ARM: cns3xxx: remove entire platform

cns3xxx was marked as unused a while ago, and gets removed
entirely now.

Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -2048,11 +2048,6 @@ F:	arch/arm/boot/dts/ecx-*.dts*
 F:	arch/arm/boot/dts/highbank.dts
 F:	arch/arm/mach-highbank/
 
-ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
-M:	Krzysztof Halasa <khalasa@piap.pl>
-S:	Maintained
-F:	arch/arm/mach-cns3xxx/
-
 ARM/CAVIUM THUNDER NETWORK DRIVER
 M:	Sunil Goutham <sgoutham@marvell.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/Kconfig

@@ -438,8 +438,6 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-digicolor/Kconfig"

arch/arm/Kconfig.debug

@@ -307,14 +307,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -1685,7 +1677,6 @@ config DEBUG_UART_PHYS
 				DEBUG_S3C2410_UART1)
 	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
 				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1818,7 +1809,6 @@ config DEBUG_UART_VIRT
 				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
 	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb020000 if DEBUG_OMAP3UART3

arch/arm/Makefile

@@ -178,7 +178,6 @@ machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove