powerpc: Enable OPTPROBES on PPC32

For that, create a 32 bits version of patch_imm64_load_insns()
and create a patch_imm_load_insns() which calls
patch_imm32_load_insns() on PPC32 and patch_imm64_load_insns()
on PPC64.

Adapt optprobes_head.S for PPC32. Use PPC_LL/PPC_STL macros instead
of raw ld/std, opt out things linked to paca and use stmw/lmw to
save/restore registers.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bad58c66859b2a475c0ad516b53164ae3b4853cd.1618927318.git.christophe.leroy@csgroup.eu

arch/powerpc/Kconfig

@@ -229,7 +229,7 @@ config PPC
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI				if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC64 && PPC_BOOK3S && SMP
-	select HAVE_OPTPROBES			if PPC64
+	select HAVE_OPTPROBES
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_EVENTS_NMI		if PPC64
 	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH

arch/powerpc/kernel/optprobes.c

@@ -141,11 +141,21 @@ void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
 	}
 }
 
+static void patch_imm32_load_insns(unsigned long val, int reg, kprobe_opcode_t *addr)
+{
+	patch_instruction((struct ppc_inst *)addr,
+			  ppc_inst(PPC_RAW_LIS(reg, IMM_H(val))));
+	addr++;
+
+	patch_instruction((struct ppc_inst *)addr,
+			  ppc_inst(PPC_RAW_ORI(reg, reg, IMM_L(val))));
+}
+
 /*
  * Generate instructions to load provided immediate 64-bit value
  * to register 'reg' and patch these instructions at 'addr'.
  */
-static void patch_imm64_load_insns(unsigned long val, int reg, kprobe_opcode_t *addr)
+static void patch_imm64_load_insns(unsigned long long val, int reg, kprobe_opcode_t *addr)
 {
 	/* lis reg,(op)@highest */
 	patch_instruction((struct ppc_inst *)addr,
@@ -177,6 +187,14 @@ static void patch_imm64_load_insns(unsigned long val, int reg, kprobe_opcode_t *
 				   ___PPC_RS(reg) | (val & 0xffff)));
 }
 
+static void patch_imm_load_insns(unsigned long val, int reg, kprobe_opcode_t *addr)
+{
+	if (IS_ENABLED(CONFIG_PPC64))
+		patch_imm64_load_insns(val, reg, addr);
+	else
+		patch_imm32_load_insns(val, reg, addr);
+}
+
 int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *p)
 {
 	struct ppc_inst branch_op_callback, branch_emulate_step, temp;
@@ -230,7 +248,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *p)
 	 * Fixup the template with instructions to:
 	 * 1. load the address of the actual probepoint
 	 */
-	patch_imm64_load_insns((unsigned long)op, 3, buff + TMPL_OP_IDX);
+	patch_imm_load_insns((unsigned long)op, 3, buff + TMPL_OP_IDX);
 
 	/*
 	 * 2. branch to optimized_callback() and emulate_step()
@@ -264,7 +282,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *p)
 	 * 3. load instruction to be emulated into relevant register, and
 	 */
 	temp = ppc_inst_read((struct ppc_inst *)p->ainsn.insn);
-	patch_imm64_load_insns(ppc_inst_as_ulong(temp), 4, buff + TMPL_INSN_IDX);
+	patch_imm_load_insns(ppc_inst_as_ulong(temp), 4, buff + TMPL_INSN_IDX);
 
 	/*
 	 * 4. branch back from trampoline

arch/powerpc/kernel/optprobes_head.S

@@ -9,6 +9,16 @@
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 
+#ifdef CONFIG_PPC64
+#define SAVE_30GPRS(base) SAVE_10GPRS(2,base); SAVE_10GPRS(12,base); SAVE_10GPRS(22,base)
+#define REST_30GPRS(base) REST_10GPRS(2,base); REST_10GPRS(12,base); REST_10GPRS(22,base)
+#define TEMPLATE_FOR_IMM_LOAD_INSNS	nop; nop; nop; nop; nop
+#else
+#define SAVE_30GPRS(base) stmw	r2, GPR2(base)
+#define REST_30GPRS(base) lmw	r2, GPR2(base)
+#define TEMPLATE_FOR_IMM_LOAD_INSNS	nop; nop; nop
+#endif
+
 #define	OPT_SLOT_SIZE	65536
 
