drm/i915/kbl: Introduce Kabylake platform defition.

Kabylake is a Intel® Processor containing Intel® HD Graphics
following Skylake.

It is Gen9p5, so it inherits everything from Skylake.

Let's start by adding the platform separated from Skylake
but reusing most of all features, functions etc. Later we
rebase the PCI-ID patch without is_skylake=1
so we don't replace what original Author did there.

Few IS_SKYLAKEs if statements are not being covered by this patch
on purpose:
   - Workarounds: Kabylake is derivated from Skylake H0 so no
     		  W/As apply here.
   - GuC: A following patch removes Kabylake support with an
     	  explanation: No firmware available yet.
   - DMC/CSR: Done in a separated patch since we need to be carefull
     	      and load the version for revision 7 since
	      Kabylake is Skylake H0.

v2: relative cleaner commit message and added the missed
    IS_KABYLAKE to intel_i2c.c as pointed out by Jani.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drivers/gpu/drm/i915/i915_debugfs.c

@@ -1253,18 +1253,21 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 
 		max_freq = (IS_BROXTON(dev) ? rp_state_cap >> 0 :
 			    rp_state_cap >> 16) & 0xff;
-		max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
+		max_freq *= (IS_SKYLAKE(dev) || IS_KABYLAKE(dev) ?
+			     GEN9_FREQ_SCALER : 1);
 		seq_printf(m, "Lowest (RPN) frequency: %dMHz\n",
 			   intel_gpu_freq(dev_priv, max_freq));
 
 		max_freq = (rp_state_cap & 0xff00) >> 8;
-		max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
+		max_freq *= (IS_SKYLAKE(dev) || IS_KABYLAKE(dev) ?
+			     GEN9_FREQ_SCALER : 1);
 		seq_printf(m, "Nominal (RP1) frequency: %dMHz\n",
 			   intel_gpu_freq(dev_priv, max_freq));
 
 		max_freq = (IS_BROXTON(dev) ? rp_state_cap >> 16 :
 			    rp_state_cap >> 0) & 0xff;
-		max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
+		max_freq *= (IS_SKYLAKE(dev) || IS_KABYLAKE(dev) ?
+			     GEN9_FREQ_SCALER : 1);
 		seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n",
 			   intel_gpu_freq(dev_priv, max_freq));
 		seq_printf(m, "Max overclocked frequency: %dMHz\n",
@@ -1802,7 +1805,7 @@ static int i915_ring_freq_table(struct seq_file *m, void *unused)
 	if (ret)
 		goto out;
 
-	if (IS_SKYLAKE(dev)) {
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
 		/* Convert GT frequency to 50 HZ units */
 		min_gpu_freq =
 			dev_priv->rps.min_freq_softlimit / GEN9_FREQ_SCALER;
@@ -1822,7 +1825,8 @@ static int i915_ring_freq_table(struct seq_file *m, void *unused)
 				       &ia_freq);
 		seq_printf(m, "%d\t\t%d\t\t\t\t%d\n",
 			   intel_gpu_freq(dev_priv, (gpu_freq *
-				(IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1))),
+				(IS_SKYLAKE(dev) || IS_KABYLAKE(dev) ?
+				 GEN9_FREQ_SCALER : 1))),
 			   ((ia_freq >> 0) & 0xff) * 100,
 			   ((ia_freq >> 8) & 0xff) * 100);
 	}
@@ -5030,7 +5034,7 @@ static void gen9_sseu_device_status(struct drm_device *dev,
 
 		stat->slice_total++;
 
-		if (IS_SKYLAKE(dev))
+		if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 			ss_cnt = INTEL_INFO(dev)->subslice_per_slice;
 
 		for (ss = 0; ss < ss_max; ss++) {

drivers/gpu/drm/i915/i915_dma.c

@@ -697,7 +697,8 @@ static void gen9_sseu_info_init(struct drm_device *dev)
 	 * supports EU power gating on devices with more than one EU
 	 * pair per subslice.
 	*/
-	info->has_slice_pg = (IS_SKYLAKE(dev) && (info->slice_total > 1));
+	info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
+			       (info->slice_total > 1));
 	info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
 	info->has_eu_pg = (info->eu_per_subslice > 2);
 }

drivers/gpu/drm/i915/i915_drv.c

@@ -395,6 +395,36 @@ static const struct intel_device_info intel_broxton_info = {
 	IVB_CURSOR_OFFSETS,
 };
 
