Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', …

…'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next

Documentation/admin-guide/kernel-parameters.txt

@@ -1732,6 +1732,11 @@
 			Note that using this option lowers the security
 			provided by tboot because it makes the system
 			vulnerable to DMA attacks.
+		nobounce [Default off]
+			Disable bounce buffer for unstrusted devices such as
+			the Thunderbolt devices. This will treat the untrusted
+			devices as the trusted ones, hence might expose security
+			risks of DMA attacks.
 
 	intel_idle.max_cstate=	[KNL,HW,ACPI,X86]
 			0	disables intel_idle and fall back on acpi_idle.
@@ -1811,7 +1816,7 @@
 			  synchronously.
 
 	iommu.passthrough=
-			[ARM64] Configure DMA to bypass the IOMMU by default.
+			[ARM64, X86] Configure DMA to bypass the IOMMU by default.
 			Format: { "0" | "1" }
 			0 - Use IOMMU translation for DMA.
 			1 - Bypass the IOMMU for DMA.

Documentation/devicetree/bindings/iommu/mediatek,iommu.txt

@@ -11,10 +11,23 @@ ARM Short-Descriptor translation table format for address translation.
                |
               m4u (Multimedia Memory Management Unit)
                |
+          +--------+
+          |        |
+      gals0-rx   gals1-rx    (Global Async Local Sync rx)
+          |        |
+          |        |
+      gals0-tx   gals1-tx    (Global Async Local Sync tx)
+          |        |          Some SoCs may have GALS.
+          +--------+
+               |
            SMI Common(Smart Multimedia Interface Common)
                |
        +----------------+-------
        |                |
+       |             gals-rx        There may be GALS in some larbs.
+       |                |
+       |                |
+       |             gals-tx
        |                |
    SMI larb0        SMI larb1   ... SoCs have several SMI local arbiter(larb).
    (display)         (vdec)
@@ -36,6 +49,10 @@ each local arbiter.
 like display, video decode, and camera. And there are different ports
 in each larb. Take a example, There are many ports like MC, PP, VLD in the
 video decode local arbiter, all these ports are according to the video HW.
+  In some SoCs, there may be a GALS(Global Async Local Sync) module between
+smi-common and m4u, and additional GALS module between smi-larb and
+smi-common. GALS can been seen as a "asynchronous fifo" which could help
+synchronize for the modules in different clock frequency.
 
 Required properties:
 - compatible : must be one of the following string:
@@ -44,18 +61,25 @@ Required properties:
 	"mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
 						     generation one m4u HW.
 	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
+	"mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW.
 - reg : m4u register base and size.
 - interrupts : the interrupt of m4u.
 - clocks : must contain one entry for each clock-names.
-- clock-names : must be "bclk", It is the block clock of m4u.
+- clock-names : Only 1 optional clock:
+  - "bclk": the block clock of m4u.
+  Here is the list which require this "bclk":
+  - mt2701, mt2712, mt7623 and mt8173.
+  Note that m4u use the EMI clock which always has been enabled before kernel
+  if there is no this "bclk".
 - mediatek,larbs : List of phandle to the local arbiters in the current Socs.
 	Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort
 	according to the local arbiter index, like larb0, larb1, larb2...
 - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
 	Specifies the mtk_m4u_id as defined in
 	dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
-	dt-binding/memory/mt2712-larb-port.h for mt2712, and
-	dt-binding/memory/mt8173-larb-port.h for mt8173.
+	dt-binding/memory/mt2712-larb-port.h for mt2712,
+	dt-binding/memory/mt8173-larb-port.h for mt8173, and
+	dt-binding/memory/mt8183-larb-port.h for mt8183.
 
 Example:
 	iommu: iommu@10205000 {

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt

@@ -2,9 +2,10 @@ SMI (Smart Multimedia Interface) Common
 
 The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 
-Mediatek SMI have two generations of HW architecture, mt2712 and mt8173 use
-the second generation of SMI HW while mt2701 uses the first generation HW of
-SMI.
+Mediatek SMI have two generations of HW architecture, here is the list
+which generation the SoCs use:
+generation 1: mt2701 and mt7623.
+generation 2: mt2712, mt8173 and mt8183.
 
 There's slight differences between the two SMI, for generation 2, the
 register which control the iommu port is at each larb's register base. But
@@ -19,6 +20,7 @@ Required properties:
 	"mediatek,mt2712-smi-common"
 	"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
 	"mediatek,mt8173-smi-common"
+	"mediatek,mt8183-smi-common"
 - reg : the register and size of the SMI block.
 - power-domains : a phandle to the power domain of this local arbiter.
 - clocks : Must contain an entry for each entry in clock-names.
@@ -30,6 +32,10 @@ Required properties:
 	    They may be the same if both source clocks are the same.
   - "async" : asynchronous clock, it help transform the smi clock into the emi
 	      clock domain, this clock is only needed by generation 1 smi HW.
+  and these 2 option clocks for generation 2 smi HW:
+  - "gals0": the path0 clock of GALS(Global Async Local Sync).
+  - "gals1": the path1 clock of GALS(Global Async Local Sync).
+  Here is the list which has this GALS: mt8183.
 
