drivers/net/tile/: on-chip network drivers for the tile architecture

This change adds the first network driver for the tile architecture,
supporting the on-chip XGBE and GBE shims.

The infrastructure is present for the TILE-Gx networking drivers (another
three source files in the new directory) but for now the the actual
tilegx sources are waiting on releasing hardware to initial customers.

Note that arch/tile/include/hv/* are "upstream" headers from the
Tilera hypervisor and will probably benefit less from LKML review.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

MAINTAINERS

@@ -5828,6 +5828,7 @@ W:	http://www.tilera.com/scm/
 S:	Supported
 F:	arch/tile/
 F:	drivers/char/hvc_tile.c
+F:	drivers/net/tile/
 
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>

arch/tile/include/asm/cacheflush.h

@@ -137,4 +137,56 @@ static inline void finv_buffer(void *buffer, size_t size)
 	mb_incoherent();
 }
 
+/*
+ * Flush & invalidate a VA range that is homed remotely on a single core,
+ * waiting until the memory controller holds the flushed values.
+ */
+static inline void finv_buffer_remote(void *buffer, size_t size)
+{
+	char *p;
+	int i;
+
+	/*
+	 * Flush and invalidate the buffer out of the local L1/L2
+	 * and request the home cache to flush and invalidate as well.
+	 */
+	__finv_buffer(buffer, size);
+
+	/*
+	 * Wait for the home cache to acknowledge that it has processed
+	 * all the flush-and-invalidate requests.  This does not mean
+	 * that the flushed data has reached the memory controller yet,
+	 * but it does mean the home cache is processing the flushes.
+	 */
+	__insn_mf();
+
+	/*
+	 * Issue a load to the last cache line, which can't complete
+	 * until all the previously-issued flushes to the same memory
+	 * controller have also completed.  If we weren't striping
+	 * memory, that one load would be sufficient, but since we may
+	 * be, we also need to back up to the last load issued to
+	 * another memory controller, which would be the point where
+	 * we crossed an 8KB boundary (the granularity of striping
+	 * across memory controllers).  Keep backing up and doing this
+	 * until we are before the beginning of the buffer, or have
+	 * hit all the controllers.
+	 */
+	for (i = 0, p = (char *)buffer + size - 1;
+	     i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
+	     ++i) {
+		const unsigned long STRIPE_WIDTH = 8192;
+
+		/* Force a load instruction to issue. */
+		*(volatile char *)p;
+
+		/* Jump to end of previous stripe. */
+		p -= STRIPE_WIDTH;
+		p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
+	}
+
+	/* Wait for the loads (and thus flushes) to have completed. */
+	__insn_mf();
+}
+
 #endif /* _ASM_TILE_CACHEFLUSH_H */

arch/tile/include/asm/processor.h

@@ -292,8 +292,18 @@ extern int kstack_hash;
 /* Are we using huge pages in the TLB for kernel data? */
 extern int kdata_huge;
 
+/* Support standard Linux prefetching. */
+#define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
 #define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
 
+/* Bring a value into the L1D, faulting the TLB if necessary. */
+#ifdef __tilegx__
+#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
+#else
+#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
+#endif
+
 #else /* __ASSEMBLY__ */
 
