Merge tag 'v4.5-rc7' into x86/asm, to pick up SMAP fix

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/DocBook/media/v4l/media-types.xml

@@ -56,10 +56,6 @@
 	    <entry><constant>MEDIA_ENT_F_CONN_COMPOSITE</constant></entry>
 	    <entry>Connector for a RGB composite signal.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>MEDIA_ENT_F_CONN_TEST</constant></entry>
-	    <entry>Connector for a test generator.</entry>
-	  </row>
 	  <row>
 	    <entry><constant>MEDIA_ENT_F_CAM_SENSOR</constant></entry>
 	    <entry>Camera video sensor entity.</entry>

Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt

@@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
 clock-output-names:
  - "xin24m" - crystal input - required,
  - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
+ - "rmii_clkin" - external EMAC clock - optional
 
 Example: Clock controller node:
 

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -24,9 +24,8 @@ Main node required properties:
 		1 = edge triggered
 		4 = level triggered
 
-  Cells 4 and beyond are reserved for future use. When the 1st cell
-  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
-  ignored. It is recommended that padding cells have a value of 0.
+  Cells 4 and beyond are reserved for future use and must have a value
+  of 0 if present.
 
 - reg : Specifies base physical address(s) and size of the GIC
   registers, in the following order:

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -82,8 +82,8 @@ Example:
 				  "ch16", "ch17", "ch18", "ch19",
 				  "ch20", "ch21", "ch22", "ch23",
 				  "ch24";
-		clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
-		power-domains = <&cpg_clocks>;
+		clocks = <&cpg CPG_MOD 812>;
+		power-domains = <&cpg>;
 		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 

Documentation/devicetree/bindings/regulator/tps65217.txt

@@ -26,59 +26,49 @@ Example:
 		ti,pmic-shutdown-controller;
 
 		regulators {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
 			dcdc1_reg: dcdc1 {
-				reg = <0>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			dcdc2_reg: dcdc2 {
-				reg = <1>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			dcdc3_reg: dcc3 {
-				reg = <2>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo1_reg: ldo1 {
-				reg = <3>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo2_reg: ldo2 {
-				reg = <4>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo3_reg: ldo3 {
-				reg = <5>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo4_reg: ldo4 {
-				reg = <6>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

@@ -14,11 +14,17 @@ Required properties:
   interrupt number is the rtc alarm interrupt and second interrupt number
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
+- clocks: Must contain a list of phandle and clock specifier for the rtc
+          and source clocks.
+- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
+               same order as the clocks property.
 
 Example:
 
 	rtc@10070000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <44 0 45 0>;
+		clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.

Documentation/watchdog/watchdog-parameters.txt

@@ -400,3 +400,7 @@ wm8350_wdt:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+sun4v_wdt:
+timeout_ms: Watchdog timeout in milliseconds 1..180000, default=60000)
+nowayout: Watchdog cannot be stopped once started
+-------------------------------------------------

MAINTAINERS

@@ -920,17 +920,24 @@ M:	Emilio López <emilio@elopez.com.ar>
 S:	Maintained
 F:	drivers/clk/sunxi/
 
-ARM/Amlogic MesonX SoC support
+ARM/Amlogic Meson SoC support
 M:	Carlo Caione <carlo@caione.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-meson@googlegroups.com
+W:	http://linux-meson.com/
 S:	Maintained
-F:	drivers/media/rc/meson-ir.c
-N:	meson[x68]
+F:	arch/arm/mach-meson/
+F:	arch/arm/boot/dts/meson*
+N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
 M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
+M:	Antoine Tenart <antoine.tenart@free-electrons.com>
 S:	Maintained
 F:	arch/arm/mach-alpine/
+F:	arch/arm/boot/dts/alpine*
+F:	arch/arm64/boot/dts/al/
+F:	drivers/*/*alpine*
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
@@ -3444,7 +3451,6 @@ F:	drivers/usb/dwc2/
 DESIGNWARE USB3 DRD IP DRIVER
 M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
-L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
 F:	drivers/usb/dwc3/
@@ -4512,6 +4518,12 @@ L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
+FREESCALE GPMI NAND DRIVER
+M:	Han Xu <han.xu@nxp.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/gpmi-nand/*
+
 FREESCALE I2C CPM DRIVER
 M:	Jochen Friedrich <jochen@scram.de>
 L:	linuxppc-dev@lists.ozlabs.org
@@ -4528,7 +4540,7 @@ F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/fbdev/imxfb.c
 
