Merge 4.2-rc6 into usb-next

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/dma/apm-xgene-dma.txt

@@ -35,7 +35,7 @@ Example:
 			device_type = "dma";
 			reg = <0x0 0x1f270000 0x0 0x10000>,
 			      <0x0 0x1f200000 0x0 0x10000>,
-			      <0x0 0x1b008000 0x0 0x2000>,
+			      <0x0 0x1b000000 0x0 0x400000>,
 			      <0x0 0x1054a000 0x0 0x100>;
 			interrupts = <0x0 0x82 0x4>,
 				     <0x0 0xb8 0x4>,

Documentation/devicetree/bindings/phy/ti-phy.txt

@@ -82,6 +82,9 @@ Optional properties:
  - id: If there are multiple instance of the same type, in order to
    differentiate between each instance "id" can be used (e.g., multi-lane PCIe
    PHY). If "id" is not provided, it is set to default value of '1'.
+ - syscon-pllreset: Handle to system control region that contains the
+   CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
+   register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
 
 This is usually a subnode of ocp2scp to which it is connected.
 
@@ -100,3 +103,16 @@ usb3phy@4a084400 {
 			"sysclk",
 			"refclk";
 };
+
+sata_phy: phy@4A096000 {
+	compatible = "ti,phy-pipe3-sata";
+	reg = <0x4A096000 0x80>, /* phy_rx */
+	      <0x4A096400 0x64>, /* phy_tx */
+	      <0x4A096800 0x40>; /* pll_ctrl */
+	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+	ctrl-module = <&omap_control_sata>;
+	clocks = <&sys_clkin1>, <&sata_ref_clk>;
+	clock-names = "sysclk", "refclk";
+	syscon-pllreset = <&scm_conf 0x3fc>;
+	#phy-cells = <0>;
+};

Documentation/devicetree/bindings/sound/mt8173-max98090.txt

@@ -3,11 +3,13 @@ MT8173 with MAX98090 CODEC
 Required properties:
 - compatible : "mediatek,mt8173-max98090"
 - mediatek,audio-codec: the phandle of the MAX98090 audio codec
+- mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-max98090";
 		mediatek,audio-codec = <&max98090>;
+		mediatek,platform = <&afe>;
 	};
 

Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt

@@ -3,11 +3,13 @@ MT8173 with RT5650 RT5676 CODECS
 Required properties:
 - compatible : "mediatek,mt8173-rt5650-rt5676"
 - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs
+- mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650-rt5676";
 		mediatek,audio-codec = <&rt5650 &rt5676>;
+		mediatek,platform = <&afe>;
 	};
 

Documentation/devicetree/bindings/spi/spi-ath79.txt

@@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller
 Required properties:
 - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
 - reg: Base address and size of the controllers memory area
-- clocks: phandle to the AHB clock.
+- clocks: phandle of the AHB clock.
 - clock-names: has to be "ahb".
 - #address-cells: <1>, as required by generic SPI binding.
 - #size-cells: <0>, also as required by generic SPI binding.
@@ -12,9 +12,9 @@ Child nodes as per the generic SPI binding.
 
 Example:
 
-	spi@1F000000 {
+	spi@1f000000 {
 		compatible = "qca,ar9132-spi", "qca,ar7100-spi";
-		reg = <0x1F000000 0x10>;
+		reg = <0x1f000000 0x10>;
 
 		clocks = <&pll 2>;
 		clock-names = "ahb";

Documentation/hwmon/nct7904

@@ -35,11 +35,11 @@ temp1_input		Local temperature (1/1000 degree,
 temp[2-9]_input		CPU temperatures (1/1000 degree,
 			0.125 degree resolution)
 
-fan[1-4]_mode		R/W, 0/1 for manual or SmartFan mode
+pwm[1-4]_enable		R/W, 1/2 for manual or SmartFan mode
 			Setting SmartFan mode is supported only if it has been
 			previously configured by BIOS (or configuration EEPROM)
 
-fan[1-4]_pwm		R/O in SmartFan mode, R/W in manual control mode
+pwm[1-4]		R/O in SmartFan mode, R/W in manual control mode
 
 The driver checks sensor control registers and does not export the sensors
 that are not enabled. Anyway, a sensor that is enabled may actually be not

Documentation/input/alps.txt

@@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2
  byte 5:  0   z6   z5   z4   z3   z2   z1   z0
 
 Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
-the DualPoint Stick. For non interleaved dualpoint devices the pointingstick
-buttons get reported separately in the PSM, PSR and PSL bits.
+the DualPoint Stick. The M, R and L bits signal the combined status of both
+the pointingstick and touchpad buttons, except for Dell dualpoint devices
+where the pointingstick buttons get reported separately in the PSM, PSR
+and PSL bits.
 
 Dualpoint device -- interleaved packet format
 ---------------------------------------------

Documentation/target/tcm_mod_builder.py

@@ -199,7 +199,8 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "#include <linux/string.h>\n"
 	buf += "#include <linux/configfs.h>\n"
 	buf += "#include <linux/ctype.h>\n"
-	buf += "#include <asm/unaligned.h>\n\n"
+	buf += "#include <asm/unaligned.h>\n"
+	buf += "#include <scsi/scsi_proto.h>\n\n"
 	buf += "#include <target/target_core_base.h>\n"
 	buf += "#include <target/target_core_fabric.h>\n"
 	buf += "#include <target/target_core_fabric_configfs.h>\n"
@@ -230,8 +231,14 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	}\n"
 	buf += "	tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n"
 	buf += "	tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n"
-	buf += "	ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n"
-	buf += "				&tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+
+	if proto_ident == "FC":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);\n"
+	elif proto_ident == "SAS":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+	elif proto_ident == "iSCSI":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_ISCSI);\n"
+
 	buf += "	if (ret < 0) {\n"
 	buf += "		kfree(tpg);\n"
 	buf += "		return NULL;\n"
@@ -292,7 +299,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 
 	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n"
 	buf += "	.module				= THIS_MODULE,\n"
-	buf += "	.name				= " + fabric_mod_name + ",\n"
+	buf += "	.name				= \"" + fabric_mod_name + "\",\n"
 	buf += "	.get_fabric_name		= " + fabric_mod_name + "_get_fabric_name,\n"
 	buf += "	.tpg_get_wwn			= " + fabric_mod_name + "_get_fabric_wwn,\n"
 	buf += "	.tpg_get_tag			= " + fabric_mod_name + "_get_tag,\n"
@@ -322,17 +329,17 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.fabric_make_tpg		= " + fabric_mod_name + "_make_tpg,\n"
 	buf += "	.fabric_drop_tpg		= " + fabric_mod_name + "_drop_tpg,\n"
 	buf += "\n"
-	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs;\n"
+	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs,\n"
 	buf += "};\n\n"
 
 	buf += "static int __init " + fabric_mod_name + "_init(void)\n"
 	buf += "{\n"
-	buf += "	return target_register_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	return target_register_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "static void __exit " + fabric_mod_name + "_exit(void)\n"
 	buf += "{\n"
-	buf += "	target_unregister_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	target_unregister_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n"

MAINTAINERS

@@ -5600,6 +5600,7 @@ F:	kernel/irq/
 IRQCHIP DRIVERS
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Jason Cooper <jason@lakedaemon.net>
+M:	Marc Zyngier <marc.zyngier@arm.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
@@ -5608,11 +5609,14 @@ F:	Documentation/devicetree/bindings/interrupt-controller/
 F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
-M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M:	Jiang Liu <jiang.liu@linux.intel.com>
+M:	Marc Zyngier <marc.zyngier@arm.com>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	Documentation/IRQ-domain.txt
 F:	include/linux/irqdomain.h
 F:	kernel/irq/irqdomain.c
+F:	kernel/irq/msi.c
 