+static const struct intel_device_info intel_kabylake_info = {
+	.is_preliminary = 1,
+	.is_kabylake = 1,
+	.gen = 9,
+	.num_pipes = 3,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.has_llc = 1,
+	.has_ddi = 1,
+	.has_fpga_dbg = 1,
+	.has_fbc = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+	IVB_CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_kabylake_gt3_info = {
+	.is_preliminary = 1,
+	.is_kabylake = 1,
+	.gen = 9,
+	.num_pipes = 3,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+	.has_llc = 1,
+	.has_ddi = 1,
+	.has_fpga_dbg = 1,
+	.has_fbc = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+	IVB_CURSOR_OFFSETS,
+};
+
 /*
  * Make sure any device matches here are from most specific to most
  * general.  For example, since the Quanta match is based on the subsystem
@@ -461,7 +491,7 @@ static enum intel_pch intel_virt_detect_pch(struct drm_device *dev)
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		ret = PCH_LPT;
 		DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
-	} else if (IS_SKYLAKE(dev)) {
+	} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
 		ret = PCH_SPT;
 		DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
 	}
@@ -524,11 +554,13 @@ void intel_detect_pch(struct drm_device *dev)
 			} else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
 				dev_priv->pch_type = PCH_SPT;
 				DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
-				WARN_ON(!IS_SKYLAKE(dev));
+				WARN_ON(!IS_SKYLAKE(dev) &&
+					!IS_KABYLAKE(dev));
 			} else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
 				dev_priv->pch_type = PCH_SPT;
 				DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
-				WARN_ON(!IS_SKYLAKE(dev));
+				WARN_ON(!IS_SKYLAKE(dev) &&
+					!IS_KABYLAKE(dev));
 			} else if (id == INTEL_PCH_P2X_DEVICE_ID_TYPE) {
 				dev_priv->pch_type = intel_virt_detect_pch(dev);
 			} else
@@ -836,7 +868,7 @@ static int i915_drm_resume_early(struct drm_device *dev)
 
 	if (IS_BROXTON(dev))
 		ret = bxt_resume_prepare(dev_priv);
-	else if (IS_SKYLAKE(dev_priv))
+	else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
 		ret = skl_resume_prepare(dev_priv);
 	else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
 		hsw_disable_pc8(dev_priv);
@@ -1583,7 +1615,7 @@ static int intel_runtime_resume(struct device *device)
 
 	if (IS_BROXTON(dev))
 		ret = bxt_resume_prepare(dev_priv);
-	else if (IS_SKYLAKE(dev))
+	else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 		ret = skl_resume_prepare(dev_priv);
 	else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
 		hsw_disable_pc8(dev_priv);
@@ -1627,7 +1659,7 @@ static int intel_suspend_complete(struct drm_i915_private *dev_priv)
 
 	if (IS_BROXTON(dev_priv))
 		ret = bxt_suspend_complete(dev_priv);
-	else if (IS_SKYLAKE(dev_priv))
+	else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
 		ret = skl_suspend_complete(dev_priv);
 	else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
 		ret = hsw_suspend_complete(dev_priv);

drivers/gpu/drm/i915/i915_drv.h

@@ -766,6 +766,7 @@ struct intel_csr {
 	func(is_haswell) sep \
 	func(is_skylake) sep \
 	func(is_broxton) sep \
+	func(is_kabylake) sep \
 	func(is_preliminary) sep \
 	func(has_fbc) sep \
 	func(has_pipe_cxsr) sep \
@@ -2478,6 +2479,7 @@ struct drm_i915_cmd_table {
 #define IS_BROADWELL(dev)	(!INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev))
 #define IS_SKYLAKE(dev)	(INTEL_INFO(dev)->is_skylake)
 #define IS_BROXTON(dev)		(INTEL_INFO(dev)->is_broxton)
+#define IS_KABYLAKE(dev)	(INTEL_INFO(dev)->is_kabylake)
 #define IS_MOBILE(dev)		(INTEL_INFO(dev)->is_mobile)
 #define IS_HSW_EARLY_SDV(dev)	(IS_HASWELL(dev) && \
 				 (INTEL_DEVID(dev) & 0xFF00) == 0x0C00)
@@ -2598,10 +2600,10 @@ struct drm_i915_cmd_table {
 #define HAS_FPGA_DBG_UNCLAIMED(dev)	(INTEL_INFO(dev)->has_fpga_dbg)
 #define HAS_PSR(dev)		(IS_HASWELL(dev) || IS_BROADWELL(dev) || \
 				 IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || \
-				 IS_SKYLAKE(dev))
+				 IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 #define HAS_RUNTIME_PM(dev)	(IS_GEN6(dev) || IS_HASWELL(dev) || \
 				 IS_BROADWELL(dev) || IS_VALLEYVIEW(dev) || \
-				 IS_SKYLAKE(dev))
+				 IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 #define HAS_RC6(dev)		(INTEL_INFO(dev)->gen >= 6)
 #define HAS_RC6p(dev)		(INTEL_INFO(dev)->gen == 6 || IS_IVYBRIDGE(dev))
 

