Skip to content

Commit

Permalink
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel…
Browse files Browse the repository at this point in the history 
…/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "The majority of the fixes this time are for OMAP hardware, here is a
  breakdown of the significant changes:

  Various device tree bug fixes:
   - TI am57xx boards need a voltage level fix to avoid damaging SD
     cards
   - vf610-bk4 fails to detect its flash due to an incorrect description
   - meson-g12a USB phy configuration fails
   - meson-g12b reboot should not power off the SD card
   - Some corrections for apparently harmless differences from the
     documentation.

  Regression fixes:
   - ams-delta FIQ interrupts broke in 5.3
   - TI am3/am4 mmc controllers broke in 5.2

  The logic_pio driver (used on some Huawei ARM servers) got a few bug
  fixes for reliability.

  And a couple of compile-time warning fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
  soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
  soc: ti: pm33xx: Make two symbols static
  soc: ti: pm33xx: Fix static checker warnings
  ARM: OMAP: dma: Mark expected switch fall-throughs
  ARM: dts: Fix incomplete dts data for am3 and am4 mmc
  bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
  ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  ARM: dts: dra74x: Fix iodelay configuration for mmc3
  ARM: dts: am335x: Fix UARTs length
  ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  bus: hisi_lpc: Add .remove method to avoid driver unbind crash
  bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
  lib: logic_pio: Add logic_pio_unregister_range()
  lib: logic_pio: Avoid possible overlap for unregistering regions
  lib: logic_pio: Fix RCU usage
  arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
  arm64: dts: meson-g12a-sei510: enable IR controller
  arm64: dts: meson-g12a: add missing dwc2 phy-names
  ARM: dts: vf610-bk4: Fix qspi node description
  ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
  ...
  • Loading branch information
Linus Torvalds committed Aug 30, 2019
2 parents 8fb8e9e + 7a6c9db commit e8d6766
Show file tree
Hide file tree
Showing 29 changed files with 250 additions and 135 deletions.
2 changes: 2 additions & 0 deletions .mailmap
View file
Original file line number Diff line number Diff line change
Expand Up @@ -160,6 +160,8 @@ Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.co
Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
Matt Redfearn <matt.redfearn@mips.com> <matt.redfearn@imgtec.com>
Maxime Ripard <mripard@kernel.org> <maxime.ripard@bootlin.com>
Maxime Ripard <mripard@kernel.org> <maxime.ripard@free-electrons.com>
Mayuresh Janorkar <mayur@ti.com>
Michael Buesch <m@bues.ch>
Michel Dänzer <michel@tungstengraphics.com>
Expand Down
10 changes: 5 additions & 5 deletions MAINTAINERS
View file
Original file line number Diff line number Diff line change
Expand Up @@ -683,7 +683,7 @@ S: Maintained
F: drivers/crypto/sunxi-ss/

ALLWINNER VPU DRIVER
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
M: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
L: linux-media@vger.kernel.org
S: Maintained
Expand Down Expand Up @@ -1408,7 +1408,7 @@ S: Maintained
F: drivers/clk/sunxi/

ARM/Allwinner sunXi SoC support
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
Expand Down Expand Up @@ -3577,7 +3577,7 @@ F: Documentation/filesystems/caching/cachefiles.txt
F: fs/cachefiles/

CADENCE MIPI-CSI2 BRIDGES
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/media/cdns,*.txt
Expand Down Expand Up @@ -5295,7 +5295,7 @@ F: include/linux/vga*

DRM DRIVERS AND MISC GPU PATCHES
M: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
M: Sean Paul <sean@poorly.run>
W: https://01.org/linuxgraphics/gfx-docs/maintainer-tools/drm-misc.html
S: Maintained
Expand All @@ -5308,7 +5308,7 @@ F: include/uapi/drm/drm*
F: include/linux/vga*

DRM DRIVERS FOR ALLWINNER A10
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
L: dri-devel@lists.freedesktop.org
S: Supported
F: drivers/gpu/drm/sun4i/
Expand Down
16 changes: 10 additions & 6 deletions arch/arm/boot/dts/am33xx-l4.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -185,7 +185,7 @@
uart0: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <72>;
status = "disabled";
dmas = <&edma 26 0>, <&edma 27 0>;
Expand Down Expand Up @@ -934,7 +934,7 @@
uart1: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <73>;
status = "disabled";
dmas = <&edma 28 0>, <&edma 29 0>;
Expand Down Expand Up @@ -966,7 +966,7 @@
uart2: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <74>;
status = "disabled";
dmas = <&edma 30 0>, <&edma 31 0>;
Expand Down Expand Up @@ -1614,7 +1614,7 @@
uart3: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <44>;
status = "disabled";
};
Expand Down Expand Up @@ -1644,7 +1644,7 @@
uart4: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <45>;
status = "disabled";
};
Expand Down Expand Up @@ -1674,7 +1674,7 @@
uart5: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <46>;
status = "disabled";
};
Expand Down Expand Up @@ -1758,6 +1758,8 @@

target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xcc020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
Expand All @@ -1780,6 +1782,8 @@

target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xd0020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
Expand Down
32 changes: 26 additions & 6 deletions arch/arm/boot/dts/am33xx.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -234,13 +234,33 @@
interrupt-names = "edma3_tcerrint";
};

mmc3: mmc@47810000 {
compatible = "ti,omap4-hsmmc";
target-module@47810000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
ti,needs-special-reset;
interrupts = <29>;
reg = <0x47810000 0x1000>;
status = "disabled";
reg = <0x478102fc 0x4>,
<0x47810110 0x4>,
<0x47810114 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47810000 0x1000>;

mmc3: mmc@0 {
compatible = "ti,omap4-hsmmc";
ti,needs-special-reset;
interrupts = <29>;
reg = <0x0 0x1000>;
};
};

usb: usb@47400000 {
Expand Down
32 changes: 26 additions & 6 deletions arch/arm/boot/dts/am4372.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -228,13 +228,33 @@
interrupt-names = "edma3_tcerrint";
};

mmc3: mmc@47810000 {
compatible = "ti,omap4-hsmmc";
reg = <0x47810000 0x1000>;
target-module@47810000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
ti,needs-special-reset;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
reg = <0x478102fc 0x4>,
<0x47810110 0x4>,
<0x47810114 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47810000 0x1000>;

mmc3: mmc@0 {
compatible = "ti,omap4-hsmmc";
ti,needs-special-reset;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0x1000>;
};
};

sham: sham@53100000 {
Expand Down
4 changes: 4 additions & 0 deletions arch/arm/boot/dts/am437x-l4.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1574,6 +1574,8 @@

target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xcc020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
Expand All @@ -1593,6 +1595,8 @@

target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xd0020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
Expand Down
7 changes: 1 addition & 6 deletions arch/arm/boot/dts/am571x-idk.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -175,14 +175,9 @@
};

&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};

&mmc2 {
Expand Down
7 changes: 1 addition & 6 deletions arch/arm/boot/dts/am572x-idk.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -16,14 +16,9 @@
};

&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};

&mmc2 {
Expand Down
7 changes: 1 addition & 6 deletions arch/arm/boot/dts/am574x-idk.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,14 +24,9 @@
};

&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_default>;
pinctrl-3 = <&mmc1_pins_hs>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
};

&mmc2 {
Expand Down
3 changes: 2 additions & 1 deletion arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -379,7 +379,7 @@
};
};

&gpio7 {
&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
Expand Down Expand Up @@ -430,6 +430,7 @@

bus-width = <4>;
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
no-1-8-v;
};

&mmc2 {
Expand Down
7 changes: 1 addition & 6 deletions arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -16,14 +16,9 @@
};

&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};
Expand Down
7 changes: 1 addition & 6 deletions arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -16,14 +16,9 @@
};

&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};
Expand Down
2 changes: 1 addition & 1 deletion arch/arm/boot/dts/dra7-evm.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -498,7 +498,7 @@
phy-supply = <&ldousb_reg>;
};

&gpio7 {
&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
Expand Down
6 changes: 3 additions & 3 deletions arch/arm/boot/dts/dra7-l4.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1261,7 +1261,7 @@
};
};

target-module@51000 { /* 0x48051000, ap 45 2e.0 */
gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio7";
reg = <0x51000 0x4>,
Expand Down Expand Up @@ -3025,7 +3025,7 @@

target-module@80000 { /* 0x48480000, ap 31 16.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x80000 0x4>;
reg = <0x80020 0x4>;
reg-names = "rev";
clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
clock-names = "fck";
Expand Down Expand Up @@ -4577,7 +4577,7 @@

target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xc000 0x4>;
reg = <0xc020 0x4>;
reg-names = "rev";
clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
clock-names = "fck";
Expand Down
Loading

0 comments on commit e8d6766

Please sign in to comment.