mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM

Prevent reading unsupported slave address from SFP EEPROM by testing
Diagnostic Monitoring Type byte in EEPROM. Read only page zero of
EEPROM, in case this byte is zero.

If some SFP transceiver does not support Digital Optical Monitoring
(DOM), reading SFP EEPROM slave address 0x51 could return an error.
Availability of DOM support is verified by reading from zero page
Diagnostic Monitoring Type byte describing how diagnostic monitoring is
implemented by transceiver. If bit 6 of this byte is set, it indicates
that digital diagnostic monitoring has been implemented. Otherwise it is
not and transceiver could fail to reply to transaction for slave address
0x51 [1010001X (A2h)], which is used to access measurements page.

Such issue has been observed when reading cable MCP2M00-xxxx,
MCP7F00-xxxx, and few others.

Fixes: 2ea1090 ("mlxsw: spectrum: Add support for access cable info via ethtool")
Fixes: 4400081 ("mlxsw: spectrum: Fix EEPROM access in case of SFP/SFP+")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw/core_env.c

@@ -3,6 +3,7 @@
 
 #include <linux/kernel.h>
 #include <linux/err.h>
+#include <linux/sfp.h>
 
 #include "core.h"
 #include "core_env.h"
@@ -162,7 +163,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module,
 {
 	u8 module_info[MLXSW_REG_MCIA_EEPROM_MODULE_INFO_SIZE];
 	u16 offset = MLXSW_REG_MCIA_EEPROM_MODULE_INFO_SIZE;
-	u8 module_rev_id, module_id;
+	u8 module_rev_id, module_id, diag_mon;
 	unsigned int read_size;
 	int err;
 
@@ -195,8 +196,21 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module,
 		}
 		break;
 	case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_SFP:
+		/* Verify if transceiver provides diagnostic monitoring page */
+		err = mlxsw_env_query_module_eeprom(mlxsw_core, module,
+						    SFP_DIAGMON, 1, &diag_mon,
+						    &read_size);
+		if (err)
+			return err;
+
+		if (read_size < 1)
+			return -EIO;
+
 		modinfo->type       = ETH_MODULE_SFF_8472;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		if (diag_mon)
+			modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		else
+			modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN / 2;
 		break;
 	default:
 		return -EINVAL;