 ISAPNP
 M:	Jaroslav Kysela <perex@perex.cz>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*
@@ -597,6 +597,11 @@ endif # $(dot-config)
 # Defaults to vmlinux, but the arch makefile usually adds further targets
 all: vmlinux
 
+# The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
+# values of the respective KBUILD_* variables
+ARCH_CPPFLAGS :=
+ARCH_AFLAGS :=
+ARCH_CFLAGS :=
 include arch/$(SRCARCH)/Makefile
 
 KBUILD_CFLAGS	+= $(call cc-option,-fno-delete-null-pointer-checks,)
@@ -848,10 +853,10 @@ export mod_strip_cmd
 mod_compress_cmd = true
 ifdef CONFIG_MODULE_COMPRESS
   ifdef CONFIG_MODULE_COMPRESS_GZIP
-    mod_compress_cmd = gzip -n
+    mod_compress_cmd = gzip -n -f
   endif # CONFIG_MODULE_COMPRESS_GZIP
   ifdef CONFIG_MODULE_COMPRESS_XZ
-    mod_compress_cmd = xz
+    mod_compress_cmd = xz -f
   endif # CONFIG_MODULE_COMPRESS_XZ
 endif # CONFIG_MODULE_COMPRESS
 export mod_compress_cmd

arch/arc/Kconfig

@@ -313,11 +313,11 @@ config ARC_PAGE_SIZE_8K
 
 config ARC_PAGE_SIZE_16K
 	bool "16KB"
-	depends on ARC_MMU_V3
+	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on ARC_MMU_V3
+	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 endchoice
 
@@ -365,6 +365,11 @@ config ARC_HAS_LLSC
 	default y
 	depends on !ARC_CANT_LLSC
 
+config ARC_STAR_9000923308
+	bool "Workaround for llock/scond livelock"
+	default y
+	depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
+
 config ARC_HAS_SWAPE
 	bool "Insn: SWAPE (endian-swap)"
 	default y
@@ -379,6 +384,10 @@ config ARC_HAS_LL64
 	  dest operands with 2 possible source operands.
 	default y
 
+config ARC_HAS_DIV_REM
+	bool "Insn: div, divu, rem, remu"
+	default y
+
 config ARC_HAS_RTC
 	bool "Local 64-bit r/o cycle counter"
 	default n

arch/arc/Makefile

@@ -36,8 +36,16 @@ cflags-$(atleast_gcc44)			+= -fsection-anchors
 cflags-$(CONFIG_ARC_HAS_LLSC)		+= -mlock
 cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
 
+ifdef CONFIG_ISA_ARCV2
+
 ifndef CONFIG_ARC_HAS_LL64
-cflags-$(CONFIG_ISA_ARCV2)		+= -mno-ll64
+cflags-y				+= -mno-ll64
+endif
+
+ifndef CONFIG_ARC_HAS_DIV_REM
+cflags-y				+= -mno-div-rem
+endif
+
 endif
 
 cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables

arch/arc/include/asm/arcregs.h

@@ -89,11 +89,10 @@
 #define ECR_C_BIT_DTLB_LD_MISS		8
 #define ECR_C_BIT_DTLB_ST_MISS		9
 
-
 /* Auxiliary registers */
 #define AUX_IDENTITY		4
 #define AUX_INTR_VEC_BASE	0x25
-
+#define AUX_NON_VOL		0x5e
 
 /*
  * Floating Pt Registers
@@ -240,9 +239,9 @@ struct bcr_extn_xymem {
 
 struct bcr_perip {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int start:8, pad2:8, sz:8, pad:8;
+	unsigned int start:8, pad2:8, sz:8, ver:8;
 #else
-	unsigned int pad:8, sz:8, pad2:8, start:8;
+	unsigned int ver:8, sz:8, pad2:8, start:8;
 #endif
 };