Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/input/event-codes.txt

@@ -281,6 +281,19 @@ gestures can normally be extracted from it.
 If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
 device.
 
+INPUT_PROP_TOPBUTTONPAD:
+-----------------------
+Some laptops, most notably the Lenovo *40 series provide a trackstick
+device but do not have physical buttons associated with the trackstick
+device. Instead, the top area of the touchpad is marked to show
+visual/haptic areas for left, middle, right buttons intended to be used
+with the trackstick.
+
+If INPUT_PROP_TOPBUTTONPAD is set, userspace should emulate buttons
+accordingly. This property does not affect kernel behavior.
+The kernel does not provide button emulation for such devices but treats
+them as any other INPUT_PROP_BUTTONPAD device.
+
 Guidelines:
 ==========
 The guidelines below ensure proper single-touch and multi-finger functionality.

MAINTAINERS

@@ -6961,6 +6961,12 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pinctrl/pinctrl-at91.c
 
+PIN CONTROLLER - RENESAS
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	linux-sh@vger.kernel.org
+S:	Maintained
+F:	drivers/pinctrl/sh-pfc/
+
 PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <t.figa@samsung.com>
 M:	Thomas Abraham <thomas.abraham@linaro.org>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 16
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*
@@ -688,6 +688,8 @@ KBUILD_CFLAGS	+= -fomit-frame-pointer
 endif
 endif
 
+KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
+
 ifdef CONFIG_DEBUG_INFO
 KBUILD_CFLAGS	+= -g
 KBUILD_AFLAGS	+= -Wa,-gdwarf-2

arch/arm/boot/dts/hi3620.dtsi

@@ -73,7 +73,7 @@
 
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
-			reg = <0xfc10000 0x100000>;
+			reg = <0x100000 0x100000>;
 			interrupts = <0 15 4>;
 			cache-unified;
 			cache-level = <2>;

arch/arm/boot/dts/omap3-n900.dts

@@ -353,7 +353,7 @@
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		compatible = "ti,twl4030-power-n900";
 		ti,use_poweroff;
 	};
 };

arch/arm/boot/dts/r8a7791.dtsi

@@ -540,9 +540,9 @@
 			#clock-cells = <0>;
 			clock-output-names = "sd1";
 		};
-		sd2_clk: sd3_clk@e615007c {
+		sd2_clk: sd3_clk@e615026c {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
+			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "sd2";

arch/arm/crypto/aesbs-glue.c

@@ -137,7 +137,7 @@ static int aesbs_cbc_encrypt(struct blkcipher_desc *desc,
 				dst += AES_BLOCK_SIZE;
 			} while (--blocks);
 		}
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -158,7 +158,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
 		bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->dec, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	while (walk.nbytes) {
 		u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
@@ -182,7 +182,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
 			dst += AES_BLOCK_SIZE;
 			src += AES_BLOCK_SIZE;
 		} while (--blocks);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -268,7 +268,7 @@ static int aesbs_xts_encrypt(struct blkcipher_desc *desc,
 		bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->enc, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -292,7 +292,7 @@ static int aesbs_xts_decrypt(struct blkcipher_desc *desc,
 		bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->dec, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }

arch/arm/include/asm/mach/arch.h

@@ -50,6 +50,7 @@ struct machine_desc {
 	struct smp_operations	*smp;		/* SMP operations	*/
 	bool			(*smp_init)(void);
 	void			(*fixup)(struct tag *, char **);
+	void			(*dt_fixup)(void);
 	void			(*init_meminfo)(void);
 	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/

arch/arm/kernel/devtree.c

@@ -212,7 +212,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
-	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys)))
+	if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
@@ -237,6 +237,12 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 		dump_machine_table(); /* does not return */
 	}
 
+	/* We really don't want to do this, but sometimes firmware provides buggy data */
+	if (mdesc->dt_fixup)
+		mdesc->dt_fixup();
+
+	early_init_dt_scan_nodes();
+
 	/* Change machine number to match the mdesc we're using */
 	__machine_arch_type = mdesc->nr;
 

arch/arm/mach-exynos/exynos.c

@@ -335,6 +335,15 @@ static void __init exynos_reserve(void)
 #endif
 }
 
+static void __init exynos_dt_fixup(void)
+{
+	/*
+	 * Some versions of uboot pass garbage entries in the memory node,
+	 * use the old CONFIG_ARM_NR_BANKS
+	 */
+	of_fdt_limit_memory(8);
+}
+
 DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
@@ -348,4 +357,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	.dt_compat	= exynos_dt_compat,
 	.restart	= exynos_restart,
 	.reserve	= exynos_reserve,
+	.dt_fixup	= exynos_dt_fixup,
 MACHINE_END

arch/arm/mach-omap2/gpmc-nand.c

@@ -50,21 +50,23 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 		 soc_is_omap54xx() || soc_is_dra7xx())
 		return 1;
 
+	if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
+		 ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
+		if (cpu_is_omap24xx())
+			return 0;
+		else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
+			return 0;
+		else
+			return 1;
+	}
+
 	/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
 	 * which require H/W based ECC error detection */
 	if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
 	    ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
 		 (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
 		return 0;
 
-	/*
-	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
-	 * and AM33xx derivates. Other chips may be added if confirmed to work.
-	 */
-	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) &&
-	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)))
-		return 0;
-
 	/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
 	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
 		return 1;

arch/arm/mach-omap2/omap4-common.c

@@ -168,6 +168,10 @@ static void omap4_l2c310_write_sec(unsigned long val, unsigned reg)
 		smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX;
 		break;
 
