Merge tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big set of driver patches for char/misc drivers.  Nothing
  major in here, the shortlog goes into the details.  All have been in
  the linux-next tree for a while with no issues"

* tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (80 commits)
  mei: mei_txe_fw_sts can be static
  mei: fix kernel-doc warnings
  mei: fix KDoc documentation formatting
  mei: drop me_client_presentation_num
  mei: trivial: fix errors in prints in comments
  mei: remove include to pci header from mei module files
  mei: push pci cfg structure me hw
  mei: remove the reference to pdev from mei_device
  mei: move fw_status back to hw ops handlers
  mei: get rid of most of the pci dependencies in mei
  mei: push all standard settings into mei_device_init
  mei: move mei_hbm_hdr function from hbm.h the hbm.c
  mei: kill error message for allocation failure
  mei: nfc: fix style warning
  mei: fix style warning: Missing a blank line after declarations
  mei: pg: fix cat and paste error in comments
  mei: debugfs: add single buffer indicator
  mei: debugfs: adjust print buffer
  mei: add hbm and pg state in devstate debugfs print
  Drivers: hv: vmbus: Enable interrupt driven flow control
  ...

Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt

@@ -0,0 +1,25 @@
+
+* Richtek RT8973A - Micro USB Switch device
+
+The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A
+is a USB port accessory detector and switch that is optimized to protect low
+voltage system from abnormal high input voltage (up to 28V) and supports high
+speed USB operation. Also, RT8973A support 'auto-configuration' mode.
+If auto-configuration mode is enabled, RT8973A would control internal h/w patch
+for USB D-/D+ switching.
+
+Required properties:
+- compatible: Should be "richtek,rt8973a-muic"
+- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from rt8973a are delivered to.
+- interrupts: Interrupt specifiers for detection interrupt sources.
+
+Example:
+
+	rt8973a@14 {
+		compatible = "richtek,rt8973a-muic";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		reg = <0x14>;
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -150,6 +150,7 @@ winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics
 wm	Wondermedia Technologies, Inc.
 xes	Extreme Engineering Solutions (X-ES)
+xillybus	Xillybus Ltd.
 xlnx	Xilinx
 zyxel	ZyXEL Communications Corp.
 zarlink	Zarlink Semiconductor

drivers/char/i8k.c

@@ -651,6 +651,7 @@ struct i8k_config_data {
 
 enum i8k_configs {
 	DELL_LATITUDE_D520,
+	DELL_LATITUDE_E6540,
 	DELL_PRECISION_490,
 	DELL_STUDIO,
 	DELL_XPS_M140,
@@ -661,6 +662,10 @@ static const struct i8k_config_data i8k_config_data[] = {
 		.fan_mult = 1,
 		.fan_max = I8K_FAN_TURBO,
 	},
+	[DELL_LATITUDE_E6540] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_HIGH,
+	},
 	[DELL_PRECISION_490] = {
 		.fan_mult = 1,
 		.fan_max = I8K_FAN_TURBO,
@@ -705,6 +710,14 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = {
 		},
 		.driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520],
 	},
+	{
+		.ident = "Dell Latitude E6540",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6540"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_LATITUDE_E6540],
+	},
 	{
 		.ident = "Dell Latitude 2",
 		.matches = {

drivers/char/xilinx_hwicap/xilinx_hwicap.c

@@ -843,7 +843,6 @@ static struct platform_driver hwicap_platform_driver = {
 	.probe = hwicap_drv_probe,
 	.remove = hwicap_drv_remove,
 	.driver = {
-		.owner = THIS_MODULE,
 		.name = DRIVER_NAME,
 		.of_match_table = hwicap_of_match,
 	},

drivers/extcon/Kconfig

@@ -70,8 +70,21 @@ config EXTCON_PALMAS
 	  Say Y here to enable support for USB peripheral and USB host
 	  detection by palmas usb.
 
