Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking update from David Miller:

 1) Pairing and deadlock fixes in bluetooth from Johan Hedberg.

 2) Add device IDs for AR3011 and AR3012 bluetooth chips.  From
    Giancarlo Formicuccia and Marek Vasut.

 3) Fix wireless regulatory deadlock, from Eliad Peller.

 4) Fix full TX ring panic in bnx2x driver, from Eric Dumazet.

 5) Revert the two commits that added skb_orphan_try(), it causes
    erratic bonding behavior with UDP clients and the gains it used to
    give are mostly no longer happening due to how BQL works.  From Eric
    Dumazet.

 6) It took two tries, but Thomas Graf fixed a problem wherein we
    registered ipv6 routing procfs files before their backend data were
    initialized properly.

 7) Fix max GSO size setting in be2net, from Sarveshwar Bandi.

 8) PHY device id mask is wrong for KSZ9021 and KS8001 chips, fix from
    Jason Wang.

 9) Fix use of stale SKB data pointer after skb_linearize() call in
    batman-adv, from Antonio Quartulli.

10) Fix memory leak in IXGBE due to missing __GFP_COMP, from Alexander
    Duyck.

11) Fix probing of Gobi devices in qmi_wwan usbnet driver, from Bjørn
    Mork.

12) Fix suspend/resume and open failure handling in usbnet from Ming
    Lei.

13) Attempt to fix device r8169 hangs for certain chips, from Francois
    Romieu.

14) Fix advancement of RX dirty pointer in some situations in sh_eth
    driver, from Yoshihiro Shimoda.

15) Attempt to fix restart of IPV6 routing table dumps when there is an
    intervening table update.  From Eric Dumazet.

16) Respect security_inet_conn_request() return value in ipv6 TCP.  From
    Neal Cardwell.

17) Add another iPAD device ID to ipheth driver, from Davide Gerhard.

18) Fix access to freed SKB in l2tp_eth_dev_xmit(), and fix l2tp lockdep
    splats, from Eric Dumazet.

19) Make sure all bridge devices, regardless of whether they were
    created via netlink or ioctls, have their rtnetlink ops hooked up.
    From Thomas Graf and Stephen Hemminger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  9p: fix min_t() casting in p9pdu_vwritef()
  can: flexcan: use be32_to_cpup to handle the value of dt entry
  xen/netfront: teardown the device before unregistering it.
  bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)
  vhost: use USER_DS in vhost_worker thread
  ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP
  net: l2tp_eth: use LLTX to avoid LOCKDEP splats
  mac802154: add missed braces
  net: l2tp_eth: fix l2tp_eth_dev_xmit race
  net/mlx4_en: Release QP range in free_resources
  net/mlx4: Use single completion vector after NOP failure
  net/mlx4_en: Set correct port parameters during device initialization
  ipheth: add support for iPad
  caif-hsi: Add missing return in error path
  caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost
  caif: Clear shutdown mask to zero at reconnect.
  tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request()
  ipv6: fib: fix fib dump restart
  batman-adv: fix race condition in TT full-table replacement
  batman-adv: only drop packets of known wifi clients
  ...

drivers/bluetooth/ath3k.c

@@ -63,6 +63,7 @@ static struct usb_device_id ath3k_table[] = {
 
 	/* Atheros AR3011 with sflash firmware*/
 	{ USB_DEVICE(0x0CF3, 0x3002) },
+	{ USB_DEVICE(0x0CF3, 0xE019) },
 	{ USB_DEVICE(0x13d3, 0x3304) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
@@ -77,6 +78,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x3005) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
+	{ USB_DEVICE(0x0930, 0x0219) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -101,6 +103,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btmrvl_drv.h

@@ -136,7 +136,7 @@ int btmrvl_remove_card(struct btmrvl_private *priv);
 
 void btmrvl_interrupt(struct btmrvl_private *priv);
 
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
 int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
 
 int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);

drivers/bluetooth/btmrvl_main.c

@@ -44,23 +44,33 @@ void btmrvl_interrupt(struct btmrvl_private *priv)
 }
 EXPORT_SYMBOL_GPL(btmrvl_interrupt);
 
