net-next:v4: Add support to configure SR-IOV VF minimum and maximum T…

…x rate through ip tool.

o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed
  to have a bandwidth of at least this value.
  max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth
  of up to this value.

o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced
  which takes 4 arguments:
  netdev, VF number, min_tx_rate, max_tx_rate

o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler.

o Drivers that currently implement ndo_set_vf_tx_rate should now call
  ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth
  greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet
  implemented by driver.

o If user enters only one of either min_tx_rate or max_tx_rate, then,
  userland should read back the other value from driver and set both
  for IFLA_VF_RATE.
  Drivers that have not yet implemented IFLA_VF_RATE should always
  return min_tx_rate as 0 when read from ip tool.

o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then
  IFLA_VF_RATE should override.

o Idea is to have consistent display of rate values to user.

o Usage example: -

  ./ip link set p4p1 vf 0 rate 900

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

  ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps,
    min_tx_rate 200Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

  ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps,
    min_tx_rate 200Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

@@ -2576,7 +2576,8 @@ int bnx2x_get_vf_config(struct net_device *dev, int vfidx,
 
 	ivi->vf = vfidx;
 	ivi->qos = 0;
-	ivi->tx_rate = 10000; /* always 10G. TBA take from link struct */
+	ivi->max_tx_rate = 10000; /* always 10G. TBA take from link struct */
+	ivi->min_tx_rate = 0;
 	ivi->spoofchk = 1; /*always enabled */
 	if (vf->state == VF_ENABLED) {
 		/* mac and vlan are in vlan_mac objects */

drivers/net/ethernet/emulex/benet/be_main.c

@@ -1302,7 +1302,8 @@ static int be_get_vf_config(struct net_device *netdev, int vf,
 		return -EINVAL;
 
 	vi->vf = vf;
-	vi->tx_rate = vf_cfg->tx_rate;
+	vi->max_tx_rate = vf_cfg->tx_rate;
+	vi->min_tx_rate = 0;
 	vi->vlan = vf_cfg->vlan_tag & VLAN_VID_MASK;
 	vi->qos = vf_cfg->vlan_tag >> VLAN_PRIO_SHIFT;
 	memcpy(&vi->mac, vf_cfg->mac_addr, ETH_ALEN);
@@ -1342,7 +1343,8 @@ static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
 	return status;
 }
 
-static int be_set_vf_tx_rate(struct net_device *netdev, int vf, int rate)
+static int be_set_vf_tx_rate(struct net_device *netdev, int vf,
+			     int min_tx_rate, int max_tx_rate)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 	int status = 0;
@@ -1353,18 +1355,21 @@ static int be_set_vf_tx_rate(struct net_device *netdev, int vf, int rate)
 	if (vf >= adapter->num_vfs)
 		return -EINVAL;
 
-	if (rate < 100 || rate > 10000) {
+	if (min_tx_rate)
+		return -EINVAL;
+
+	if (max_tx_rate < 100 || max_tx_rate > 10000) {
 		dev_err(&adapter->pdev->dev,
-			"tx rate must be between 100 and 10000 Mbps\n");
+			"max tx rate must be between 100 and 10000 Mbps\n");
 		return -EINVAL;
 	}
 
-	status = be_cmd_config_qos(adapter, rate / 10, vf + 1);
+	status = be_cmd_config_qos(adapter, max_tx_rate / 10, vf + 1);
 	if (status)
 		dev_err(&adapter->pdev->dev,
-			"tx rate %d on VF %d failed\n", rate, vf);
+			"max tx rate %d on VF %d failed\n", max_tx_rate, vf);
 	else
-		adapter->vf_cfg[vf].tx_rate = rate;
+		adapter->vf_cfg[vf].tx_rate = max_tx_rate;
 	return status;
 }
 static int be_set_vf_link_state(struct net_device *netdev, int vf,
@@ -4257,7 +4262,7 @@ static const struct net_device_ops be_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= be_vlan_rem_vid,
 	.ndo_set_vf_mac		= be_set_vf_mac,
 	.ndo_set_vf_vlan	= be_set_vf_vlan,
-	.ndo_set_vf_tx_rate	= be_set_vf_tx_rate,
+	.ndo_set_vf_rate	= be_set_vf_tx_rate,
 	.ndo_get_vf_config	= be_get_vf_config,
 	.ndo_set_vf_link_state  = be_set_vf_link_state,
 #ifdef CONFIG_NET_POLL_CONTROLLER

