Merge branch 'create-a-binding-for-the-marvell-mv88e6xxx-dsa-switches'

Linus Walleij says:

====================
Create a binding for the Marvell MV88E6xxx DSA switches

The Marvell switches are lacking DT bindings.

I need proper schema checking to add LED support to the
Marvell switch. Just how it is, it can't go on like this.

Some Device Tree fixes are included in the series, these
remove the major and most annoying warnings fallout noise:
some warnings remain, and these are of more serious nature,
such as missing phy-mode. They can be applied individually,
or to the networking tree with the rest of the patches.

Thanks to Andrew Lunn, Vladimir Oltean and Russell King
for excellent review and feedback!

This latest version employs special compatibles in the
odd ABI device trees.

v8: https://lore.kernel.org/r/20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org
v7: https://lore.kernel.org/r/20231024-marvell-88e6152-wan-led-v7-0-2869347697d1@linaro.org
v6: https://lore.kernel.org/r/20231024-marvell-88e6152-wan-led-v6-0-993ab0949344@linaro.org
v5: https://lore.kernel.org/r/20231023-marvell-88e6152-wan-led-v5-0-0e82952015a7@linaro.org
v4: https://lore.kernel.org/r/20231018-marvell-88e6152-wan-led-v4-0-3ee0c67383be@linaro.org
v3: https://lore.kernel.org/r/20231016-marvell-88e6152-wan-led-v3-0-38cd449dfb15@linaro.org
v2: https://lore.kernel.org/r/20231014-marvell-88e6152-wan-led-v2-0-7fca08b68849@linaro.org
v1: https://lore.kernel.org/r/20231013-marvell-88e6152-wan-led-v1-0-0712ba99857c@linaro.org
====================

Link: https://lore.kernel.org/r/20231127-marvell-88e6152-wan-led-v9-0-272934e04681@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/devicetree/bindings/net/dsa/dsa.yaml

@@ -46,4 +46,10 @@ $defs:
             $ref: dsa-port.yaml#
             unevaluatedProperties: false
 
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
 ...

Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml

@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV88E6060 DSA switch
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  The Marvell MV88E6060 switch has been produced and sold by Marvell
+  since at least 2008. The switch has one pin ADDR4 that controls the
+  MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus
+  connected to the switch, the PHYs inside the switch appear as
+  independent devices on address 0x00-0x04 or 0x10-0x14, so in difference
+  from many other DSA switches this switch does not have an internal
+  MDIO bus for the PHY devices.
+
+properties:
+  compatible:
+    const: marvell,mv88e6060
+    description:
+      The MV88E6060 is the oldest Marvell DSA switch product, and
+      as such a bit limited in features compared to later hardware.
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@16 {
+            compatible = "marvell,mv88e6060";
+            reg = <16>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                ethernet-port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                ethernet-port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                ethernet-port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                ethernet-port@5 {
+                    reg = <5>;
+                    phy-mode = "rev-mii";
+                    ethernet = <&ethc>;
+                    fixed-link {
+                        speed = <100>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };