Skip to content

Commit

Permalink
Revert "PCI: armada8k: Add support for gpio controlled reset signal"
Browse files Browse the repository at this point in the history
Revert commit 3d71746 ("PCI: armada8k: Add support for gpio controlled
reset signal").

That commit breaks boot on Macchiatobin board when a Mellanox NIC is
present in the PCIe slot.

It turns out that full reset cycle requires first comphy serdes
initialization. Reset signal toggle without comphy initialization makes
access to PCI configuration registers stall indefinitely. U-Boot toggles
the Macchiatobin PCIe reset line already at boot, after initializing the
comphy serdes.

So while commit 3d71746 ("PCI: armada8k: Add support for gpio controlled
reset signal") enables PCIe on platforms that U-Boot does not touch the
reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the
Macchiatobin board.

Revert commit 3d71746 ("PCI: armada8k: Add support for gpio controlled
reset signal") entirely to fix the Macchiatobin regression.

Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
  • Loading branch information
Baruch Siach authored and Bjorn Helgaas committed Jan 31, 2019
1 parent 432dd70 commit f14bcc0
Showing 1 changed file with 0 additions and 16 deletions.
16 changes: 0 additions & 16 deletions drivers/pci/controller/dwc/pcie-armada8k.c
Original file line number Diff line number Diff line change
@@ -22,15 +22,13 @@
#include <linux/resource.h>
#include <linux/of_pci.h>
#include <linux/of_irq.h>
#include <linux/gpio/consumer.h>

#include "pcie-designware.h"

struct armada8k_pcie {
struct dw_pcie *pci;
struct clk *clk;
struct clk *clk_reg;
struct gpio_desc *reset_gpio;
};

#define PCIE_VENDOR_REGS_OFFSET 0x8000
@@ -139,12 +137,6 @@ static int armada8k_pcie_host_init(struct pcie_port *pp)
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct armada8k_pcie *pcie = to_armada8k_pcie(pci);

if (pcie->reset_gpio) {
/* assert and then deassert the reset signal */
gpiod_set_value_cansleep(pcie->reset_gpio, 1);
msleep(100);
gpiod_set_value_cansleep(pcie->reset_gpio, 0);
}
dw_pcie_setup_rc(pp);
armada8k_pcie_establish_link(pcie);

@@ -257,14 +249,6 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
goto fail_clkreg;
}

/* Get reset gpio signal and hold asserted (logically high) */
pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(pcie->reset_gpio)) {
ret = PTR_ERR(pcie->reset_gpio);
goto fail_clkreg;
}

platform_set_drvdata(pdev, pcie);

ret = armada8k_add_pcie_port(pcie, pdev);

0 comments on commit f14bcc0

Please sign in to comment.