 Example:
 	smi_common: smi@14022000 {

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt

@@ -8,6 +8,7 @@ Required properties:
 		"mediatek,mt2712-smi-larb"
 		"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
 		"mediatek,mt8173-smi-larb"
+		"mediatek,mt8183-smi-larb"
 - reg : the register and size of this local arbiter.
 - mediatek,smi : a phandle to the smi_common node.
 - power-domains : a phandle to the power domain of this local arbiter.
@@ -16,6 +17,9 @@ Required properties:
   - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
 	    the register.
   - "smi" : It's the clock for transfer data and command.
+  and this optional clock name:
+  - "gals": the clock for GALS(Global Async Local Sync).
+  Here is the list which has this GALS: mt8183.
 
 Required property for mt2701, mt2712 and mt7623:
 - mediatek,larb-id :the hardware id of this larb.

MAINTAINERS

@@ -1350,8 +1350,7 @@ M:	Will Deacon <will@kernel.org>
 R:	Robin Murphy <robin.murphy@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/iommu/arm-smmu.c
-F:	drivers/iommu/arm-smmu-v3.c
+F:	drivers/iommu/arm-smmu*
 F:	drivers/iommu/io-pgtable-arm.c
 F:	drivers/iommu/io-pgtable-arm-v7s.c
 

arch/arm/mach-omap2/Makefile

@@ -229,3 +229,5 @@ include/generated/ti-pm-asm-offsets.h: arch/arm/mach-omap2/pm-asm-offsets.s FORC
 $(obj)/sleep33xx.o $(obj)/sleep43xx.o: include/generated/ti-pm-asm-offsets.h
 
 targets += pm-asm-offsets.s
+
+obj-$(CONFIG_OMAP_IOMMU)		+= omap-iommu.o

arch/arm/mach-omap2/omap-iommu.c

@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP IOMMU quirks for various TI SoCs
+ *
+ * Copyright (C) 2015-2019 Texas Instruments Incorporated - http://www.ti.com/
+ *      Suman Anna <s-anna@ti.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/err.h>
+
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "powerdomain.h"
+
+int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
+				    u8 *pwrst)
+{
+	struct powerdomain *pwrdm;
+	struct omap_device *od;
+	u8 next_pwrst;
+
+	od = to_omap_device(pdev);
+	if (!od)
+		return -ENODEV;
+
+	if (od->hwmods_cnt != 1)
+		return -EINVAL;
+
+	pwrdm = omap_hwmod_get_pwrdm(od->hwmods[0]);
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (request)
+		*pwrst = pwrdm_read_next_pwrst(pwrdm);
+
+	if (*pwrst > PWRDM_POWER_RET)
+		return 0;
+
+	next_pwrst = request ? PWRDM_POWER_ON : *pwrst;
+
+	return pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+}

arch/ia64/include/asm/iommu.h

@@ -8,10 +8,8 @@
 extern void no_iommu_init(void);
 #ifdef	CONFIG_INTEL_IOMMU
 extern int force_iommu, no_iommu;
-extern int iommu_pass_through;
 extern int iommu_detected;
 #else
-#define iommu_pass_through	(0)
 #define no_iommu		(1)
 #define iommu_detected		(0)
 #endif

arch/ia64/kernel/pci-dma.c

@@ -22,8 +22,6 @@ int force_iommu __read_mostly = 1;
 int force_iommu __read_mostly;
 #endif
 
-int iommu_pass_through;
-
 static int __init pci_iommu_init(void)
 {
 	if (iommu_detected)

arch/x86/include/asm/iommu.h

@@ -4,7 +4,6 @@
 
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
-extern int iommu_pass_through;
 
 /* 10 seconds */
 #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)

arch/x86/kernel/pci-dma.c

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/dma-direct.h>
 #include <linux/dma-debug.h>
+#include <linux/iommu.h>
 #include <linux/dmar.h>
 #include <linux/export.h>
 #include <linux/memblock.h>
@@ -34,21 +35,6 @@ int no_iommu __read_mostly;
 /* Set this to 1 if there is a HW IOMMU in the system */
 int iommu_detected __read_mostly = 0;
 