 FREESCALE QUAD SPI DRIVER
-M:	Han Xu <han.xu@freescale.com>
+M:	Han Xu <han.xu@nxp.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/spi-nor/fsl-quadspi.c
@@ -6128,7 +6140,7 @@ F:	include/uapi/linux/sunrpc/
 
 KERNEL SELFTEST FRAMEWORK
 M:	Shuah Khan <shuahkh@osg.samsung.com>
-L:	linux-api@vger.kernel.org
+L:	linux-kselftest@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/shuah/linux-kselftest
 S:	Maintained
 F:	tools/testing/selftests
@@ -7354,7 +7366,7 @@ F:	drivers/tty/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <balbi@kernel.org>
+M:	Bin Liu <b-liu@ti.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@@ -7686,13 +7698,13 @@ S:	Maintained
 F:	arch/nios2/
 
 NOKIA N900 POWER SUPPLY DRIVERS
-M:	Pali Rohár <pali.rohar@gmail.com>
-S:	Maintained
+R:	Pali Rohár <pali.rohar@gmail.com>
 F:	include/linux/power/bq2415x_charger.h
 F:	include/linux/power/bq27xxx_battery.h
 F:	include/linux/power/isp1704_charger.h
 F:	drivers/power/bq2415x_charger.c
 F:	drivers/power/bq27xxx_battery.c
+F:	drivers/power/bq27xxx_battery_i2c.c
 F:	drivers/power/isp1704_charger.c
 F:	drivers/power/rx51_battery.c
 
@@ -7923,11 +7935,9 @@ F:	drivers/media/platform/omap3isp/
 F:	drivers/staging/media/omap4iss/
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/*/*omap*
 F:	arch/arm/*omap*/usb*
 
@@ -9558,6 +9568,12 @@ M:	Andreas Noever <andreas.noever@gmail.com>
 S:	Maintained
 F:	drivers/thunderbolt/
 
+TI BQ27XXX POWER SUPPLY DRIVER
+R:	Andrew F. Davis <afd@ti.com>
+F:	include/linux/power/bq27xxx_battery.h
+F:	drivers/power/bq27xxx_battery.c
+F:	drivers/power/bq27xxx_battery_i2c.c
+
 TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
 M:	John Stultz <john.stultz@linaro.org>
 M:	Thomas Gleixner <tglx@linutronix.de>
@@ -12013,7 +12029,6 @@ F:	arch/arm64/xen/
 F:	arch/arm64/include/asm/xen/
 
 XEN NETWORK BACKEND DRIVER
-M:	Ian Campbell <ian.campbell@citrix.com>
 M:	Wei Liu <wei.liu2@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc7
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -12,8 +12,6 @@ config ARC
 	select BUILDTIME_EXTABLE_SORT
 	select COMMON_CLK
 	select CLONE_BACKWARDS
-	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
-	select DEVTMPFS if !INITRAMFS_SOURCE=""
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_FIND_FIRST_BIT
@@ -275,14 +273,6 @@ config ARC_DCCM_BASE
 	default "0xA0000000"
 	depends on ARC_HAS_DCCM
 
-config ARC_HAS_HW_MPY
-	bool "Use Hardware Multiplier (Normal or Faster XMAC)"
-	default y
-	help
-	  Influences how gcc generates code for MPY operations.
-	  If enabled, MPYxx insns are generated, provided by Standard/XMAC
-	  Multipler. Otherwise software multipy lib is used
-
 choice
 	prompt "MMU Version"
 	default ARC_MMU_V3 if ARC_CPU_770
@@ -542,14 +532,6 @@ config ARC_DBG_TLB_MISS_COUNT
 	  Counts number of I and D TLB Misses and exports them via Debugfs
 	  The counters can be cleared via Debugfs as well
 
-if SMP
-
-config ARC_IPI_DBG
-	bool "Debug Inter Core interrupts"
-	default n
-
-endif
-
 endif
 
 config ARC_UBOOT_SUPPORT

arch/arc/Makefile

@@ -74,10 +74,6 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
 # --build-id w/o "-marclinux". Default arc-elf32-ld is OK
 ldflags-$(upto_gcc44)			+= -marclinux
 
-ifndef CONFIG_ARC_HAS_HW_MPY
-	cflags-y	+= -mno-mpy
-endif
-
 LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
 
 # Modules with short calls might break for calls into builtin-kernel

arch/arc/configs/axs101_defconfig

@@ -39,6 +39,7 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -73,7 +74,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
@@ -91,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y

arch/arc/configs/axs103_defconfig

@@ -39,14 +39,10 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AXS=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -78,14 +74,12 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -97,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y