (c) 2004 Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright (c) 2004 Jouni Malinen <j@w1.fi>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -173,4 +173,4 @@ module_exit(michael_mic_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Michael MIC");
-MODULE_AUTHOR("Jouni Malinen <jkmaline@cc.hut.fi>");
+MODULE_AUTHOR("Jouni Malinen <j@w1.fi>");

drivers/net/3c509.c

@@ -83,7 +83,6 @@ static int max_interrupt_work = 10;
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>	/* for udelay() */
 #include <linux/spinlock.h>

drivers/net/Kconfig

@@ -486,8 +486,8 @@ config SGI_IOC3_ETH_HW_TX_CSUM
 	  enables offloading for checksums on transmit.  If unsure, say Y.
 
 config MIPS_SIM_NET
-	tristate "MIPS simulator Network device (EXPERIMENTAL)"
-	depends on MIPS_SIM && EXPERIMENTAL
+	tristate "MIPS simulator Network device"
+	depends on NET_ETHERNET && MIPS_SIM
 	help
 	  The MIPSNET device is a simple Ethernet network device which is
 	  emulated by the MIPS Simulator.
@@ -1444,7 +1444,8 @@ config CS89x0
 
 config TC35815
 	tristate "TOSHIBA TC35815 Ethernet support"
-	depends on NET_PCI && PCI && TOSHIBA_JMR3927
+	depends on NET_PCI && PCI && MIPS
+	select MII
 
 config DGRS
 	tristate "Digi Intl. RightSwitch SE-X support"
@@ -2291,14 +2292,10 @@ config UGETH_FILTERING
 	bool "Mac address filtering support"
 	depends on UCC_GETH
 
-config UGETH_TX_ON_DEMOND
-	bool "Transmit on Demond support"
+config UGETH_TX_ON_DEMAND
+	bool "Transmit on Demand support"
 	depends on UCC_GETH
 
-config UGETH_HAS_GIGA
-	bool
-	depends on UCC_GETH && PPC_MPC836x
-
 config MV643XX_ETH
 	tristate "MV-643XX Ethernet support"
 	depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)

drivers/net/Makefile

@@ -18,7 +18,7 @@ gianfar_driver-objs := gianfar.o \
 		gianfar_sysfs.o
 
 obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
-ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o
+ucc_geth_driver-objs := ucc_geth.o ucc_geth_mii.o
 
 #
 # link order important here

drivers/net/chelsio/Makefile

@@ -4,8 +4,6 @@
 
 obj-$(CONFIG_CHELSIO_T1) += cxgb.o
 
-cxgb-$(CONFIG_CHELSIO_T1_1G) += ixf1010.o mac.o mv88e1xxx.o vsc7326.o vsc8244.o
+cxgb-$(CONFIG_CHELSIO_T1_1G) += mac.o mv88e1xxx.o vsc7326.o
 cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o \
 	     mv88x201x.o my3126.o $(cxgb-y)
-
-

drivers/net/chelsio/common.h

@@ -322,9 +322,9 @@ struct board_info {
 	unsigned char           mdio_mdiinv;
 	unsigned char           mdio_mdc;
 	unsigned char           mdio_phybaseaddr;
-	struct gmac            *gmac;
-	struct gphy            *gphy;
-	struct mdio_ops        *mdio_ops;
+	const struct gmac      *gmac;
+	const struct gphy      *gphy;
+	const struct mdio_ops  *mdio_ops;
 	const char             *desc;
 };
 

drivers/net/chelsio/cphy.h

@@ -100,7 +100,7 @@ struct cphy {
 
 	u32 elmer_gpo;
 
-	struct cphy_ops *ops;                /* PHY operations */
+	const struct cphy_ops *ops;            /* PHY operations */
 	int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr,
 			 int reg_addr, unsigned int *val);
 	int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr,
@@ -136,7 +136,7 @@ static inline int simple_mdio_write(struct cphy *cphy, int reg,
 /* Convenience initializer */
 static inline void cphy_init(struct cphy *phy, adapter_t *adapter,
 			     int phy_addr, struct cphy_ops *phy_ops,
-			     struct mdio_ops *mdio_ops)
+			     const struct mdio_ops *mdio_ops)
 {
 	phy->adapter = adapter;
 	phy->addr    = phy_addr;
@@ -151,7 +151,7 @@ static inline void cphy_init(struct cphy *phy, adapter_t *adapter,
 struct gphy {
 	/* Construct a PHY instance with the given PHY address */
 	struct cphy *(*create)(adapter_t *adapter, int phy_addr,
-			       struct mdio_ops *mdio_ops);
+			       const struct mdio_ops *mdio_ops);
 
 	/*
 	 * Reset the PHY chip.  This resets the whole PHY chip, not individual
@@ -160,11 +160,9 @@ struct gphy {
 	int (*reset)(adapter_t *adapter);
 };
 
-extern struct gphy t1_my3126_ops;
-extern struct gphy t1_mv88e1xxx_ops;
-extern struct gphy t1_vsc8244_ops;
-extern struct gphy t1_xpak_ops;
-extern struct gphy t1_mv88x201x_ops;
-extern struct gphy t1_dummy_phy_ops;
+extern const struct gphy t1_my3126_ops;
+extern const struct gphy t1_mv88e1xxx_ops;
+extern const struct gphy t1_vsc8244_ops;
+extern const struct gphy t1_mv88x201x_ops;
 
 #endif /* _CXGB_CPHY_H_ */

drivers/net/chelsio/gmac.h

@@ -126,7 +126,7 @@ typedef struct _cmac_instance cmac_instance;
 struct cmac {
 	struct cmac_statistics stats;
 	adapter_t *adapter;
-	struct cmac_ops *ops;
+	const struct cmac_ops *ops;
 	cmac_instance *instance;
 };
 
@@ -136,11 +136,7 @@ struct gmac {
 	int (*reset)(adapter_t *);
 };
 
-extern struct gmac t1_pm3393_ops;
-extern struct gmac t1_chelsio_mac_ops;
-extern struct gmac t1_vsc7321_ops;
-extern struct gmac t1_vsc7326_ops;
-extern struct gmac t1_ixf1010_ops;
-extern struct gmac t1_dummy_mac_ops;
+extern const struct gmac t1_pm3393_ops;
+extern const struct gmac t1_vsc7326_ops;
 
 #endif /* _CXGB_GMAC_H_ */