Merge tag 'spi-fix-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A small clutch of driver specific fixes.

  The OMAP one is a bit worrying since it seems to be triggered by some
  changes in the runtime PM core code and I suspect there's other
  drivers across that are going to be using the same pattern outside of
  OMAP but nothing seems to be coming up in the testing people are
  doing"

* tag 'spi-fix-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: omap2-mcspi: Fix PM regression with deferred probe for pm_runtime_reinit
  spi: bcm2835aux: fix bitmask defines
  spi: atmel: fix gpio chip-select in case of non-DT platform
  spi/fsl-espi: Correct the maximum transaction length
  spi: imx: fix spi resource leak with dma transfer
  spi: fix counting in spi-loopback-test code

drivers/spi/spi-atmel.c

@@ -1571,6 +1571,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
 
 	as->use_cs_gpios = true;
 	if (atmel_spi_is_v2(as) &&
+	    pdev->dev.of_node &&
 	    !of_get_property(pdev->dev.of_node, "cs-gpios", NULL)) {
 		as->use_cs_gpios = false;
 		master->num_chipselect = 4;

drivers/spi/spi-bcm2835aux.c

@@ -73,8 +73,8 @@
 
 /* Bitfields in CNTL1 */
 #define BCM2835_AUX_SPI_CNTL1_CSHIGH	0x00000700
-#define BCM2835_AUX_SPI_CNTL1_IDLE	0x00000080
-#define BCM2835_AUX_SPI_CNTL1_TXEMPTY	0x00000040
+#define BCM2835_AUX_SPI_CNTL1_TXEMPTY	0x00000080
+#define BCM2835_AUX_SPI_CNTL1_IDLE	0x00000040
 #define BCM2835_AUX_SPI_CNTL1_MSBF_IN	0x00000002
 #define BCM2835_AUX_SPI_CNTL1_KEEP_IN	0x00000001
 

drivers/spi/spi-fsl-espi.c

@@ -84,7 +84,7 @@ struct fsl_espi_transfer {
 /* SPCOM register values */
 #define SPCOM_CS(x)		((x) << 30)
 #define SPCOM_TRANLEN(x)	((x) << 0)
-#define	SPCOM_TRANLEN_MAX	0xFFFF	/* Max transaction length */
+#define	SPCOM_TRANLEN_MAX	0x10000	/* Max transaction length */
 
 #define AUTOSUSPEND_TIMEOUT 2000
 
@@ -233,7 +233,7 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
 	reinit_completion(&mpc8xxx_spi->done);
 
 	/* Set SPCOM[CS] and SPCOM[TRANLEN] field */
-	if ((t->len - 1) > SPCOM_TRANLEN_MAX) {
+	if (t->len > SPCOM_TRANLEN_MAX) {
 		dev_err(mpc8xxx_spi->dev, "Transaction length (%d)"
 				" beyond the SPCOM[TRANLEN] field\n", t->len);
 		return -EINVAL;

drivers/spi/spi-imx.c

@@ -929,7 +929,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					tx->sgl, tx->nents, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_tx)
-			goto no_dma;
+			goto tx_nodma;
 
 		desc_tx->callback = spi_imx_dma_tx_callback;
 		desc_tx->callback_param = (void *)spi_imx;
@@ -941,7 +941,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					rx->sgl, rx->nents, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_rx)
-			goto no_dma;
+			goto rx_nodma;
 
 		desc_rx->callback = spi_imx_dma_rx_callback;
 		desc_rx->callback_param = (void *)spi_imx;
@@ -1008,7 +1008,9 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 
 	return ret;
 
-no_dma:
+rx_nodma:
+	dmaengine_terminate_all(master->dma_tx);
+tx_nodma:
 	pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
 		     dev_driver_string(&master->dev),
 		     dev_name(&master->dev));

drivers/spi/spi-loopback-test.c

@@ -761,6 +761,7 @@ static int spi_test_run_iter(struct spi_device *spi,
 		test.iterate_transfer_mask = 1;
 
 	/* count number of transfers with tx/rx_buf != NULL */
+	rx_count = tx_count = 0;
 	for (i = 0; i < test.transfer_count; i++) {
 		if (test.transfers[i].tx_buf)
 			tx_count++;

drivers/spi/spi-omap2-mcspi.c

@@ -1490,6 +1490,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	return status;
 
 disable_pm:
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 free_master:
 	spi_master_put(master);
@@ -1501,6 +1503,7 @@ static int omap2_mcspi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
 
+	pm_runtime_dont_use_autosuspend(mcspi->dev);
 	pm_runtime_put_sync(mcspi->dev);
 	pm_runtime_disable(&pdev->dev);