Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (180 commits)
  powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous
  powerpc/85xx: Add support for the "socrates" board (MPC8544).
  powerpc: Fix bugs introduced by sysfs changes
  powerpc: Sanitize stack pointer in signal handling code
  powerpc: Add write barrier before enabling DTL flags
  powerpc/83xx: Update ranges in gianfar node to match other dts
  powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Add power management support for MPC837x boards
  powerpc/mm: Introduce early_init_mmu() on 64-bit
  powerpc/mm: Add option for non-atomic PTE updates to ppc64
  powerpc/mm: Fix printk type warning in mmu_context_nohash
  powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c
  powerpc/mm: Merge various PTE bits and accessors definitions
  powerpc/mm: Tweak PTE bit combination definitions
  powerpc/cell: Fix iommu exception reporting
  powerpc/mm: e300c2/c3/c4 TLB errata workaround
  powerpc/mm: Used free register to save a few cycles in SW TLB miss handling
  powerpc/mm: Remove unused register usage in SW TLB miss handling
  ...

Documentation/powerpc/dts-bindings/fsl/dma.txt

@@ -35,30 +35,30 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-		reg = <82a8 4>;
-		ranges = <0 8100 1a4>;
+		reg = <0x82a8 4>;
+		ranges = <0 0x8100 0x1a4>;
 		interrupt-parent = <&ipic>;
-		interrupts = <47 8>;
+		interrupts = <71 8>;
 		cell-index = <0>;
 		dma-channel@0 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <0>;
-			reg = <0 80>;
+			reg = <0 0x80>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <1>;
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <2>;
-			reg = <100 80>;
+			reg = <0x100 0x80>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <3>;
-			reg = <180 80>;
+			reg = <0x180 0x80>;
 		};
 	};
 
@@ -93,36 +93,36 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
-		reg = <21300 4>;
-		ranges = <0 21100 200>;
+		reg = <0x21300 4>;
+		ranges = <0 0x21100 0x200>;
 		cell-index = <0>;
 		dma-channel@0 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <0 80>;
+			reg = <0 0x80>;
 			cell-index = <0>;
 			interrupt-parent = <&mpic>;
-			interrupts = <14 2>;
+			interrupts = <20 2>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			cell-index = <1>;
 			interrupt-parent = <&mpic>;
-			interrupts = <15 2>;
+			interrupts = <21 2>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <100 80>;
+			reg = <0x100 0x80>;
 			cell-index = <2>;
 			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
+			interrupts = <22 2>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <180 80>;
+			reg = <0x180 0x80>;
 			cell-index = <3>;
 			interrupt-parent = <&mpic>;
-			interrupts = <17 2>;
+			interrupts = <23 2>;
 		};
 	};
 

Documentation/powerpc/dts-bindings/fsl/esdhc.txt

@@ -0,0 +1,24 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+The Enhanced Secure Digital Host Controller provides an interface
+for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+  - compatible : should be
+    "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
+    "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+  - reg : should contain eSDHC registers location and length.
+  - interrupts : should contain eSDHC interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - clock-frequency : specifies eSDHC base clock frequency.
+
+Example:
+
+sdhci@2e000 {
+	compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+	reg = <0x2e000 0x1000>;
+	interrupts = <42 0x8>;
+	interrupt-parent = <&ipic>;
+	/* Filled in by U-Boot */
+	clock-frequency = <0>;
+};

Documentation/powerpc/dts-bindings/fsl/ssi.txt

@@ -4,44 +4,56 @@ The SSI is a serial device that communicates with audio codecs.  It can
 be programmed in AC97, I2S, left-justified, or right-justified modes.
 