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 {
 	struct hci_event_hdr *hdr = (void *) skb->data;
 	struct hci_ev_cmd_complete *ec;
-	u16 opcode, ocf;
+	u16 opcode, ocf, ogf;
 
 	if (hdr->evt == HCI_EV_CMD_COMPLETE) {
 		ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
 		opcode = __le16_to_cpu(ec->opcode);
 		ocf = hci_opcode_ocf(opcode);
+		ogf = hci_opcode_ogf(opcode);
+
 		if (ocf == BT_CMD_MODULE_CFG_REQ &&
 					priv->btmrvl_dev.sendcmdflag) {
 			priv->btmrvl_dev.sendcmdflag = false;
 			priv->adapter->cmd_complete = true;
 			wake_up_interruptible(&priv->adapter->cmd_wait_q);
 		}
+
+		if (ogf == OGF) {
+			BT_DBG("vendor event skipped: ogf 0x%4.4x", ogf);
+			kfree_skb(skb);
+			return false;
+		}
 	}
+
+	return true;
 }
 EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt);
 

drivers/bluetooth/btmrvl_sdio.c

@@ -562,10 +562,12 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
 		skb_put(skb, buf_len);
 		skb_pull(skb, SDIO_HEADER_LEN);
 
-		if (type == HCI_EVENT_PKT)
-			btmrvl_check_evtpkt(priv, skb);
+		if (type == HCI_EVENT_PKT) {
+			if (btmrvl_check_evtpkt(priv, skb))
+				hci_recv_frame(skb);
+		} else
+			hci_recv_frame(skb);
 
-		hci_recv_frame(skb);
 		hdev->stat.byte_rx += buf_len;
 		break;
 

drivers/bluetooth/btusb.c

@@ -125,6 +125,7 @@ static struct usb_device_id blacklist_table[] = {
 
 	/* Atheros 3011 with sflash firmware */
 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
@@ -139,6 +140,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },

drivers/net/bonding/bond_procfs.c

@@ -150,14 +150,25 @@ static void bond_info_show_master(struct seq_file *seq)
 	}
 }
 
+static const char *bond_slave_link_status(s8 link)
+{
+	static const char * const status[] = {
+		[BOND_LINK_UP] = "up",
+		[BOND_LINK_FAIL] = "going down",
+		[BOND_LINK_DOWN] = "down",
+		[BOND_LINK_BACK] = "going back",
+	};
+
+	return status[link];
+}
+
 static void bond_info_show_slave(struct seq_file *seq,
 				 const struct slave *slave)
 {
 	struct bonding *bond = seq->private;
 
 	seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
-	seq_printf(seq, "MII Status: %s\n",
-		   (slave->link == BOND_LINK_UP) ?  "up" : "down");
+	seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link));
 	if (slave->speed == SPEED_UNKNOWN)
 		seq_printf(seq, "Speed: %s\n", "Unknown");
 	else

drivers/net/caif/caif_hsi.c

@@ -693,8 +693,6 @@ static void cfhsi_rx_done(struct cfhsi *cfhsi)
 			 */
 			memcpy(rx_buf, (u8 *)piggy_desc,
 					CFHSI_DESC_SHORT_SZ);
-			/* Mark no embedded frame here */
-			piggy_desc->offset = 0;
 			if (desc_pld_len == -EPROTO)
 				goto out_of_sync;
 		}
@@ -737,6 +735,8 @@ static void cfhsi_rx_done(struct cfhsi *cfhsi)
 			/* Extract any payload in piggyback descriptor. */
 			if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0)
 				goto out_of_sync;
+			/* Mark no embedded frame after extracting it */
+			piggy_desc->offset = 0;
 		}
 	}
 
@@ -1178,6 +1178,7 @@ int cfhsi_probe(struct platform_device *pdev)
 		dev_err(&ndev->dev, "%s: Registration error: %d.\n",
 			__func__, res);
 		free_netdev(ndev);
+		return -ENODEV;
 	}
 	/* Add CAIF HSI device to list. */
 	spin_lock(&cfhsi_list_lock);

drivers/net/can/c_can/c_can.c

@@ -590,8 +590,8 @@ static void c_can_chip_config(struct net_device *dev)
 	priv->write_reg(priv, &priv->regs->control,
 			CONTROL_ENABLE_AR);
 
