pinctrl: rockchip: enable clock when reading pin direction register

[ Upstream commit 5c9d8c4 ]

We generally leave the GPIO clock disabled, unless an interrupt is
requested or we're accessing IO registers. We forgot to do this for the
->get_direction() callback, which means we can sometimes [1] get
incorrect results [2] from, e.g., /sys/kernel/debug/gpio.

Enable the clock, so we get the right results!

[1] Sometimes, because many systems have 1 or mor interrupt requested on
each GPIO bank, so they always leave their clock on.

[2] Incorrect, meaning the register returns 0, and so we interpret that
as "input".

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/pinctrl/pinctrl-rockchip.c

@@ -1278,8 +1278,16 @@ static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 {
 	struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
 	u32 data;
+	int ret;
 
+	ret = clk_enable(bank->clk);
+	if (ret < 0) {
+		dev_err(bank->drvdata->dev,
+			"failed to enable clock for bank %s\n", bank->name);
+		return ret;
+	}
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+	clk_disable(bank->clk);
 
 	return !(data & BIT(offset));
 }