Merge tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/li…

…nux/kernel/git/ukleinek/linux

Pull pwm fixes from Uwe Kleine-König:
 "A set of fixes for pwm core and various drivers

  The first three patches handle clk_get_rate() returning 0 (which might
  happen for example if the CCF is disabled). The first of these was
  found because this triggered a warning with clang, the two others by
  looking for similar issues in other drivers.

  The remaining three fixes address issues in the new waveform pwm API.
  Now that I worked on this a bit more, the finer details and corner
  cases are better understood and the code is fixed accordingly"

* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
  pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
  pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
  pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
  pwm: fsl-ftm: Handle clk_get_rate() returning 0
  pwm: rcar: Improve register calculation
  pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()

drivers/pwm/core.c

@@ -322,7 +322,7 @@ static int __pwm_set_waveform(struct pwm_device *pwm,
 	const struct pwm_ops *ops = chip->ops;
 	char wfhw[WFHWSIZE];
 	struct pwm_waveform wf_rounded;
-	int err;
+	int err, ret_tohw;
 
 	BUG_ON(WFHWSIZE < ops->sizeof_wfhw);
 
@@ -332,16 +332,16 @@ static int __pwm_set_waveform(struct pwm_device *pwm,
 	if (!pwm_wf_valid(wf))
 		return -EINVAL;
 
-	err = __pwm_round_waveform_tohw(chip, pwm, wf, &wfhw);
-	if (err)
-		return err;
+	ret_tohw = __pwm_round_waveform_tohw(chip, pwm, wf, &wfhw);
+	if (ret_tohw < 0)
+		return ret_tohw;
 
 	if ((IS_ENABLED(CONFIG_PWM_DEBUG) || exact) && wf->period_length_ns) {
 		err = __pwm_round_waveform_fromhw(chip, pwm, &wfhw, &wf_rounded);
 		if (err)
 			return err;
 
-		if (IS_ENABLED(CONFIG_PWM_DEBUG) && !pwm_check_rounding(wf, &wf_rounded))
+		if (IS_ENABLED(CONFIG_PWM_DEBUG) && ret_tohw == 0 && !pwm_check_rounding(wf, &wf_rounded))
 			dev_err(&chip->dev, "Wrong rounding: requested %llu/%llu [+%llu], result %llu/%llu [+%llu]\n",
 				wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns,
 				wf_rounded.duty_length_ns, wf_rounded.period_length_ns, wf_rounded.duty_offset_ns);
@@ -382,7 +382,8 @@ static int __pwm_set_waveform(struct pwm_device *pwm,
 				wf_rounded.duty_length_ns, wf_rounded.period_length_ns, wf_rounded.duty_offset_ns,
 				wf_set.duty_length_ns, wf_set.period_length_ns, wf_set.duty_offset_ns);
 	}
-	return 0;
+
+	return ret_tohw;
 }
 
 /**

drivers/pwm/pwm-axi-pwmgen.c

@@ -75,6 +75,7 @@ static int axi_pwmgen_round_waveform_tohw(struct pwm_chip *chip,
 {
 	struct axi_pwmgen_waveform *wfhw = _wfhw;
 	struct axi_pwmgen_ddata *ddata = axi_pwmgen_ddata_from_chip(chip);
+	int ret = 0;
 
 	if (wf->period_length_ns == 0) {
 		*wfhw = (struct axi_pwmgen_waveform){
@@ -91,12 +92,15 @@ static int axi_pwmgen_round_waveform_tohw(struct pwm_chip *chip,
 		if (wfhw->period_cnt == 0) {
 			/*
 			 * The specified period is too short for the hardware.
-			 * Let's round .duty_cycle down to 0 to get a (somewhat)
-			 * valid result.
+			 * So round up .period_cnt to 1 (i.e. the smallest
+			 * possible period). With .duty_cycle and .duty_offset
+			 * being less than or equal to .period, their rounded
+			 * value must be 0.
 			 */
 			wfhw->period_cnt = 1;
 			wfhw->duty_cycle_cnt = 0;
 			wfhw->duty_offset_cnt = 0;
+			ret = 1;
 		} else {
 			wfhw->duty_cycle_cnt = min_t(u64,
 						     mul_u64_u32_div(wf->duty_length_ns, ddata->clk_rate_hz, NSEC_PER_SEC),
@@ -111,7 +115,7 @@ static int axi_pwmgen_round_waveform_tohw(struct pwm_chip *chip,
 		pwm->hwpwm, wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns,
 		ddata->clk_rate_hz, wfhw->period_cnt, wfhw->duty_cycle_cnt, wfhw->duty_offset_cnt);
 
-	return 0;
+	return ret;
 }
 
 static int axi_pwmgen_round_waveform_fromhw(struct pwm_chip *chip, struct pwm_device *pwm,

drivers/pwm/pwm-fsl-ftm.c

@@ -118,6 +118,9 @@ static unsigned int fsl_pwm_ticks_to_ns(struct fsl_pwm_chip *fpc,
 	unsigned long long exval;
 
 	rate = clk_get_rate(fpc->clk[fpc->period.clk_select]);
+	if (rate >> fpc->period.clk_ps == 0)
+		return 0;
+
 	exval = ticks;
 	exval *= 1000000000UL;
 	do_div(exval, rate >> fpc->period.clk_ps);
@@ -190,6 +193,9 @@ static unsigned int fsl_pwm_calculate_duty(struct fsl_pwm_chip *fpc,
 	unsigned int period = fpc->period.mod_period + 1;
 	unsigned int period_ns = fsl_pwm_ticks_to_ns(fpc, period);
 
