iscsi-target: Add iSCSI fabric support for target v4.1

The Linux-iSCSI.org target module is a full featured in-kernel
software implementation of iSCSI target mode (RFC-3720) for the
current WIP mainline target v4.1 infrastructure code for the v3.1
kernel.  More information can be found here:

http://linux-iscsi.org/wiki/ISCSI

This includes support for:

   * RFC-3720 defined request / response state machines and support for
     all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi
     include/scsi/iscsi_proto.h PDU definitions
   * Target v4.1 compatible control plane using the generic layout in
     target_core_fabric_configfs.c and fabric dependent attributes
     within /sys/kernel/config/target/iscsi/ subdirectories.
   * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS)
   * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs
   * iSCSI Error Recovery Hierarchy support
   * Per iSCSI connection RX/TX thread pair scheduling affinity
   * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto
   * CHAP Authentication support using libcrypto
   * Conversion to use internal SGl allocation with iscsit_alloc_buffs() ->
     transport_generic_map_mem_to_cmd()

(nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit:
      iscsi: Use struct scsi_lun in iscsi structs instead of u8[8])
(nab: Fix 32-bit compile warnings)

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andy Grover <agrover@redhat.com>
Acked-by: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>

drivers/target/Kconfig

@@ -31,5 +31,6 @@ config TCM_PSCSI
 
 source "drivers/target/loopback/Kconfig"
 source "drivers/target/tcm_fc/Kconfig"
+source "drivers/target/iscsi/Kconfig"
 
 endif

drivers/target/Makefile

@@ -24,5 +24,5 @@ obj-$(CONFIG_TCM_PSCSI)		+= target_core_pscsi.o
 
 # Fabric modules
 obj-$(CONFIG_LOOPBACK_TARGET)	+= loopback/
-
 obj-$(CONFIG_TCM_FC)		+= tcm_fc/
+obj-$(CONFIG_ISCSI_TARGET)	+= iscsi/

drivers/target/iscsi/Kconfig

@@ -0,0 +1,8 @@
+config ISCSI_TARGET
+	tristate "Linux-iSCSI.org iSCSI Target Mode Stack"
+	select CRYPTO
+	select CRYPTO_CRC32C
+	select CRYPTO_CRC32C_INTEL if X86
+	help
+	Say M here to enable the ConfigFS enabled Linux-iSCSI.org iSCSI
+	Target Mode Stack.

drivers/target/iscsi/Makefile

@@ -0,0 +1,20 @@
+iscsi_target_mod-y +=		iscsi_target_parameters.o \
+				iscsi_target_seq_pdu_list.o \
+				iscsi_target_tq.o \
+				iscsi_target_auth.o \
+				iscsi_target_datain_values.o \
+				iscsi_target_device.o \
+				iscsi_target_erl0.o \
+				iscsi_target_erl1.o \
+				iscsi_target_erl2.o \
+				iscsi_target_login.o \
+				iscsi_target_nego.o \
+				iscsi_target_nodeattrib.o \
+				iscsi_target_tmr.o \
+				iscsi_target_tpg.o \
+				iscsi_target_util.o \
+				iscsi_target.o \
+				iscsi_target_configfs.o \
+				iscsi_target_stat.o
+
+obj-$(CONFIG_ISCSI_TARGET)	+= iscsi_target_mod.o