+config EXTCON_RT8973A
+	tristate "RT8973A EXTCON support"
+	depends on I2C
+	select IRQ_DOMAIN
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Richtek RT8973A. The RT8973A is a USB port accessory detector
+	  and switch that is optimized to protect low voltage system
+	  from abnormal high input voltage (up to 28V).
+
 config EXTCON_SM5502
 	tristate "SM5502 EXTCON support"
+	depends on I2C
 	select IRQ_DOMAIN
 	select REGMAP_I2C
 	select REGMAP_IRQ

drivers/extcon/Makefile

@@ -10,4 +10,5 @@ obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
 obj-$(CONFIG_EXTCON_PALMAS)	+= extcon-palmas.o
+obj-$(CONFIG_EXTCON_RT8973A)	+= extcon-rt8973a.o
 obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o

drivers/extcon/extcon-gpio.c

@@ -20,16 +20,16 @@
  *
 */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
+#include <linux/extcon.h>
+#include <linux/extcon/extcon-gpio.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
-#include <linux/gpio.h>
-#include <linux/extcon.h>
-#include <linux/extcon/extcon-gpio.h>
 
 struct gpio_extcon_data {
 	struct extcon_dev *edev;

drivers/extcon/extcon-max77693.c

@@ -255,10 +255,14 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
 	case ADC_DEBOUNCE_TIME_10MS:
 	case ADC_DEBOUNCE_TIME_25MS:
 	case ADC_DEBOUNCE_TIME_38_62MS:
-		ret = regmap_update_bits(info->max77693->regmap_muic,
-					  MAX77693_MUIC_REG_CTRL3,
-					  CONTROL3_ADCDBSET_MASK,
-					  time << CONTROL3_ADCDBSET_SHIFT);
+		/*
+		 * Don't touch BTLDset, JIGset when you want to change adc
+		 * debounce time. If it writes other than 0 to BTLDset, JIGset
+		 * muic device will be reset and loose current state.
+		 */
+		ret = regmap_write(info->max77693->regmap_muic,
+				  MAX77693_MUIC_REG_CTRL3,
+				  time << CONTROL3_ADCDBSET_SHIFT);
 		if (ret) {
 			dev_err(info->dev, "failed to set ADC debounce time\n");
 			return ret;
@@ -1155,13 +1159,11 @@ static int max77693_muic_probe(struct platform_device *pdev)
 
 		virq = regmap_irq_get_virq(max77693->irq_data_muic,
 					muic_irq->irq);
-		if (!virq) {
-			ret = -EINVAL;
-			goto err_irq;
-		}
+		if (!virq)
+			return -EINVAL;
 		muic_irq->virq = virq;
 
-		ret = request_threaded_irq(virq, NULL,
+		ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
 				max77693_muic_irq_handler,
 				IRQF_NO_SUSPEND,
 				muic_irq->name, info);
@@ -1170,7 +1172,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
 				"failed: irq request (IRQ: %d,"
 				" error :%d)\n",
 				muic_irq->irq, ret);
-			goto err_irq;
+			return ret;
 		}
 	}
 
@@ -1179,15 +1181,14 @@ static int max77693_muic_probe(struct platform_device *pdev)
 					      max77693_extcon_cable);
 	if (IS_ERR(info->edev)) {
 		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
-		ret = -ENOMEM;
-		goto err_irq;
+		return -ENOMEM;
 	}
 	info->edev->name = DEV_NAME;
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");
-		goto err_irq;
+		return ret;
 	}
 
 	/* Initialize MUIC register by using platform data or default data */
@@ -1265,7 +1266,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
 			MAX77693_MUIC_REG_ID, &id);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to read revision number\n");
-		goto err_irq;
+		return ret;
 	}
 	dev_info(info->dev, "device ID : 0x%x\n", id);
 
@@ -1285,20 +1286,12 @@ static int max77693_muic_probe(struct platform_device *pdev)
 			delay_jiffies);
 
 	return ret;
-
-err_irq:
-	while (--i >= 0)
-		free_irq(muic_irqs[i].virq, info);
-	return ret;
 }
 
 static int max77693_muic_remove(struct platform_device *pdev)
 {
 	struct max77693_muic_info *info = platform_get_drvdata(pdev);
-	int i;
 
-	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
-		free_irq(muic_irqs[i].virq, info);
 	cancel_work_sync(&info->irq_work);
 	input_unregister_device(info->dock);