ARM: remove sirf prima2/atlas platforms

The SiRF Prima2 and Atlas platform code was contributed by Cambridge
Silicon Radio (CSR) after aquiring the original SiRF company, and
maintained by Barry Song. CSR was subsequently acquired by Qualcomm,
who no longer have an interest in maintaining the SoC platform but
instead have released more recent SoCs for the same market in the
Snapdragon family.

As Barry is no longer working for the company, nobody else there
wants to maintain it, and there are no third-party users, the
best way forward seems to be to completely remove it.

Thanks to Barry for maintaining the platform for the past ten years.

Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/lkml/c969392572604b98bcb3be44048c3165@hisilicon.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -1779,19 +1779,6 @@ F:	drivers/net/ethernet/cortina/
 F:	drivers/pinctrl/pinctrl-gemini.c
 F:	drivers/rtc/rtc-ftrtc010.c
 
-ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
-M:	Barry Song <baohua@kernel.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
-F:	arch/arm/boot/dts/prima2*
-F:	arch/arm/mach-prima2/
-F:	drivers/clk/sirf/
-F:	drivers/clocksource/timer-atlas7.c
-F:	drivers/clocksource/timer-prima2.c
-X:	drivers/gnss
-N:	[^a-z]sirf
-
 ARM/CZ.NIC TURRIS MOX SUPPORT
 M:	Marek Behun <marek.behun@nic.cz>
 S:	Maintained

arch/arm/Kconfig

@@ -671,8 +671,6 @@ source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/mach-oxnas/Kconfig"
 
-source "arch/arm/mach-prima2/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
 source "arch/arm/plat-pxa/Kconfig"
 

arch/arm/Kconfig.debug

@@ -1142,32 +1142,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A31/A23 based platforms on the R_UART.
 
-	config DEBUG_SIRFPRIMA2_UART1
-		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
-		depends on ARCH_PRIMA2
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFprimaII devices.
-
-	config DEBUG_SIRFATLAS7_UART0
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
-		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
-		  debug port can be very useful.
-
-	config DEBUG_SIRFATLAS7_UART1
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFATLAS7 devices.
-
 	config DEBUG_SPEAR3XX
 		bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
 		depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
@@ -1538,10 +1512,6 @@ config DEBUG_STM32_UART
 	bool
 	depends on ARCH_STM32
 
-config DEBUG_SIRFSOC_UART
-	bool
-	depends on ARCH_SIRF
-
 config DEBUG_UART_FLOW_CONTROL
 	bool "Enable flow control (CTS) for the debug UART"
 	depends on DEBUG_LL
@@ -1596,7 +1566,6 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
 	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
-	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
 	default "debug/sti.S" if DEBUG_STI_UART
 	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1648,8 +1617,6 @@ config DEBUG_UART_PHYS
 	default 0x1600d000 if DEBUG_SD5203_UART
 	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x18000400 if DEBUG_BCM_HR2
-	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
-	default 0x18020000 if DEBUG_SIRFATLAS7_UART1
 	default 0x18023000 if DEBUG_BCM_IPROC_UART3
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0x20001000 if DEBUG_HIP01_UART
@@ -1695,7 +1662,6 @@ config DEBUG_UART_PHYS
 	default 0x80074000 if DEBUG_IMX28_UART
 	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
 	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
@@ -1754,7 +1720,7 @@ config DEBUG_UART_PHYS
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART || DEBUG_STM32_UART
 
 config DEBUG_UART_VIRT
@@ -1836,10 +1802,7 @@ config DEBUG_UART_VIRT
 	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
 	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
-	default 0xfec20000 if DEBUG_SIRFATLAS7_UART1
-	default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
 	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
@@ -1863,7 +1826,7 @@ config DEBUG_UART_VIRT
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART || DEBUG_STM32_UART
 
 config DEBUG_UART_8250_SHIFT

arch/arm/Makefile

@@ -209,7 +209,6 @@ machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
-machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32

arch/arm/boot/dts/Makefile

@@ -74,10 +74,6 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d4_xplained.dtb \
 	at91-sama5d4ek.dtb \
 	at91-vinco.dtb
-dtb-$(CONFIG_ARCH_ATLAS6) += \
-	atlas6-evb.dtb
-dtb-$(CONFIG_ARCH_ATLAS7) += \
-	atlas7-evb.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
@@ -886,8 +882,6 @@ dtb-$(CONFIG_ARCH_ACTIONS) += \
 	owl-s500-labrador-base-m.dtb \
 	owl-s500-roseapplepi.dtb \
 	owl-s500-sparky.dtb
-dtb-$(CONFIG_ARCH_PRIMA2) += \
-	prima2-evb.dtb
 dtb-$(CONFIG_ARCH_PXA) += \
 	pxa300-raumfeld-connector.dtb \
 	pxa300-raumfeld-controller.dtb \