-/*
- * This variable becomes 1 if iommu=pt is passed on the kernel command line.
- * If this variable is 1, IOMMU implementations do no DMA translation for
- * devices and allow every device to access to whole physical memory. This is
- * useful if a user wants to use an IOMMU only for KVM device assignment to
- * guests and not for driver dma translation.
- * It is also possible to disable by default in kernel config, and enable with
- * iommu=nopt at boot time.
- */
-#ifdef CONFIG_IOMMU_DEFAULT_PASSTHROUGH
-int iommu_pass_through __read_mostly = 1;
-#else
-int iommu_pass_through __read_mostly;
-#endif
-
 extern struct iommu_table_entry __iommu_table[], __iommu_table_end[];
 
 void __init pci_iommu_alloc(void)
@@ -120,9 +106,9 @@ static __init int iommu_setup(char *p)
 			swiotlb = 1;
 #endif
 		if (!strncmp(p, "pt", 2))
-			iommu_pass_through = 1;
+			iommu_set_default_passthrough(true);
 		if (!strncmp(p, "nopt", 4))
-			iommu_pass_through = 0;
+			iommu_set_default_translated(true);
 
 		gart_parse_options(p);
 

drivers/gpu/drm/panfrost/panfrost_mmu.c

@@ -222,7 +222,7 @@ void panfrost_mmu_unmap(struct panfrost_gem_object *bo)
 		size_t unmapped_page;
 		size_t pgsize = get_pgsize(iova, len - unmapped_len);
 
-		unmapped_page = ops->unmap(ops, iova, pgsize);
+		unmapped_page = ops->unmap(ops, iova, pgsize, NULL);
 		if (!unmapped_page)
 			break;
 
@@ -247,20 +247,28 @@ static void mmu_tlb_inv_context_s1(void *cookie)
 	mmu_hw_do_operation(pfdev, 0, 0, ~0UL, AS_COMMAND_FLUSH_MEM);
 }
 
-static void mmu_tlb_inv_range_nosync(unsigned long iova, size_t size,
-				     size_t granule, bool leaf, void *cookie)
-{}
-
 static void mmu_tlb_sync_context(void *cookie)
 {
 	//struct panfrost_device *pfdev = cookie;
 	// TODO: Wait 1000 GPU cycles for HW_ISSUE_6367/T60X
 }
 
-static const struct iommu_gather_ops mmu_tlb_ops = {
+static void mmu_tlb_flush_walk(unsigned long iova, size_t size, size_t granule,
+			       void *cookie)
+{
+	mmu_tlb_sync_context(cookie);
+}
+
+static void mmu_tlb_flush_leaf(unsigned long iova, size_t size, size_t granule,
+			       void *cookie)
+{
+	mmu_tlb_sync_context(cookie);
+}
+
+static const struct iommu_flush_ops mmu_tlb_ops = {
 	.tlb_flush_all	= mmu_tlb_inv_context_s1,
-	.tlb_add_flush	= mmu_tlb_inv_range_nosync,
-	.tlb_sync	= mmu_tlb_sync_context,
+	.tlb_flush_walk = mmu_tlb_flush_walk,
+	.tlb_flush_leaf = mmu_tlb_flush_leaf,
 };
 
 static const char *access_type_name(struct panfrost_device *pfdev,

drivers/iommu/Kconfig

@@ -182,6 +182,7 @@ config INTEL_IOMMU
 	select IOMMU_IOVA
 	select NEED_DMA_MAP_STATE
 	select DMAR_TABLE
+	select SWIOTLB
 	help
 	  DMA remapping (DMAR) devices support enables independent address
 	  translations for Direct Memory Access (DMA) from devices.

drivers/iommu/Makefile

@@ -10,13 +10,14 @@ obj-$(CONFIG_IOMMU_IO_PGTABLE_LPAE) += io-pgtable-arm.o
 obj-$(CONFIG_IOMMU_IOVA) += iova.o
 obj-$(CONFIG_OF_IOMMU)	+= of_iommu.o
 obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o
-obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o amd_iommu_init.o
+obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o amd_iommu_init.o amd_iommu_quirks.o
 obj-$(CONFIG_AMD_IOMMU_DEBUGFS) += amd_iommu_debugfs.o
 obj-$(CONFIG_AMD_IOMMU_V2) += amd_iommu_v2.o
-obj-$(CONFIG_ARM_SMMU) += arm-smmu.o
+obj-$(CONFIG_ARM_SMMU) += arm-smmu.o arm-smmu-impl.o
 obj-$(CONFIG_ARM_SMMU_V3) += arm-smmu-v3.o
 obj-$(CONFIG_DMAR_TABLE) += dmar.o
 obj-$(CONFIG_INTEL_IOMMU) += intel-iommu.o intel-pasid.o
+obj-$(CONFIG_INTEL_IOMMU) += intel-trace.o
 obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += intel-iommu-debugfs.o
 obj-$(CONFIG_INTEL_IOMMU_SVM) += intel-svm.o
 obj-$(CONFIG_IPMMU_VMSA) += ipmmu-vmsa.o