+	case L310_POWER_CTRL:
+		pr_info_once("OMAP L2C310: ROM does not support power control setting\n");
+		return;
+
 	default:
 		WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg);
 		return;

arch/arm/xen/grant-table.c

@@ -51,3 +51,8 @@ int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes,
 {
 	return -ENOSYS;
 }
+
+int arch_gnttab_init(unsigned long nr_shared, unsigned long nr_status)
+{
+	return 0;
+}

arch/arm64/crypto/aes-glue.c

@@ -106,7 +106,7 @@ static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) {
 		aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key_enc, rounds, blocks, first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 	return err;
@@ -128,7 +128,7 @@ static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) {
 		aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key_dec, rounds, blocks, first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 	return err;
@@ -151,7 +151,7 @@ static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key_enc, rounds, blocks, walk.iv,
 				first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 	return err;
@@ -174,7 +174,7 @@ static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key_dec, rounds, blocks, walk.iv,
 				first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 	return err;
@@ -243,7 +243,7 @@ static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key1.key_enc, rounds, blocks,
 				(u8 *)ctx->key2.key_enc, walk.iv, first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 
@@ -267,7 +267,7 @@ static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key1.key_dec, rounds, blocks,
 				(u8 *)ctx->key2.key_enc, walk.iv, first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 

arch/arm64/mm/init.c

@@ -60,6 +60,17 @@ static int __init early_initrd(char *p)
 early_param("initrd", early_initrd);
 #endif
 
+/*
+ * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
+ * currently assumes that for memory starting above 4G, 32-bit devices will
+ * use a DMA offset.
+ */
+static phys_addr_t max_zone_dma_phys(void)
+{
+	phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32);
+	return min(offset + (1ULL << 32), memblock_end_of_DRAM());
+}
+
 static void __init zone_sizes_init(unsigned long min, unsigned long max)
 {
 	struct memblock_region *reg;
@@ -70,9 +81,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 
 	/* 4GB maximum for 32-bit only capable devices */
 	if (IS_ENABLED(CONFIG_ZONE_DMA)) {
-		unsigned long max_dma_phys =
-			(unsigned long)(dma_to_phys(NULL, DMA_BIT_MASK(32)) + 1);
-		max_dma = max(min, min(max, max_dma_phys >> PAGE_SHIFT));
+		max_dma = PFN_DOWN(max_zone_dma_phys());
 		zone_size[ZONE_DMA] = max_dma - min;
 	}
 	zone_size[ZONE_NORMAL] = max - max_dma;
@@ -146,7 +155,7 @@ void __init arm64_memblock_init(void)
 
 	/* 4GB maximum for 32-bit only capable devices */
 	if (IS_ENABLED(CONFIG_ZONE_DMA))
-		dma_phys_limit = dma_to_phys(NULL, DMA_BIT_MASK(32)) + 1;
+		dma_phys_limit = max_zone_dma_phys();
 	dma_contiguous_reserve(dma_phys_limit);
 
 	memblock_allow_resize();

arch/blackfin/configs/BF609-EZKIT_defconfig

@@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN_V3=y
+CONFIG_SPI_ADI_V3=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set

arch/blackfin/kernel/vmlinux.lds.S

@@ -145,7 +145,7 @@ SECTIONS
 
 	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
 #else
-	.init.data : AT(__data_lma + __data_len)
+	.init.data : AT(__data_lma + __data_len + 32)
 	{
 		__sinitdata = .;
 		INIT_DATA

arch/blackfin/mach-bf533/boards/blackstamp.c

@@ -20,6 +20,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>

arch/blackfin/mach-bf537/boards/cm_bf537e.c

@@ -21,6 +21,7 @@
 #endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>

arch/blackfin/mach-bf537/boards/cm_bf537u.c

@@ -21,6 +21,7 @@
 #endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>

arch/blackfin/mach-bf537/boards/tcm_bf537.c

@@ -21,6 +21,7 @@
 #endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -2118,7 +2118,7 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary",  "pinctrl-adi2.0", NULL, "rotary"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0",  "pinctrl-adi2.0", NULL, "can0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1",  "pinctrl-adi2.0", NULL, "can1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043",  "pinctrl-adi2.0", NULL, "ppi0_24b"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043",  "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0",  "pinctrl-adi2.0", NULL, "sport0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0",  "pinctrl-adi2.0", NULL, "sport0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0",  "pinctrl-adi2.0", NULL, "sport0"),
@@ -2140,7 +2140,9 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x",  "pinctrl-adi2.0", NULL, "atapi_alter"),
 #endif
 	PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0",  "pinctrl-adi2.0", NULL, "nfc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys",  "pinctrl-adi2.0", NULL, "keys_4x4"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys",  "pinctrl-adi2.0", "keys_4x4grp", "keys"),
+	PIN_MAP_MUX_GROUP("bf54x-keys", "4bit",  "pinctrl-adi2.0", "keys_4x4grp", "keys"),
+	PIN_MAP_MUX_GROUP("bf54x-keys", "8bit",  "pinctrl-adi2.0", "keys_8x8grp", "keys"),
 };
 
 static int __init ezkit_init(void)

arch/blackfin/mach-bf561/boards/acvilon.c

@@ -44,6 +44,7 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/jiffies.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/delay.h>