Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: remove needless double parenthesis
  sdhci: Specific quirk vor VIA SDHCI controller in VX855ES
  s3cmci: fix dma configuration call
  mmc: Add new via-sdmmc host controller driver
  sdhci: Add support for hosts that are only capable of 1-bit transfers
  MAINTAINERS: add myself as atmel-mci maintainer (sd/mmc interface)
  sdhci: Add SDHCI_QUIRK_NO_MULTIBLOCK quirk
  sdhci: Add better ADMA error reporting
  sdhci-s3c: Samsung S3C based SDHCI controller glue

Documentation/powerpc/dts-bindings/fsl/esdhc.txt

@@ -10,6 +10,8 @@ Required properties:
   - interrupts : should contain eSDHC interrupt.
   - interrupt-parent : interrupt source phandle.
   - clock-frequency : specifies eSDHC base clock frequency.
+  - sdhci,1-bit-only : (optional) specifies that a controller can
+    only handle 1-bit data transfers.
 
 Example:
 

MAINTAINERS

@@ -1010,6 +1010,13 @@ W:	http://www.at91.com/
 S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
+ATMEL AT91 / AT32 MCI DRIVER
+P:	Nicolas Ferre
+M:	nicolas.ferre@atmel.com
+S:	Maintained
+F:	drivers/mmc/host/atmel-mci.c
+F:	drivers/mmc/host/atmel-mci-regs.h
+
 ATMEL AT91 / AT32 SERIAL DRIVER
 P:	Haavard Skinnemoen
 M:	hskinnemoen@atmel.com
@@ -5094,6 +5101,13 @@ L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
+SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	sdhci-devel@lists.ossman.eu
+S:	Maintained
+F:	drivers/mmc/host/sdhci-s3c.c
+
 SECURITY SUBSYSTEM
 P:	James Morris
 M:	jmorris@namei.org
@@ -6216,6 +6230,14 @@ S:	Maintained
 F:	Documentation/i2c/busses/i2c-viapro
 F:	drivers/i2c/busses/i2c-viapro.c
 
+VIA SD/MMC CARD CONTROLLER DRIVER
+P:	Joseph Chan
+M:	JosephChan@via.com.tw
+P:	Harald Welte
+M:	HaraldWelte@viatech.com
+S:	Maintained
+F:	drivers/mmc/host/via-sdmmc.c
+
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
 P:	Joseph Chan
 M:	JosephChan@via.com.tw

drivers/mmc/host/Kconfig

@@ -94,6 +94,31 @@ config MMC_SDHCI_PLTFM
 
 	  If unsure, say N.
 
+config MMC_SDHCI_S3C
+	tristate "SDHCI support on Samsung S3C SoC"
+	depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX)
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  often referrered to as the HSMMC block in some of the Samsung S3C
+	  range of SoC.
+
+	  Note, due to the problems with DMA, the DMA support is only
+	  available with CONFIG_EXPERIMENTAL is selected.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_S3C_DMA
+	bool "DMA support on S3C SDHCI"
+	depends on MMC_SDHCI_S3C && EXPERIMENTAL
+	help
+	  Enable DMA support on the Samsung S3C SDHCI glue. The DMA
+	  has proved to be problematic if the controller encounters
+	  certain errors, and thus should be treated with care.
+
+	  YMMV.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -265,3 +290,14 @@ config MMC_CB710
 	  This driver can also be built as a module. If so, the module
 	  will be called cb710-mmc.
 
+config MMC_VIA_SDMMC
+	tristate "VIA SD/MMC Card Reader Driver"
+	depends on PCI
+	help
+	  This selects the VIA SD/MMC Card Reader driver, say Y or M here.
+	  VIA provides one multi-functional card reader which integrated into
+	  some motherboards manufactured by VIA. This card reader supports
+	  SD/MMC/SDHC.
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.

drivers/mmc/host/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
 obj-$(CONFIG_MMC_SDHCI_PLTFM)	+= sdhci-pltfm.o
+obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
@@ -31,6 +32,7 @@ obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
 obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
+obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG

drivers/mmc/host/s3cmci.c

@@ -794,7 +794,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
-		s3c2410_dma_config(host->dma, 4, 0);
+		s3c2410_dma_config(host->dma, 4);
 		s3c2410_dma_set_buffdone_fn(host->dma,
 					    s3cmci_dma_done_callback);
 		s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);

drivers/mmc/host/sdhci-of.c

@@ -250,6 +250,9 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev,
 		host->ops = &sdhci_of_data->ops;
 	}
 
+	if (of_get_property(np, "sdhci,1-bit-only", NULL))
+		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+
 	clk = of_get_property(np, "clock-frequency", &size);
 	if (clk && size == sizeof(*clk) && *clk)
 		of_host->clock = *clk;

drivers/mmc/host/sdhci-pci.c

@@ -284,6 +284,18 @@ static const struct sdhci_pci_fixes sdhci_jmicron = {
 	.resume		= jmicron_resume,
 };
 
+static int via_probe(struct sdhci_pci_chip *chip)
+{
+	if (chip->pdev->revision == 0x10)
+		chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
+
+	return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_via = {
+	.probe		= via_probe,
+};
+
 static const struct pci_device_id pci_ids[] __devinitdata = {
 	{
 		.vendor		= PCI_VENDOR_ID_RICOH,
@@ -349,6 +361,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.driver_data	= (kernel_ulong_t)&sdhci_jmicron,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_VIA,
+		.device		= 0x95d0,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_via,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},