-	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY &
-					CAN_CTRLMODE_LOOPBACK)) {
+	if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
+	    (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
 		/* loopback + silent mode : useful for hot self-test */
 		priv->write_reg(priv, &priv->regs->control, CONTROL_EIE |
 				CONTROL_SIE | CONTROL_IE | CONTROL_TEST);

drivers/net/can/flexcan.c

@@ -939,12 +939,12 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
 		return PTR_ERR(pinctrl);
 
 	if (pdev->dev.of_node) {
-		const u32 *clock_freq_p;
+		const __be32 *clock_freq_p;
 
 		clock_freq_p = of_get_property(pdev->dev.of_node,
 						"clock-frequency", NULL);
 		if (clock_freq_p)
-			clock_freq = *clock_freq_p;
+			clock_freq = be32_to_cpup(clock_freq_p);
 	}
 
 	if (!clock_freq) {

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -190,7 +190,7 @@ int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata)
 
 		if ((netif_tx_queue_stopped(txq)) &&
 		    (bp->state == BNX2X_STATE_OPEN) &&
-		    (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
+		    (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4))
 			netif_tx_wake_queue(txq);
 
 		__netif_tx_unlock(txq);
@@ -2516,8 +2516,6 @@ int bnx2x_poll(struct napi_struct *napi, int budget)
 /* we split the first BD into headers and data BDs
  * to ease the pain of our fellow microcode engineers
  * we use one mapping for both BDs
- * So far this has only been observed to happen
- * in Other Operating Systems(TM)
  */
 static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
 				   struct bnx2x_fp_txdata *txdata,
@@ -3171,7 +3169,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	txdata->tx_bd_prod += nbd;
 
-	if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
+	if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) {
 		netif_tx_stop_queue(txq);
 
 		/* paired memory barrier is in bnx2x_tx_int(), we have to keep
@@ -3180,7 +3178,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		smp_mb();
 
 		fp->eth_q_stats.driver_xoff++;
-		if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
+		if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)
 			netif_tx_wake_queue(txq);
 	}
 	txdata->tx_pkt++;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

@@ -40,6 +40,7 @@
 #define I2C_BSC0			0
 #define I2C_BSC1			1
 #define I2C_WA_RETRY_CNT		3
+#define I2C_WA_PWR_ITER			(I2C_WA_RETRY_CNT - 1)
 #define MCPR_IMC_COMMAND_READ_OP	1
 #define MCPR_IMC_COMMAND_WRITE_OP	2
 
@@ -7659,6 +7660,28 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 	return -EINVAL;
 }
 
+static void bnx2x_warpcore_power_module(struct link_params *params,
+					struct bnx2x_phy *phy,
+					u8 power)
+{
+	u32 pin_cfg;
+	struct bnx2x *bp = params->bp;
+
+	pin_cfg = (REG_RD(bp, params->shmem_base +
+			  offsetof(struct shmem_region,
+			dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
+			PORT_HW_CFG_E3_PWR_DIS_MASK) >>
+			PORT_HW_CFG_E3_PWR_DIS_SHIFT;
+
+	if (pin_cfg == PIN_CFG_NA)
+		return;
+	DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
+		       power, pin_cfg);
+	/* Low ==> corresponding SFP+ module is powered
+	 * high ==> the SFP+ module is powered down
+	 */
+	bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
+}
 static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 						 struct link_params *params,
 						 u16 addr, u8 byte_cnt,
@@ -7678,6 +7701,12 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 	/* 4 byte aligned address */
 	addr32 = addr & (~0x3);
 	do {
+		if (cnt == I2C_WA_PWR_ITER) {
+			bnx2x_warpcore_power_module(params, phy, 0);
+			/* Note that 100us are not enough here */
+			usleep_range(1000,1000);
+			bnx2x_warpcore_power_module(params, phy, 1);
+		}
 		rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
 				    data_array);
 	} while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT));
@@ -8200,29 +8229,6 @@ static void bnx2x_set_sfp_module_fault_led(struct link_params *params,
 		bnx2x_set_e1e2_module_fault_led(params, gpio_mode);
 }
 