drivers/gpu/drm/i915/i915_gem_stolen.c

@@ -433,7 +433,8 @@ int i915_gem_init_stolen(struct drm_device *dev)
 					 &reserved_size);
 		break;
 	default:
-		if (IS_BROADWELL(dev_priv) || IS_SKYLAKE(dev_priv))
+		if (IS_BROADWELL(dev_priv) ||
+		    IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev))
 			bdw_get_stolen_reserved(dev_priv, &reserved_base,
 						&reserved_size);
 		else

drivers/gpu/drm/i915/intel_audio.c

@@ -591,7 +591,7 @@ static void i915_audio_component_codec_wake_override(struct device *dev,
 	struct drm_i915_private *dev_priv = dev_to_i915(dev);
 	u32 tmp;
 
-	if (!IS_SKYLAKE(dev_priv))
+	if (!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv))
 		return;
 
 	/*
@@ -642,10 +642,11 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
 	u32 tmp;
 	int n;
 
-	/* HSW, BDW SKL need this fix */
+	/* HSW, BDW, SKL, KBL need this fix */
 	if (!IS_SKYLAKE(dev_priv) &&
-		!IS_BROADWELL(dev_priv) &&
-		!IS_HASWELL(dev_priv))
+	    !IS_KABYLAKE(dev_priv) &&
+	    !IS_BROADWELL(dev_priv) &&
+	    !IS_HASWELL(dev_priv))
 		return 0;
 
 	mutex_lock(&dev_priv->av_mutex);

drivers/gpu/drm/i915/intel_ddi.c

@@ -448,7 +448,7 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port,
 		bxt_ddi_vswing_sequence(dev, hdmi_level, port,
 					INTEL_OUTPUT_HDMI);
 		return;
-	} else if (IS_SKYLAKE(dev)) {
+	} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
 		ddi_translations_fdi = NULL;
 		ddi_translations_dp =
 				skl_get_buf_trans_dp(dev, &n_dp_entries);
@@ -1184,7 +1184,7 @@ void intel_ddi_clock_get(struct intel_encoder *encoder,
 
 	if (INTEL_INFO(dev)->gen <= 8)
 		hsw_ddi_clock_get(encoder, pipe_config);
-	else if (IS_SKYLAKE(dev))
+	else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 		skl_ddi_clock_get(encoder, pipe_config);
 	else if (IS_BROXTON(dev))
 		bxt_ddi_clock_get(encoder, pipe_config);
@@ -1768,7 +1768,7 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc,
 	struct intel_encoder *intel_encoder =
 		intel_ddi_get_crtc_new_encoder(crtc_state);
 
-	if (IS_SKYLAKE(dev))
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 		return skl_ddi_pll_select(intel_crtc, crtc_state,
 					  intel_encoder);
 	else if (IS_BROXTON(dev))
@@ -2251,7 +2251,7 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp)
 
 	level = translate_signal_level(signal_levels);
 
-	if (IS_SKYLAKE(dev))
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 		skl_ddi_set_iboost(dev, level, port, encoder->type);
 	else if (IS_BROXTON(dev))
 		bxt_ddi_vswing_sequence(dev, level, port, encoder->type);
@@ -2274,7 +2274,7 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
 		intel_edp_panel_on(intel_dp);
 	}
 
-	if (IS_SKYLAKE(dev)) {
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
 		uint32_t dpll = crtc->config->ddi_pll_sel;
 		uint32_t val;
 
@@ -2369,7 +2369,7 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
 		intel_edp_panel_off(intel_dp);
 	}
 
-	if (IS_SKYLAKE(dev))
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 		I915_WRITE(DPLL_CTRL2, (I915_READ(DPLL_CTRL2) |
 					DPLL_CTRL2_DDI_CLK_OFF(port)));
 	else if (INTEL_INFO(dev)->gen < 9)
@@ -2937,14 +2937,14 @@ void intel_ddi_pll_init(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t val = I915_READ(LCPLL_CTL);
 
-	if (IS_SKYLAKE(dev))
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 		skl_shared_dplls_init(dev_priv);
 	else if (IS_BROXTON(dev))
 		bxt_shared_dplls_init(dev_priv);
 	else
 		hsw_shared_dplls_init(dev_priv);
 