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -6724,7 +6724,7 @@ static const struct net_device_ops i40e_netdev_ops = {
 	.ndo_set_features	= i40e_set_features,
 	.ndo_set_vf_mac		= i40e_ndo_set_vf_mac,
 	.ndo_set_vf_vlan	= i40e_ndo_set_vf_port_vlan,
-	.ndo_set_vf_tx_rate	= i40e_ndo_set_vf_bw,
+	.ndo_set_vf_rate	= i40e_ndo_set_vf_bw,
 	.ndo_get_vf_config	= i40e_ndo_get_vf_config,
 	.ndo_set_vf_link_state	= i40e_ndo_set_vf_link_state,
 #ifdef CONFIG_I40E_VXLAN

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c

@@ -2205,7 +2205,8 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev,
  *
  * configure vf tx rate
  **/
-int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate)
+int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int min_tx_rate,
+		       int max_tx_rate)
 {
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_pf *pf = np->vsi->back;
@@ -2221,6 +2222,12 @@ int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate)
 		goto error;
 	}
 
+	if (min_tx_rate) {
+		dev_err(&pf->pdev->dev, "Invalid min tx rate (%d) (greater than 0) specified for vf %d.\n",
+			min_tx_rate, vf_id);
+		return -EINVAL;
+	}
+
 	vf = &(pf->vf[vf_id]);
 	vsi = pf->vsi[vf->lan_vsi_index];
 	if (!test_bit(I40E_VF_STAT_INIT, &vf->vf_states)) {
@@ -2243,23 +2250,23 @@ int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate)
 		break;
 	}
 
-	if (tx_rate > speed) {
-		dev_err(&pf->pdev->dev, "Invalid tx rate %d specified for vf %d.",
-			tx_rate, vf->vf_id);
+	if (max_tx_rate > speed) {
+		dev_err(&pf->pdev->dev, "Invalid max tx rate %d specified for vf %d.",
+			max_tx_rate, vf->vf_id);
 		ret = -EINVAL;
 		goto error;
 	}
 
 	/* Tx rate credits are in values of 50Mbps, 0 is disabled*/
-	ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid, tx_rate / 50, 0,
-					  NULL);
+	ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid, max_tx_rate / 50,
+					  0, NULL);
 	if (ret) {
-		dev_err(&pf->pdev->dev, "Unable to set tx rate, error code %d.\n",
+		dev_err(&pf->pdev->dev, "Unable to set max tx rate, error code %d.\n",
 			ret);
 		ret = -EIO;
 		goto error;
 	}
-	vf->tx_rate = tx_rate;
+	vf->tx_rate = max_tx_rate;
 error:
 	return ret;
 }
@@ -2301,7 +2308,8 @@ int i40e_ndo_get_vf_config(struct net_device *netdev,
 
 	memcpy(&ivi->mac, vf->default_lan_addr.addr, ETH_ALEN);
 
-	ivi->tx_rate = vf->tx_rate;
+	ivi->max_tx_rate = vf->tx_rate;
+	ivi->min_tx_rate = 0;
 	ivi->vlan = le16_to_cpu(vsi->info.pvid) & I40E_VLAN_MASK;
 	ivi->qos = (le16_to_cpu(vsi->info.pvid) & I40E_PRIORITY_MASK) >>
 		   I40E_VLAN_PRIORITY_SHIFT;