 	.balign	4
@@ -30,51 +40,50 @@ optinsn_slot:
 	.global optprobe_template_entry
 optprobe_template_entry:
 	/* Create an in-memory pt_regs */
-	stdu	r1,-INT_FRAME_SIZE(r1)
+	PPC_STLU	r1,-INT_FRAME_SIZE(r1)
 	SAVE_GPR(0,r1)
 	/* Save the previous SP into stack */
 	addi	r0,r1,INT_FRAME_SIZE
-	std	r0,GPR1(r1)
-	SAVE_10GPRS(2,r1)
-	SAVE_10GPRS(12,r1)
-	SAVE_10GPRS(22,r1)
+	PPC_STL	r0,GPR1(r1)
+	SAVE_30GPRS(r1)
 	/* Save SPRS */
 	mfmsr	r5
-	std	r5,_MSR(r1)
+	PPC_STL	r5,_MSR(r1)
 	li	r5,0x700
-	std	r5,_TRAP(r1)
+	PPC_STL	r5,_TRAP(r1)
 	li	r5,0
-	std	r5,ORIG_GPR3(r1)
-	std	r5,RESULT(r1)
+	PPC_STL	r5,ORIG_GPR3(r1)
+	PPC_STL	r5,RESULT(r1)
 	mfctr	r5
-	std	r5,_CTR(r1)
+	PPC_STL	r5,_CTR(r1)
 	mflr	r5
-	std	r5,_LINK(r1)
+	PPC_STL	r5,_LINK(r1)
 	mfspr	r5,SPRN_XER
-	std	r5,_XER(r1)
+	PPC_STL	r5,_XER(r1)
 	mfcr	r5
-	std	r5,_CCR(r1)
+	PPC_STL	r5,_CCR(r1)
+#ifdef CONFIG_PPC64
 	lbz     r5,PACAIRQSOFTMASK(r13)
 	std     r5,SOFTE(r1)
+#endif
 
 	/*
 	 * We may get here from a module, so load the kernel TOC in r2.
 	 * The original TOC gets restored when pt_regs is restored
 	 * further below.
 	 */
+#ifdef CONFIG_PPC64
 	ld	r2,PACATOC(r13)
+#endif
 
 	.global optprobe_template_op_address
 optprobe_template_op_address:
 	/*
 	 * Parameters to optimized_callback():
 	 * 1. optimized_kprobe structure in r3
 	 */
-	nop
-	nop
-	nop
-	nop
-	nop
+	TEMPLATE_FOR_IMM_LOAD_INSNS
+
 	/* 2. pt_regs pointer in r4 */
 	addi	r4,r1,STACK_FRAME_OVERHEAD
 
@@ -92,11 +101,7 @@ optprobe_template_call_handler:
 	.global optprobe_template_insn
 optprobe_template_insn:
 	/* 2, Pass instruction to be emulated in r4 */
-	nop
-	nop
-	nop
-	nop
-	nop
+	TEMPLATE_FOR_IMM_LOAD_INSNS
 
 	.global optprobe_template_call_emulate
 optprobe_template_call_emulate:
@@ -107,20 +112,18 @@ optprobe_template_call_emulate:
 	 * All done.
 	 * Now, restore the registers...
 	 */
-	ld	r5,_MSR(r1)
+	PPC_LL	r5,_MSR(r1)
 	mtmsr	r5
-	ld	r5,_CTR(r1)
+	PPC_LL	r5,_CTR(r1)
 	mtctr	r5
-	ld	r5,_LINK(r1)
+	PPC_LL	r5,_LINK(r1)
 	mtlr	r5
-	ld	r5,_XER(r1)
+	PPC_LL	r5,_XER(r1)
 	mtxer	r5
-	ld	r5,_CCR(r1)
+	PPC_LL	r5,_CCR(r1)
 	mtcr	r5
 	REST_GPR(0,r1)
-	REST_10GPRS(2,r1)
-	REST_10GPRS(12,r1)
-	REST_10GPRS(22,r1)
+	REST_30GPRS(r1)
 	/* Restore the previous SP */
 	addi	r1,r1,INT_FRAME_SIZE