 /* Do some slow action (e.g. read a slow SPR). */

arch/tile/include/hv/drv_xgbe_impl.h

@@ -0,0 +1,300 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drivers/xgbe/impl.h
+ * Implementation details for the NetIO library.
+ */
+
+#ifndef __DRV_XGBE_IMPL_H__
+#define __DRV_XGBE_IMPL_H__
+
+#include <hv/netio_errors.h>
+#include <hv/netio_intf.h>
+#include <hv/drv_xgbe_intf.h>
+
+
+/** How many groups we have (log2). */
+#define LOG2_NUM_GROUPS (12)
+/** How many groups we have. */
+#define NUM_GROUPS (1 << LOG2_NUM_GROUPS)
+
+/** Number of output requests we'll buffer per tile. */
+#define EPP_REQS_PER_TILE (32)
+
+/** Words used in an eDMA command without checksum acceleration. */
+#define EDMA_WDS_NO_CSUM      8
+/** Words used in an eDMA command with checksum acceleration. */
+#define EDMA_WDS_CSUM        10
+/** Total available words in the eDMA command FIFO. */
+#define EDMA_WDS_TOTAL      128
+
+
+/*
+ * FIXME: These definitions are internal and should have underscores!
+ * NOTE: The actual numeric values here are intentional and allow us to
+ * optimize the concept "if small ... else if large ... else ...", by
+ * checking for the low bit being set, and then for non-zero.
+ * These are used as array indices, so they must have the values (0, 1, 2)
+ * in some order.
+ */
+#define SIZE_SMALL (1)       /**< Small packet queue. */
+#define SIZE_LARGE (2)       /**< Large packet queue. */
+#define SIZE_JUMBO (0)       /**< Jumbo packet queue. */
+
+/** The number of "SIZE_xxx" values. */
+#define NETIO_NUM_SIZES 3
+
+
+/*
+ * Default numbers of packets for IPP drivers.  These values are chosen
+ * such that CIPP1 will not overflow its L2 cache.
+ */
+
+/** The default number of small packets. */
+#define NETIO_DEFAULT_SMALL_PACKETS 2750
+/** The default number of large packets. */
+#define NETIO_DEFAULT_LARGE_PACKETS 2500
+/** The default number of jumbo packets. */
+#define NETIO_DEFAULT_JUMBO_PACKETS 250
+
+
+/** Log2 of the size of a memory arena. */
+#define NETIO_ARENA_SHIFT      24      /* 16 MB */
+/** Size of a memory arena. */
+#define NETIO_ARENA_SIZE       (1 << NETIO_ARENA_SHIFT)
+
+
+/** A queue of packets.
+ *
+ * This structure partially defines a queue of packets waiting to be
+ * processed.  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other part of the queue state, the read offset, is
+ * kept in user space, not in hypervisor space, so it is in a separate data
+ * structure.
+ *
+ * The read offset (__packet_receive_read in the user part of the queue
+ * structure) points to the next packet to be read. When the read offset is
+ * equal to the write offset, the queue is empty; therefore the queue must
+ * contain one more slot than the required maximum queue size.
+ *
+ * Here's an example of all 3 state variables and what they mean.  All
+ * pointers move left to right.
+ *
+ * @code
+ *   I   I   V   V   V   V   I   I   I   I
+ *   0   1   2   3   4   5   6   7   8   9  10
+ *           ^       ^       ^               ^
+ *           |               |               |
+ *           |               |               __last_packet_plus_one
+ *           |               __buffer_write
+ *           __packet_receive_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one
+ * = 10).  The read pointer is at 2, and the write pointer is at 6; thus,
+ * there are valid, unread packets in slots 2, 3, 4, and 5.  The remaining
+ * slots are invalid (do not contain a packet).
+ */
+typedef struct {
+  /** Byte offset of the next notify packet to be written: zero for the first
+   *  packet on the queue, sizeof (netio_pkt_t) for the second packet on the
+   *  queue, etc. */
+  volatile uint32_t __packet_write;
+
+  /** Offset of the packet after the last valid packet (i.e., when any
+   *  pointer is incremented to this value, it wraps back to zero). */
+  uint32_t __last_packet_plus_one;
+}
+__netio_packet_queue_t;
+
+
+/** A queue of buffers.
+ *
+ * This structure partially defines a queue of empty buffers which have been
+ * obtained via requests to the IPP.  (The elements of the queue are packet
+ * handles, which are transformed into a full netio_pkt_t when the buffer is
+ * retrieved.)  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other parts of the queue state, the read offset and
+ * requested write offset, are kept in user space, not in hypervisor space, so
+ * they are in a separate data structure.
+ *
+ * The read offset (__buffer_read in the user part of the queue structure)
+ * points to the next buffer to be read. When the read offset is equal to the
+ * write offset, the queue is empty; therefore the queue must contain one more
+ * slot than the required maximum queue size.
+ *
+ * The requested write offset (__buffer_requested_write in the user part of
+ * the queue structure) points to the slot which will hold the next buffer we
+ * request from the IPP, once we get around to sending such a request.  When
+ * the requested write offset is equal to the write offset, no requests for
+ * new buffers are outstanding; when the requested write offset is one greater
+ * than the read offset, no more requests may be sent.
+ *
+ * Note that, unlike the packet_queue, the buffer_queue places incoming
+ * buffers at decreasing addresses.  This makes the check for "is it time to
+ * wrap the buffer pointer" cheaper in the assembly code which receives new
+ * buffers, and means that the value which defines the queue size,
+ * __last_buffer, is different than in the packet queue.  Also, the offset
+ * used in the packet_queue is already scaled by the size of a packet; here we
