Merge remote-tracking branches 'asoc/topic/fsl', 'asoc/topic/fsl-asrc…

…', 'asoc/topic/fsl-spdif' and 'asoc/topic/imx-audmux' into asoc-next

Documentation/devicetree/bindings/sound/fsl,asrc.txt

@@ -0,0 +1,60 @@
+Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
+signal associated with an input clock into a signal associated with a different
+output clock. The driver currently works as a Front End of DPCM with other Back
+Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
+three substreams within totally 10 channels.
+
+Required properties:
+
+  - compatible		: Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
+
+  - reg			: Offset and length of the register set for the device.
+
+  - interrupts		: Contains the spdif interrupt.
+
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
+
+  - clocks		: Contains an entry for each entry in clock-names.
+
+  - clock-names		: Contains the following entries
+	"mem"		  Peripheral access clock to access registers.
+	"ipg"		  Peripheral clock to driver module.
+	"asrck_<0-f>"	  Clock sources for input and output clock.
+
+   - big-endian		: If this property is absent, the little endian mode
+			  will be in use as default. Otherwise, the big endian
+			  mode will be in use for all the device registers.
+
+   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
+
+   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
+
+Example:
+
+asrc: asrc@02034000 {
+	compatible = "fsl,imx53-asrc";
+	reg = <0x02034000 0x4000>;
+	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 107>, <&clks 0>, <&clks 0>;
+	clock-names = "mem", "ipg", "asrck0",
+		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+		"asrck_d", "asrck_e", "asrck_f";
+	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+	dma-names = "rxa", "rxb", "rxc",
+		"txa", "txb", "txc";
+	fsl,asrc-rate  = <48000>;
+	fsl,asrc-width = <16>;
+	status = "okay";
+};

include/linux/platform_data/dma-imx.h

@@ -50,6 +50,7 @@ enum imx_dma_prio {
 
 struct imx_dma_data {
 	int dma_request; /* DMA request line */
+	int dma_request2; /* secondary DMA request line */
 	enum sdma_peripheral_type peripheral_type;
 	int priority;
 };

sound/soc/fsl/Kconfig

@@ -2,9 +2,20 @@ menu "SoC Audio for Freescale CPUs"
 
 comment "Common SoC Audio options for Freescale CPUs:"
 
+config SND_SOC_FSL_ASRC
+	tristate "Asynchronous Sample Rate Converter (ASRC) module support"
+	select REGMAP_MMIO
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y if you want to add Asynchronous Sample Rate Converter (ASRC)
+	  support for the Freescale CPUs.
+	  This option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
 config SND_SOC_FSL_SAI
 	tristate "Synchronous Audio Interface (SAI) module support"
 	select REGMAP_MMIO
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 	help
 	  Say Y if you want to add Synchronous Audio Interface (SAI)
@@ -15,7 +26,7 @@ config SND_SOC_FSL_SAI
 config SND_SOC_FSL_SSI
 	tristate "Synchronous Serial Interface module support"
 	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
-	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && ARCH_MXC
+	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC)
 	select REGMAP_MMIO
 	help
 	  Say Y if you want to add Synchronous Serial Interface (SSI)
@@ -27,7 +38,7 @@ config SND_SOC_FSL_SPDIF
 	tristate "Sony/Philips Digital Interface module support"
 	select REGMAP_MMIO
 	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
-	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && ARCH_MXC
+	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC)
 	help
 	  Say Y if you want to add Sony/Philips Digital Interface (SPDIF)
 	  support for the Freescale CPUs.
@@ -37,6 +48,7 @@ config SND_SOC_FSL_SPDIF
 config SND_SOC_FSL_ESAI
 	tristate "Enhanced Serial Audio Interface (ESAI) module support"
 	select REGMAP_MMIO
+	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
 	select SND_SOC_FSL_UTILS
 	help
 	  Say Y if you want to add Enhanced Synchronous Audio Interface

sound/soc/fsl/Makefile

@@ -11,13 +11,15 @@ snd-soc-p1022-rdk-objs := p1022_rdk.o
 obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o
 
 # Freescale SSI/DMA/SAI/SPDIF Support
+snd-soc-fsl-asrc-objs := fsl_asrc.o fsl_asrc_dma.o
 snd-soc-fsl-sai-objs := fsl_sai.o
 snd-soc-fsl-ssi-y := fsl_ssi.o
 snd-soc-fsl-ssi-$(CONFIG_DEBUG_FS) += fsl_ssi_dbg.o
 snd-soc-fsl-spdif-objs := fsl_spdif.o
 snd-soc-fsl-esai-objs := fsl_esai.o
 snd-soc-fsl-utils-objs := fsl_utils.o
 snd-soc-fsl-dma-objs := fsl_dma.o
+obj-$(CONFIG_SND_SOC_FSL_ASRC) += snd-soc-fsl-asrc.o
 obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o
 obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o
 obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o