-	if (IS_SKYLAKE(dev)) {
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
 		int cdclk_freq;
 
 		cdclk_freq = dev_priv->display.get_display_clock_speed(dev);

drivers/gpu/drm/i915/intel_display.c

@@ -5292,7 +5292,7 @@ static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_SKYLAKE(dev)) {
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
 		u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
 
 		if (limit == SKL_DFSM_CDCLK_LIMIT_675)
@@ -9738,7 +9738,7 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
 
 	port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
 
-	if (IS_SKYLAKE(dev))
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 		skylake_get_ddi_pll(dev_priv, port, pipe_config);
 	else if (IS_BROXTON(dev))
 		bxt_get_ddi_pll(dev_priv, port, pipe_config);
@@ -12022,7 +12022,7 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 			      pipe_config->dpll_hw_state.pll9,
 			      pipe_config->dpll_hw_state.pll10,
 			      pipe_config->dpll_hw_state.pcsdw12);
-	} else if (IS_SKYLAKE(dev)) {
+	} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
 		DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
 			      "ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
 			      pipe_config->ddi_pll_sel,
@@ -14081,7 +14081,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 		 */
 		found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
 		/* WaIgnoreDDIAStrap: skl */
-		if (found || IS_SKYLAKE(dev))
+		if (found || IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 			intel_ddi_init(dev, PORT_A);
 
 		/* DDI B, C and D detection is indicated by the SFUSE_STRAP
@@ -14097,7 +14097,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 		/*
 		 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
 		 */
-		if (IS_SKYLAKE(dev) &&
+		if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
 		    (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
 		     dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
 		     dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
@@ -14537,7 +14537,7 @@ static void intel_init_display(struct drm_device *dev)
 	}
 
 	/* Returns the core display clock speed */
-	if (IS_SKYLAKE(dev))
+	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
 		dev_priv->display.get_display_clock_speed =
 			skylake_get_display_clock_speed;
 	else if (IS_BROXTON(dev))

drivers/gpu/drm/i915/intel_dp.c

@@ -1023,7 +1023,7 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
 	/* On SKL we don't have Aux for port E so we rely on VBT to set
 	 * a proper alternate aux channel.
 	 */
-	if (IS_SKYLAKE(dev) && port == PORT_E) {
+	if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) && port == PORT_E) {
 		switch (info->alternate_aux_channel) {
 		case DP_AUX_B:
 			porte_aux_ctl_reg = DPB_AUX_CH_CTL;
@@ -1210,7 +1210,7 @@ intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
 	if (IS_BROXTON(dev)) {
 		*source_rates = bxt_rates;
 		size = ARRAY_SIZE(bxt_rates);
-	} else if (IS_SKYLAKE(dev)) {
+	} else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
 		*source_rates = skl_rates;
 		size = ARRAY_SIZE(skl_rates);
 	} else {
@@ -1530,7 +1530,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 				&pipe_config->dp_m2_n2);
 	}
 
-	if (IS_SKYLAKE(dev) && is_edp(intel_dp))
+	if ((IS_SKYLAKE(dev)  || IS_KABYLAKE(dev)) && is_edp(intel_dp))
 		skl_edp_set_pll_config(pipe_config);
 	else if (IS_BROXTON(dev))
 		/* handled in ddi */;

drivers/gpu/drm/i915/intel_fbc.c

@@ -581,7 +581,8 @@ static int find_compression_threshold(struct drm_i915_private *dev_priv,
 	 * reserved range size, so it always assumes the maximum (8mb) is used.
 	 * If we enable FBC using a CFB on that memory range we'll get FIFO
 	 * underruns, even if that range is not reserved by the BIOS. */
-	if (IS_BROADWELL(dev_priv) || IS_SKYLAKE(dev_priv))
+	if (IS_BROADWELL(dev_priv) ||
+	    IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
 		end = dev_priv->gtt.stolen_size - 8 * 1024 * 1024;
 	else
 		end = dev_priv->gtt.stolen_usable_size;

drivers/gpu/drm/i915/intel_i2c.c

@@ -74,7 +74,7 @@ static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *dev_priv,
 {
 	if (IS_BROXTON(dev_priv))
 		return &gmbus_pins_bxt[pin];
-	else if (IS_SKYLAKE(dev_priv))
+	else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
 		return &gmbus_pins_skl[pin];
 	else if (IS_BROADWELL(dev_priv))
 		return &gmbus_pins_bdw[pin];
@@ -89,7 +89,7 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
 
 	if (IS_BROXTON(dev_priv))
 		size = ARRAY_SIZE(gmbus_pins_bxt);
-	else if (IS_SKYLAKE(dev_priv))
+	else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
 		size = ARRAY_SIZE(gmbus_pins_skl);
 	else if (IS_BROADWELL(dev_priv))
 		size = ARRAY_SIZE(gmbus_pins_bdw);