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h

@@ -116,7 +116,8 @@ void i40e_vc_notify_vf_reset(struct i40e_vf *vf);
 int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac);
 int i40e_ndo_set_vf_port_vlan(struct net_device *netdev,
 			      int vf_id, u16 vlan_id, u8 qos);
-int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate);
+int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int min_tx_rate,
+		       int max_tx_rate);
 int i40e_ndo_get_vf_config(struct net_device *netdev,
 			   int vf_id, struct ifla_vf_info *ivi);
 int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link);

drivers/net/ethernet/intel/igb/igb_main.c

@@ -169,7 +169,7 @@ static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
 static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
 static int igb_ndo_set_vf_vlan(struct net_device *netdev,
 			       int vf, u16 vlan, u8 qos);
-static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
+static int igb_ndo_set_vf_bw(struct net_device *, int, int, int);
 static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
 				   bool setting);
 static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
@@ -2084,7 +2084,7 @@ static const struct net_device_ops igb_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= igb_vlan_rx_kill_vid,
 	.ndo_set_vf_mac		= igb_ndo_set_vf_mac,
 	.ndo_set_vf_vlan	= igb_ndo_set_vf_vlan,
-	.ndo_set_vf_tx_rate	= igb_ndo_set_vf_bw,
+	.ndo_set_vf_rate	= igb_ndo_set_vf_bw,
 	.ndo_set_vf_spoofchk	= igb_ndo_set_vf_spoofchk,
 	.ndo_get_vf_config	= igb_ndo_get_vf_config,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -7879,7 +7879,8 @@ static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
 	}
 }
 
-static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf,
+			     int min_tx_rate, int max_tx_rate)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -7888,15 +7889,19 @@ static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
 	if (hw->mac.type != e1000_82576)
 		return -EOPNOTSUPP;
 
+	if (min_tx_rate)
+		return -EINVAL;
+
 	actual_link_speed = igb_link_mbps(adapter->link_speed);
 	if ((vf >= adapter->vfs_allocated_count) ||
 	    (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
-	    (tx_rate < 0) || (tx_rate > actual_link_speed))
+	    (max_tx_rate < 0) ||
+	    (max_tx_rate > actual_link_speed))
 		return -EINVAL;
 
 	adapter->vf_rate_link_speed = actual_link_speed;
-	adapter->vf_data[vf].tx_rate = (u16)tx_rate;
-	igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
+	adapter->vf_data[vf].tx_rate = (u16)max_tx_rate;
+	igb_set_vf_rate_limit(hw, vf, max_tx_rate, actual_link_speed);
 
 	return 0;
 }
@@ -7936,7 +7941,8 @@ static int igb_ndo_get_vf_config(struct net_device *netdev,
 		return -EINVAL;
 	ivi->vf = vf;
 	memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
-	ivi->tx_rate = adapter->vf_data[vf].tx_rate;
+	ivi->max_tx_rate = adapter->vf_data[vf].tx_rate;
+	ivi->min_tx_rate = 0;
 	ivi->vlan = adapter->vf_data[vf].pf_vlan;
 	ivi->qos = adapter->vf_data[vf].pf_qos;
 	ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled;

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -7926,7 +7926,7 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_do_ioctl		= ixgbe_ioctl,
 	.ndo_set_vf_mac		= ixgbe_ndo_set_vf_mac,
 	.ndo_set_vf_vlan	= ixgbe_ndo_set_vf_vlan,
-	.ndo_set_vf_tx_rate	= ixgbe_ndo_set_vf_bw,
+	.ndo_set_vf_rate	= ixgbe_ndo_set_vf_bw,
 	.ndo_set_vf_spoofchk	= ixgbe_ndo_set_vf_spoofchk,
 	.ndo_get_vf_config	= ixgbe_ndo_get_vf_config,
 	.ndo_get_stats64	= ixgbe_get_stats64,

drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c

@@ -1222,7 +1222,8 @@ void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
 	}
 }
 
-int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
+int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
+			int max_tx_rate)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	int link_speed;
@@ -1240,13 +1241,16 @@ int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
 	if (link_speed != 10000)
 		return -EINVAL;
 
+	if (min_tx_rate)
+		return -EINVAL;
+
 	/* rate limit cannot be less than 10Mbs or greater than link speed */
-	if (tx_rate && ((tx_rate <= 10) || (tx_rate > link_speed)))
+	if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
 		return -EINVAL;
 