-static void bnx2x_warpcore_power_module(struct link_params *params,
-					struct bnx2x_phy *phy,
-					u8 power)
-{
-	u32 pin_cfg;
-	struct bnx2x *bp = params->bp;
-
-	pin_cfg = (REG_RD(bp, params->shmem_base +
-			  offsetof(struct shmem_region,
-			dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
-			PORT_HW_CFG_E3_PWR_DIS_MASK) >>
-			PORT_HW_CFG_E3_PWR_DIS_SHIFT;
-
-	if (pin_cfg == PIN_CFG_NA)
-		return;
-	DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
-		       power, pin_cfg);
-	/* Low ==> corresponding SFP+ module is powered
-	 * high ==> the SFP+ module is powered down
-	 */
-	bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
-}
-
 static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy,
 				    struct link_params *params)
 {
@@ -9748,7 +9754,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
 
 	msleep(1);
 
-	if (!(CHIP_IS_E1(bp)))
+	if (!(CHIP_IS_E1x(bp)))
 		port = BP_PATH(bp);
 	else
 		port = params->port;

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -122,15 +122,15 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
 			goto done;
 
 		if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
-			dev_warn(&adapter->pdev->dev, "This domain(VM) is not "
-				"permitted to execute this cmd (opcode %d)\n",
-				opcode);
+			dev_warn(&adapter->pdev->dev,
+				 "opcode %d-%d is not permitted\n",
+				 opcode, subsystem);
 		} else {
 			extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
 					CQE_STATUS_EXTD_MASK;
-			dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:"
-				"status %d, extd-status %d\n",
-				opcode, compl_status, extd_status);
+			dev_err(&adapter->pdev->dev,
+				"opcode %d-%d failed:status %d-%d\n",
+				opcode, subsystem, compl_status, extd_status);
 		}
 	}
 done:

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -1566,7 +1566,7 @@ struct be_hw_stats_v1 {
 	u32 rsvd0[BE_TXP_SW_SZ];
 	struct be_erx_stats_v1 erx;
 	struct be_pmem_stats pmem;
-	u32 rsvd1[3];
+	u32 rsvd1[18];
 };
 
 struct be_cmd_req_get_stats_v1 {

drivers/net/ethernet/emulex/benet/be_main.c

@@ -3237,7 +3237,7 @@ static void be_netdev_init(struct net_device *netdev)
 
 	netdev->flags |= IFF_MULTICAST;
 
-	netif_set_gso_max_size(netdev, 65535);
+	netif_set_gso_max_size(netdev, 65535 - ETH_HLEN);
 
 	netdev->netdev_ops = &be_netdev_ops;
 

drivers/net/ethernet/intel/Kconfig

@@ -122,8 +122,10 @@ config IGB_DCA
 
 config IGB_PTP
 	bool "PTP Hardware Clock (PHC)"
-	default y
-	depends on IGB && PTP_1588_CLOCK
+	default n
+	depends on IGB && EXPERIMENTAL
+	select PPS
+	select PTP_1588_CLOCK
 	---help---
 	  Say Y here if you want to use PTP Hardware Clock (PHC) in the
 	  driver.  Only the basic clock operations have been implemented.
@@ -223,7 +225,9 @@ config IXGBE_DCB
 config IXGBE_PTP
 	bool "PTP Clock Support"
 	default n
-	depends on IXGBE && PTP_1588_CLOCK
+	depends on IXGBE && EXPERIMENTAL
+	select PPS
+	select PTP_1588_CLOCK
 	---help---
 	  Say Y here if you want support for 1588 Timestamping with a
 	  PHC device, using the PTP 1588 Clock support. This is

drivers/net/ethernet/intel/igb/e1000_82575.c

@@ -206,8 +206,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 		mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
 		break;
 	case e1000_i350:
-	case e1000_i210:
-	case e1000_i211:
 		mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
 		break;
 	default:

drivers/net/ethernet/intel/ixgbe/ixgbe.h

@@ -196,7 +196,7 @@ enum ixgbe_ring_state_t {
 	__IXGBE_HANG_CHECK_ARMED,
 	__IXGBE_RX_RSC_ENABLED,
 	__IXGBE_RX_CSUM_UDP_ZERO_ERR,
-	__IXGBE_RX_FCOE_BUFSZ,
+	__IXGBE_RX_FCOE,
 };
 
 #define check_for_tx_hang(ring) \
@@ -290,7 +290,7 @@ struct ixgbe_ring_feature {
 #if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192)
 static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring)
 {
-	return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0;
+	return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0;
 }
 #else
 #define ixgbe_rx_pg_order(_ring) 0