+	if (!period_ns)
+		return 0;
+
 	duty = (unsigned long long)duty_ns * period;
 	do_div(duty, period_ns);
 

drivers/pwm/pwm-mediatek.c

@@ -121,21 +121,25 @@ static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct pwm_mediatek_chip *pc = to_pwm_mediatek_chip(chip);
 	u32 clkdiv = 0, cnt_period, cnt_duty, reg_width = PWMDWIDTH,
 	    reg_thres = PWMTHRES;
+	unsigned long clk_rate;
 	u64 resolution;
 	int ret;
 
 	ret = pwm_mediatek_clk_enable(chip, pwm);
-
 	if (ret < 0)
 		return ret;
 
+	clk_rate = clk_get_rate(pc->clk_pwms[pwm->hwpwm]);
+	if (!clk_rate)
+		return -EINVAL;
+
 	/* Make sure we use the bus clock and not the 26MHz clock */
 	if (pc->soc->has_ck_26m_sel)
 		writel(0, pc->regs + PWM_CK_26M_SEL);
 
 	/* Using resolution in picosecond gets accuracy higher */
 	resolution = (u64)NSEC_PER_SEC * 1000;
-	do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm]));
+	do_div(resolution, clk_rate);
 
 	cnt_period = DIV_ROUND_CLOSEST_ULL((u64)period_ns * 1000, resolution);
 	while (cnt_period > 8191) {

drivers/pwm/pwm-rcar.c

@@ -8,6 +8,7 @@
  * - The hardware cannot generate a 0% duty cycle.
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
@@ -102,23 +103,24 @@ static void rcar_pwm_set_clock_control(struct rcar_pwm_chip *rp,
 	rcar_pwm_write(rp, value, RCAR_PWMCR);
 }
 
-static int rcar_pwm_set_counter(struct rcar_pwm_chip *rp, int div, int duty_ns,
-				int period_ns)
+static int rcar_pwm_set_counter(struct rcar_pwm_chip *rp, int div, u64 duty_ns,
+				u64 period_ns)
 {
-	unsigned long long one_cycle, tmp;	/* 0.01 nanoseconds */
+	unsigned long long tmp;
 	unsigned long clk_rate = clk_get_rate(rp->clk);
 	u32 cyc, ph;
 
-	one_cycle = NSEC_PER_SEC * 100ULL << div;
-	do_div(one_cycle, clk_rate);
+	/* div <= 24 == RCAR_PWM_MAX_DIVISION, so the shift doesn't overflow. */
+	tmp = mul_u64_u64_div_u64(period_ns, clk_rate, (u64)NSEC_PER_SEC << div);
+	if (tmp > FIELD_MAX(RCAR_PWMCNT_CYC0_MASK))
+		tmp = FIELD_MAX(RCAR_PWMCNT_CYC0_MASK);
 
-	tmp = period_ns * 100ULL;
-	do_div(tmp, one_cycle);
-	cyc = (tmp << RCAR_PWMCNT_CYC0_SHIFT) & RCAR_PWMCNT_CYC0_MASK;
+	cyc = FIELD_PREP(RCAR_PWMCNT_CYC0_MASK, tmp);
 
-	tmp = duty_ns * 100ULL;
-	do_div(tmp, one_cycle);
-	ph = tmp & RCAR_PWMCNT_PH0_MASK;
+	tmp = mul_u64_u64_div_u64(duty_ns, clk_rate, (u64)NSEC_PER_SEC << div);
+	if (tmp > FIELD_MAX(RCAR_PWMCNT_PH0_MASK))
+		tmp = FIELD_MAX(RCAR_PWMCNT_PH0_MASK);
+	ph = FIELD_PREP(RCAR_PWMCNT_PH0_MASK, tmp);
 
 	/* Avoid prohibited setting */
 	if (cyc == 0 || ph == 0)

drivers/pwm/pwm-stm32.c

@@ -103,22 +103,16 @@ static int stm32_pwm_round_waveform_tohw(struct pwm_chip *chip,
 		if (ret)
 			goto out;
 
-		/*
-		 * calculate the best value for ARR for the given PSC, refuse if
-		 * the resulting period gets bigger than the requested one.
-		 */
 		arr = mul_u64_u64_div_u64(wf->period_length_ns, rate,
 					  (u64)NSEC_PER_SEC * (wfhw->psc + 1));
 		if (arr <= wfhw->arr) {
 			/*
-			 * requested period is small than the currently
+			 * requested period is smaller than the currently
 			 * configured and unchangable period, report back the smallest
-			 * possible period, i.e. the current state; Initialize
-			 * ccr to anything valid.
+			 * possible period, i.e. the current state and return 1
+			 * to indicate the wrong rounding direction.
 			 */
-			wfhw->ccr = 0;
 			ret = 1;
-			goto out;
 		}
 
 	} else {