 Required properties:
-- compatible	  : compatible list, containing "fsl,ssi"
-- cell-index	  : the SSI, <0> = SSI1, <1> = SSI2, and so on
-- reg		  : offset and length of the register set for the device
-- interrupts	  : <a b> where a is the interrupt number and b is a
-                     field that represents an encoding of the sense and
-		    level information for the interrupt.  This should be
-		    encoded based on the information in section 2)
-		    depending on the type of interrupt controller you
-		    have.
-- interrupt-parent : the phandle for the interrupt controller that
-                     services interrupts for this device.
-- fsl,mode	  : the operating mode for the SSI interface
-		    "i2s-slave" - I2S mode, SSI is clock slave
-		    "i2s-master" - I2S mode, SSI is clock master
-		    "lj-slave" - left-justified mode, SSI is clock slave
-		    "lj-master" - l.j. mode, SSI is clock master
-		    "rj-slave" - right-justified mode, SSI is clock slave
-		    "rj-master" - r.j., SSI is clock master
-		    "ac97-slave" - AC97 mode, SSI is clock slave
-		    "ac97-master" - AC97 mode, SSI is clock master
-- fsl,playback-dma: phandle to a node for the DMA channel to use for
+- compatible:       Compatible list, contains "fsl,ssi".
+- cell-index:       The SSI, <0> = SSI1, <1> = SSI2, and so on.
+- reg:              Offset and length of the register set for the device.
+- interrupts:       <a b> where a is the interrupt number and b is a
+                    field that represents an encoding of the sense and
+                    level information for the interrupt.  This should be
+                    encoded based on the information in section 2)
+                    depending on the type of interrupt controller you
+                    have.
+- interrupt-parent: The phandle for the interrupt controller that
+                    services interrupts for this device.
+- fsl,mode:         The operating mode for the SSI interface.
+                    "i2s-slave" - I2S mode, SSI is clock slave
+                    "i2s-master" - I2S mode, SSI is clock master
+                    "lj-slave" - left-justified mode, SSI is clock slave
+                    "lj-master" - l.j. mode, SSI is clock master
+                    "rj-slave" - right-justified mode, SSI is clock slave
+                    "rj-master" - r.j., SSI is clock master
+                    "ac97-slave" - AC97 mode, SSI is clock slave
+                    "ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: Phandle to a node for the DMA channel to use for
                     playback of audio.  This is typically dictated by SOC
                     design.  See the notes below.
-- fsl,capture-dma:  phandle to a node for the DMA channel to use for
+- fsl,capture-dma:  Phandle to a node for the DMA channel to use for
                     capture (recording) of audio.  This is typically dictated
                     by SOC design.  See the notes below.
+- fsl,fifo-depth:   The number of elements in the transmit and receive FIFOs.
+                    This number is the maximum allowed value for SFCSR[TFWM0].
+- fsl,ssi-asynchronous:
+                    If specified, the SSI is to be programmed in asynchronous
+                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
+                    all be connected to valid signals.  In synchronous mode,
+                    SRCK and SRFS are ignored.  Asynchronous mode allows
+                    playback and capture to use different sample sizes and
+                    sample rates.  Some drivers may require that SRCK and STCK
+                    be connected together, and SRFS and STFS be connected
+                    together.  This would still allow different sample sizes,
+                    but not different sample rates.
 
 Optional properties:
-- codec-handle	  : phandle to a 'codec' node that defines an audio
-		    codec connected to this SSI.  This node is typically
-		    a child of an I2C or other control node.
+- codec-handle:     Phandle to a 'codec' node that defines an audio
+                    codec connected to this SSI.  This node is typically
+                    a child of an I2C or other control node.
 
 Child 'codec' node required properties:
-- compatible	  : compatible list, contains the name of the codec
+- compatible:       Compatible list, contains the name of the codec
 
 Child 'codec' node optional properties:
-- clock-frequency  : The frequency of the input clock, which typically
-                     comes from an on-board dedicated oscillator.
+- clock-frequency:  The frequency of the input clock, which typically comes
+                    from an on-board dedicated oscillator.
 
 Notes on fsl,playback-dma and fsl,capture-dma:
 

arch/powerpc/Kconfig

@@ -111,6 +111,7 @@ config PPC
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
@@ -312,7 +313,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_PRPMC2800 || PPC_MULTIPLATFORM) && EXPERIMENTAL
+	depends on BOOK3S && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -409,6 +410,18 @@ config PPC_HAS_HASH_64K
 	depends on PPC64
 	default n
 
+config STDBINUTILS
+	bool "Using standard binutils settings"
+	depends on 44x
+	default y
+	help
+	  Turning this option off allows you to select 256KB PAGE_SIZE on 44x.
+	  Note, that kernel will be able to run only those applications,
+	  which had been compiled using binutils later than 2.17.50.0.3 with
+	  '-zmax-page-size' set to 256K (the default is 64K). Or, if using
+	  the older binutils, you can patch them with a trivial patch, which
+	  changes the ELF_MAXPAGESIZE definition from 0x10000 to 0x40000.
+
 choice
 	prompt "Page size"
 	default PPC_4K_PAGES
@@ -444,6 +457,19 @@ config PPC_64K_PAGES
 	bool "64k page size" if 44x || PPC_STD_MMU_64
 	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
+config PPC_256K_PAGES
+	bool "256k page size" if 44x
+	depends on !STDBINUTILS && (!SHMEM || BROKEN)
+	help
+	  Make the page size 256k.
+
+	  As the ELF standard only requires alignment to support page
+	  sizes up to 64k, you will need to compile all of your user
+	  space applications with a non-standard binutils settings
+	  (see the STDBINUTILS description for details).
+
+	  Say N unless you know what you are doing.
+
 endchoice
 
