Merge branch 'lorenzo/pci/rockchip'

  - update arm64 defconfig for Rockchip (Shawn Lin)

  - refactor Rockchip code to facilitate both root port and endpoint mode
    (Shawn Lin)

  - add Rockchip endpoint mode driver (Shawn Lin)

* lorenzo/pci/rockchip:
  arm64: defconfig: update config for Rockchip PCIe
  dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe EP driver
  PCI: rockchip: Add EP driver for Rockchip PCIe controller
  dt-bindings: PCI: rockchip: Rename rockchip-pcie.txt to rockchip-pcie-host.txt
  PCI: rockchip: Split out common function to init controller
  PCI: rockchip: Split out rockchip_pcie_parse_dt() to parse DT
  PCI: rockchip: Separate common code from RC driver

# Conflicts:
#	drivers/pci/host/pcie-rockchip.c

Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt

@@ -0,0 +1,62 @@
+* Rockchip AXI PCIe Endpoint Controller DT description
+
+Required properties:
+- compatible: Should contain "rockchip,rk3399-pcie-ep"
+- reg: Two register ranges as listed in the reg-names property
+- reg-names: Must include the following names
+	- "apb-base"
+	- "mem-base"
+- clocks: Must contain an entry for each entry in clock-names.
+		See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+	- "aclk"
+	- "aclk-perf"
+	- "hclk"
+	- "pm"
+- resets: Must contain seven entries for each entry in reset-names.
+	   See ../reset/reset.txt for details.
+- reset-names: Must include the following names
+	- "core"
+	- "mgmt"
+	- "mgmt-sticky"
+	- "pipe"
+	- "pm"
+	- "aclk"
+	- "pclk"
+- pinctrl-names : The pin control state names
+- pinctrl-0: The "default" pinctrl state
+- phys: Must contain an phandle to a PHY for each entry in phy-names.
+- phy-names: Must include 4 entries for all 4 lanes even if some of
+  them won't be used for your cases. Entries are of the form "pcie-phy-N":
+  where N ranges from 0 to 3.
+  (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
+  for changing the #phy-cells of phy node to support it)
+- rockchip,max-outbound-regions: Maximum number of outbound regions
+
+Optional Property:
+- num-lanes: number of lanes to use
+- max-functions: Maximum number of functions that can be configured (default 1).
+
+pcie0-ep: pcie@f8000000 {
+	compatible = "rockchip,rk3399-pcie-ep";
+	#address-cells = <3>;
+	#size-cells = <2>;
+	rockchip,max-outbound-regions = <16>;
+	clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+		 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+	clock-names = "aclk", "aclk-perf",
+		      "hclk", "pm";
+	max-functions = /bits/ 8 <8>;
+	num-lanes = <4>;
+	reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
+	reg-names = "apb-base", "mem-base";
+	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+		      "pm", "pclk", "aclk";
+	phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
+	phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreq>;
+};

MAINTAINERS

@@ -10947,8 +10947,8 @@ M:	Shawn Lin <shawn.lin@rock-chips.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-rockchip@lists.infradead.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/rockchip-pcie.txt
-F:	drivers/pci/host/pcie-rockchip.c
+F:	Documentation/devicetree/bindings/pci/rockchip-pcie*
+F:	drivers/pci/host/pcie-rockchip*
 
 PCI DRIVER FOR V3 SEMICONDUCTOR V360EPC
 M:	Linus Walleij <linus.walleij@linaro.org>

arch/arm64/configs/defconfig

@@ -78,7 +78,8 @@ CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCI_AARDVARK=y
 CONFIG_PCI_TEGRA=y
 CONFIG_PCIE_RCAR=y
-CONFIG_PCIE_ROCKCHIP=m
+CONFIG_PCIE_ROCKCHIP=y
+CONFIG_PCIE_ROCKCHIP_HOST=m
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
 CONFIG_PCI_HOST_THUNDER_PEM=y

drivers/pci/host/Kconfig

@@ -179,16 +179,33 @@ config PCI_HOST_THUNDER_ECAM
 	  Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
 
 config PCIE_ROCKCHIP
-	tristate "Rockchip PCIe controller"
+	bool
+	depends on PCI
+
+config PCIE_ROCKCHIP_HOST
+	tristate "Rockchip PCIe host controller"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	select MFD_SYSCON
+	select PCIE_ROCKCHIP
 	help
 	  Say Y here if you want internal PCI support on Rockchip SoC.
 	  There is 1 internal PCIe port available to support GEN2 with
 	  4 slots.
 
+config PCIE_ROCKCHIP_EP
+	bool "Rockchip PCIe endpoint controller"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on OF
+	depends on PCI_ENDPOINT
+	select MFD_SYSCON
+	select PCIE_ROCKCHIP
+	help
+	  Say Y here if you want to support Rockchip PCIe controller in
+	  endpoint mode on Rockchip SoC. There is 1 internal PCIe port
+	  available to support GEN2 with 4 slots.
+
 config PCIE_MEDIATEK
 	bool "MediaTek PCIe controller"
 	depends on ARCH_MEDIATEK || COMPILE_TEST

drivers/pci/host/Makefile

@@ -20,6 +20,8 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
 obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
+obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
+obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
 obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
 obj-$(CONFIG_VMD) += vmd.o