 	/* store values */
 	adapter->vf_rate_link_speed = link_speed;
-	adapter->vfinfo[vf].tx_rate = tx_rate;
+	adapter->vfinfo[vf].tx_rate = max_tx_rate;
 
 	/* update hardware configuration */
 	ixgbe_set_vf_rate_limit(adapter, vf);
@@ -1288,7 +1292,8 @@ int ixgbe_ndo_get_vf_config(struct net_device *netdev,
 		return -EINVAL;
 	ivi->vf = vf;
 	memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
-	ivi->tx_rate = adapter->vfinfo[vf].tx_rate;
+	ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
+	ivi->min_tx_rate = 0;
 	ivi->vlan = adapter->vfinfo[vf].pf_vlan;
 	ivi->qos = adapter->vfinfo[vf].pf_qos;
 	ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;

drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h

@@ -44,7 +44,8 @@ void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter);
 int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int queue, u8 *mac);
 int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int queue, u16 vlan,
 			   u8 qos);
-int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
+int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
+			int max_tx_rate);
 int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting);
 int ixgbe_ndo_get_vf_config(struct net_device *netdev,
 			    int vf, struct ifla_vf_info *ivi);

drivers/net/ethernet/mellanox/mlx4/cmd.c

@@ -2486,11 +2486,12 @@ int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_in
 	ivf->mac[4] = ((s_info->mac >> (1*8)) & 0xff);
 	ivf->mac[5] = ((s_info->mac)  & 0xff);
 
-	ivf->vlan	= s_info->default_vlan;
-	ivf->qos	= s_info->default_qos;
-	ivf->tx_rate	= s_info->tx_rate;
-	ivf->spoofchk	= s_info->spoofchk;
-	ivf->linkstate	= s_info->link_state;
+	ivf->vlan		= s_info->default_vlan;
+	ivf->qos		= s_info->default_qos;
+	ivf->max_tx_rate	= s_info->tx_rate;
+	ivf->min_tx_rate	= 0;
+	ivf->spoofchk		= s_info->spoofchk;
+	ivf->linkstate		= s_info->link_state;
 
 	return 0;
 }

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -1319,6 +1319,7 @@ struct qlcnic_eswitch {
 #define QL_STATUS_INVALID_PARAM	-1
 
 #define MAX_BW			100	/* % of link speed */
+#define MIN_BW			1	/* % of link speed */
 #define MAX_VLAN_ID		4095
 #define MIN_VLAN_ID		2
 #define DEFAULT_MAC_LEARN	1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -525,7 +525,7 @@ static const struct net_device_ops qlcnic_netdev_ops = {
 #endif
 #ifdef CONFIG_QLCNIC_SRIOV
 	.ndo_set_vf_mac		= qlcnic_sriov_set_vf_mac,
-	.ndo_set_vf_tx_rate	= qlcnic_sriov_set_vf_tx_rate,
+	.ndo_set_vf_rate	= qlcnic_sriov_set_vf_tx_rate,
 	.ndo_get_vf_config	= qlcnic_sriov_get_vf_config,
 	.ndo_set_vf_vlan	= qlcnic_sriov_set_vf_vlan,
 	.ndo_set_vf_spoofchk	= qlcnic_sriov_set_vf_spoofchk,

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h

@@ -233,7 +233,7 @@ bool qlcnic_sriov_soft_flr_check(struct qlcnic_adapter *,
 void qlcnic_sriov_pf_reset(struct qlcnic_adapter *);
 int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *);
 int qlcnic_sriov_set_vf_mac(struct net_device *, int, u8 *);
-int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int);
+int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int, int);
 int qlcnic_sriov_get_vf_config(struct net_device *, int ,
 			       struct ifla_vf_info *);
 int qlcnic_sriov_set_vf_vlan(struct net_device *, int, u16, u8);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c

@@ -201,6 +201,7 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs)
 			sriov->vf_info[i].vp = vp;
 			vp->vlan_mode = QLC_GUEST_VLAN_MODE;
 			vp->max_tx_bw = MAX_BW;
+			vp->min_tx_bw = MIN_BW;
 			vp->spoofchk = false;
 			random_ether_addr(vp->mac);
 			dev_info(&adapter->pdev->dev,