 config FORCE_MAX_ZONEORDER
@@ -456,6 +482,8 @@ config FORCE_MAX_ZONEORDER
 	default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES
 	range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES
 	default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES
+	range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES
+	default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES
 	range 11 64
 	default "11"
 	help
@@ -594,6 +622,7 @@ config FSL_SOC
 config FSL_PCI
  	bool
 	select PPC_INDIRECT_PCI
+	select PCI_QUIRKS
 
 config 4xx_SOC
 	bool
@@ -730,6 +759,22 @@ config LOWMEM_SIZE
 	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
 	default "0x30000000"
 
+config LOWMEM_CAM_NUM_BOOL
+	bool "Set number of CAMs to use to map low memory"
+	depends on ADVANCED_OPTIONS && FSL_BOOKE
+	help
+	  This option allows you to set the maximum number of CAM slots that
+	  will be used to map low memory.  There are a limited number of slots
+	  available and even more limited number that will fit in the L1 MMU.
+	  However, using more entries will allow mapping more low memory.  This
+	  can be useful in optimizing the layout of kernel virtual memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_CAM_NUM
+	int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
+	default 3
+
 config RELOCATABLE
 	bool "Build a relocatable kernel (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
@@ -794,7 +839,7 @@ config PHYSICAL_START
 
 config PHYSICAL_ALIGN
 	hex
-	default "0x10000000" if FSL_BOOKE
+	default "0x04000000" if FSL_BOOKE
 	help
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an
@@ -815,31 +860,6 @@ config TASK_SIZE
 	default "0x80000000" if PPC_PREP || PPC_8xx
 	default "0xc0000000"
 
-config CONSISTENT_START_BOOL
-	bool "Set custom consistent memory pool address"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the base virtual address
-	  of the consistent memory pool.  This pool of virtual
-	  memory is used to make consistent memory allocations.
-
-config CONSISTENT_START
-	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
-	default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx)
-	default "0xff100000" if NOT_COHERENT_CACHE
-
-config CONSISTENT_SIZE_BOOL
-	bool "Set custom consistent memory pool size"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the size of the
-	  consistent memory pool.  This pool of virtual memory
-	  is used to make consistent memory allocations.
-
-config CONSISTENT_SIZE
-	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
-	default "0x00200000" if NOT_COHERENT_CACHE
-
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
 	depends on ADVANCED_OPTIONS && 8xx

arch/powerpc/Kconfig.debug

@@ -129,7 +129,7 @@ config BDI_SWITCH
 
 config BOOTX_TEXT
 	bool "Support for early boot text console (BootX or OpenFirmware only)"
-	depends on PPC_OF && PPC_MULTIPLATFORM
+	depends on PPC_OF && PPC_BOOK3S
 	help
 	  Say Y here to see progress messages from the boot firmware in text
 	  mode. Requires either BootX or Open Firmware.

arch/powerpc/Makefile

@@ -147,8 +147,8 @@ core-y				+= arch/powerpc/kernel/ \
 				   arch/powerpc/mm/ \
 				   arch/powerpc/lib/ \
 				   arch/powerpc/sysdev/ \
-				   arch/powerpc/platforms/
-core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
+				   arch/powerpc/platforms/ \
+				   arch/powerpc/math-emu/
 core-$(CONFIG_XMON)		+= arch/powerpc/xmon/
 core-$(CONFIG_KVM) 		+= arch/powerpc/kvm/
 

arch/powerpc/boot/Makefile

@@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
-		cuboot-acadia.c
+		cuboot-acadia.c cuboot-amigaone.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -235,7 +235,9 @@ image-$(CONFIG_PPC_ADDER875)		+= cuImage.adder875-uboot \
 					   dtbImage.adder875-redboot
 
 # Board ports in arch/powerpc/platform/52xx/Kconfig
-image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 cuImage.lite5200b
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 lite5200.dtb
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200b lite5200b.dtb
+image-$(CONFIG_PPC_MEDIA5200)		+= cuImage.media5200 media5200.dtb
 
 # Board ports in arch/powerpc/platform/82xx/Kconfig
 image-$(CONFIG_MPC8272_ADS)		+= cuImage.mpc8272ads
@@ -274,6 +276,9 @@ image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
 image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
 
+# Board port in arch/powerpc/platform/amigaone/Kconfig
+image-$(CONFIG_AMIGAONE)		+= cuImage.amigaone
+
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
 ifeq ($(CONFIG_PPC32),y)