+ * use unscaled slot indices for the offsets.  (These differences are
+ * historical, and in the future it's possible that the packet_queue will look
+ * more like this queue.)
+ *
+ * @code
+ * Here's an example of all 4 state variables and what they mean.  Remember:
+ * all pointers move right to left.
+ *
+ *   V   V   V   I   I   R   R   V   V   V
+ *   0   1   2   3   4   5   6   7   8   9
+ *           ^       ^       ^           ^
+ *           |       |       |           |
+ *           |       |       |           __last_buffer
+ *           |       |       __buffer_write
+ *           |       __buffer_requested_write
+ *           __buffer_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9).
+ * The read pointer is at 2, and the write pointer is at 6; thus, there are
+ * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7.  The requested write
+ * pointer is at 4; thus, requests have been made to the IPP for buffers which
+ * will be placed in slots 6 and 5 when they arrive.  Finally, the remaining
+ * slots are invalid (do not contain a buffer).
+ */
+typedef struct
+{
+  /** Ordinal number of the next buffer to be written: 0 for the first slot in
+   *  the queue, 1 for the second slot in the queue, etc. */
+  volatile uint32_t __buffer_write;
+
+  /** Ordinal number of the last buffer (i.e., when any pointer is decremented
+   *  below zero, it is reloaded with this value). */
+  uint32_t __last_buffer;
+}
+__netio_buffer_queue_t;
+
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+typedef struct __netio_queue_impl_t
+{
+  /** The queue of packets waiting to be received. */
+  __netio_packet_queue_t __packet_receive_queue;
+  /** The intr bit mask that IDs this device. */
+  unsigned int __intr_id;
+  /** Offset to queues of empty buffers, one per size. */
+  uint32_t __buffer_queue[NETIO_NUM_SIZES];
+  /** The address of the first EPP tile, or -1 if no EPP. */
+  /* ISSUE: Actually this is always "0" or "~0". */
+  uint32_t __epp_location;
+  /** The queue ID that this queue represents. */
+  unsigned int __queue_id;
+  /** Number of acknowledgements received. */
+  volatile uint32_t __acks_received;
+  /** Last completion number received for packet_sendv. */
+  volatile uint32_t __last_completion_rcv;
+  /** Number of packets allowed to be outstanding. */
+  uint32_t __max_outstanding;
+  /** First VA available for packets. */
+  void* __va_0;
+  /** First VA in second range available for packets. */
+  void* __va_1;
+  /** Padding to align the "__packets" field to the size of a netio_pkt_t. */
+  uint32_t __padding[3];
+  /** The packets themselves. */
+  netio_pkt_t __packets[0];
+}
+netio_queue_impl_t;
+
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+typedef struct __netio_queue_user_impl_t
+{
+  /** The next incoming packet to be read. */
+  uint32_t __packet_receive_read;
+  /** The next empty buffers to be read, one index per size. */
+  uint8_t __buffer_read[NETIO_NUM_SIZES];
+  /** Where the empty buffer we next request from the IPP will go, one index
+   * per size. */
+  uint8_t __buffer_requested_write[NETIO_NUM_SIZES];
+  /** PCIe interface flag. */
+  uint8_t __pcie;
+  /** Number of packets left to be received before we send a credit update. */
+  uint32_t __receive_credit_remaining;
+  /** Value placed in __receive_credit_remaining when it reaches zero. */
+  uint32_t __receive_credit_interval;
+  /** First fast I/O routine index. */
+  uint32_t __fastio_index;
+  /** Number of acknowledgements expected. */
+  uint32_t __acks_outstanding;
+  /** Last completion number requested. */
+  uint32_t __last_completion_req;
+  /** File descriptor for driver. */
+  int __fd;
+}
+netio_queue_user_impl_t;
+
+
+#define NETIO_GROUP_CHUNK_SIZE   64   /**< Max # groups in one IPP request */
+#define NETIO_BUCKET_CHUNK_SIZE  64   /**< Max # buckets in one IPP request */
+
+
+/** Internal structure used to convey packet send information to the
+ * hypervisor.  FIXME: Actually, it's not used for that anymore, but
+ * netio_packet_send() still uses it internally.
+ */
+typedef struct
+{
+  uint16_t flags;              /**< Packet flags (__NETIO_SEND_FLG_xxx) */
+  uint16_t transfer_size;      /**< Size of packet */
+  uint32_t va;                 /**< VA of start of packet */
+  __netio_pkt_handle_t handle; /**< Packet handle */
+  uint32_t csum0;              /**< First checksum word */
+  uint32_t csum1;              /**< Second checksum word */
+}
+__netio_send_cmd_t;
+
+
+/** Flags used in two contexts:
+ *  - As the "flags" member in the __netio_send_cmd_t, above; used only
+ *    for netio_pkt_send_{prepare,commit}.
+ *  - As part of the flags passed to the various send packet fast I/O calls.
+ */
+
+/** Need acknowledgement on this packet.  Note that some code in the
+ *  normal send_pkt fast I/O handler assumes that this is equal to 1. */
+#define __NETIO_SEND_FLG_ACK    0x1
+
+/** Do checksum on this packet.  (Only used with the __netio_send_cmd_t;
+ *  normal packet sends use a special fast I/O index to denote checksumming,
+ *  and multi-segment sends test the checksum descriptor.) */
+#define __NETIO_SEND_FLG_CSUM   0x2
+
+/** Get a completion on this packet.  Only used with multi-segment sends.  */
+#define __NETIO_SEND_FLG_COMPLETION 0x4
+
+/** Position of the number-of-extra-segments value in the flags word.
+    Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_XSEG_SHIFT 3
+
+/** Width of the number-of-extra-segments value in the flags word. */
+#define __NETIO_SEND_FLG_XSEG_WIDTH 2
+
+#endif /* __DRV_XGBE_IMPL_H__ */