Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Documentation/serial/driver

@@ -214,12 +214,13 @@ hardware.
 	The interaction of the iflag bits is as follows (parity error
 	given as an example):
 	Parity error	INPCK	IGNPAR
-	None		n/a	n/a	character received
-	Yes		n/a	0	character discarded
-	Yes		0	1	character received, marked as
+	n/a		0	n/a	character received, marked as
 					TTY_NORMAL
-	Yes		1	1	character received, marked as
+	None		1	n/a	character received, marked as
+					TTY_NORMAL
+	Yes		1	0	character received, marked as
 					TTY_PARITY
+	Yes		1	1	character discarded
 
 	Other flags may be used (eg, xon/xoff characters) if your
 	hardware supports hardware "soft" flow control.

MAINTAINERS

@@ -568,6 +568,18 @@ L:	linuxppc-dev@ozlabs.org
 W:	http://www.penguinppc.org/ppc64/
 S:	Supported
 
+BROADCOM BNX2 GIGABIT ETHERNET DRIVER
+P:	Michael Chan
+M:	mchan@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
+BROADCOM TG3 GIGABIT ETHERNET DRIVER
+P:	Michael Chan
+M:	mchan@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
 BTTV VIDEO4LINUX DRIVER
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org
@@ -1877,6 +1889,11 @@ L:	linux-kernel@vger.kernel.org
 W:	http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
 S:	Maintained
 
+MULTIMEDIA CARD SUBSYSTEM
+P:	Russell King
+M:	rmk+mmc@arm.linux.org.uk
+S:	Maintained
+
 MULTISOUND SOUND DRIVER
 P:	Andrew Veliath
 M:	andrewtv@usa.net

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 17
-EXTRAVERSION =-rc5
-NAME=Lordi Rules
+EXTRAVERSION =-rc6
+NAME=Crazed Snow-Weasel
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/alpha/kernel/alpha_ksyms.c

@@ -182,7 +182,6 @@ EXPORT_SYMBOL(smp_num_cpus);
 EXPORT_SYMBOL(smp_call_function);
 EXPORT_SYMBOL(smp_call_function_on_cpu);
 EXPORT_SYMBOL(_atomic_dec_and_lock);
-EXPORT_SYMBOL(cpu_present_mask);
 #endif /* CONFIG_SMP */
 
 /*

arch/alpha/kernel/process.c

@@ -94,7 +94,7 @@ common_shutdown_1(void *generic_ptr)
 	if (cpuid != boot_cpuid) {
 		flags |= 0x00040000UL; /* "remain halted" */
 		*pflags = flags;
-		clear_bit(cpuid, &cpu_present_mask);
+		cpu_clear(cpuid, cpu_present_map);
 		halt();
 	}
 #endif
@@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
 
 #ifdef CONFIG_SMP
 	/* Wait for the secondaries to halt. */
-	cpu_clear(boot_cpuid, cpu_possible_map);
-	while (cpus_weight(cpu_possible_map))
+	cpu_clear(boot_cpuid, cpu_present_map);
+	while (cpus_weight(cpu_present_map))
 		barrier();
 #endif
 

arch/alpha/kernel/smp.c

@@ -68,7 +68,6 @@ enum ipi_message_type {
 static int smp_secondary_alive __initdata = 0;
 
 /* Which cpus ids came online.  */
-cpumask_t cpu_present_mask;
 cpumask_t cpu_online_map;
 
 EXPORT_SYMBOL(cpu_online_map);
@@ -439,7 +438,7 @@ setup_smp(void)
 			if ((cpu->flags & 0x1cc) == 0x1cc) {
 				smp_num_probed++;
 				/* Assume here that "whami" == index */
-				cpu_set(i, cpu_present_mask);
+				cpu_set(i, cpu_present_map);
 				cpu->pal_revision = boot_cpu_palrev;
 			}
 
@@ -450,11 +449,10 @@ setup_smp(void)
 		}
 	} else {
 		smp_num_probed = 1;
-		cpu_set(boot_cpuid, cpu_present_mask);
 	}
 
-	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
-	       smp_num_probed, cpu_possible_map.bits[0]);
+	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n",
+	       smp_num_probed, cpu_present_map.bits[0]);
 }
 
 /*
@@ -473,7 +471,7 @@ smp_prepare_cpus(unsigned int max_cpus)
 
 	/* Nothing to do on a UP box, or when told not to.  */
 	if (smp_num_probed == 1 || max_cpus == 0) {
-		cpu_present_mask = cpumask_of_cpu(boot_cpuid);
+		cpu_present_map = cpumask_of_cpu(boot_cpuid);
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		return;
 	}
@@ -486,10 +484,6 @@ smp_prepare_cpus(unsigned int max_cpus)
 void __devinit
 smp_prepare_boot_cpu(void)
 {
-	/*
-	 * Mark the boot cpu (current cpu) as online
-	 */ 
-	cpu_set(smp_processor_id(), cpu_online_map);
 }
 
 int __devinit

arch/alpha/kernel/sys_titan.c

@@ -66,7 +66,7 @@ titan_update_irq_hw(unsigned long mask)
 	register int bcpu = boot_cpuid;
 
 #ifdef CONFIG_SMP
-	cpumask_t cpm = cpu_present_mask;
+	cpumask_t cpm = cpu_present_map;
 	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
 	unsigned long mask0, mask1, mask2, mask3, dummy;
 

arch/arm/Kconfig.debug

@@ -101,7 +101,7 @@ config DEBUG_S3C2410_UART
 	help
 	  Choice for UART for kernel low-level using S3C2410 UARTS,
 	  should be between zero and two. The port must have been
-	  initalised by the boot-loader before use.
+	  initialised by the boot-loader before use.
 
 	  The uncompressor code port configuration is now handled
 	  by CONFIG_S3C2410_LOWLEVEL_UART_PORT.

arch/arm/mach-ixp23xx/core.c

@@ -178,8 +178,12 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 
 static void ixp23xx_irq_mask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
 
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg &= ~(1 << (irq % 32));
 }
 
@@ -199,17 +203,25 @@ static void ixp23xx_irq_ack(unsigned int irq)
  */
 static void ixp23xx_irq_level_unmask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
 
 	ixp23xx_irq_ack(irq);
 
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg |= (1 << (irq % 32));
 }
 
 static void ixp23xx_irq_edge_unmask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
+
+	if (irq >= 56)
+		irq += 8;
 
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg |= (1 << (irq % 32));
 }
 

arch/arm/mach-ixp4xx/Kconfig

@@ -141,7 +141,7 @@ config IXP4XX_INDIRECT_PCI
           2) If > 64MB of memory space is required, the IXP4xx can be 
 	     configured to use indirect registers to access PCI This allows 
 	     for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-	     The disadvantadge of this is that every PCI access requires 
+	     The disadvantage of this is that every PCI access requires 
 	     three local register accesses plus a spinlock, but in some 
 	     cases the performance hit is acceptable. In addition, you cannot 
 	     mmap() PCI devices in this case due to the indirect nature

arch/arm/mach-pxa/mainstone.c

@@ -493,6 +493,7 @@ static void __init mainstone_map_io(void)
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
 	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
 	.init_irq	= mainstone_init_irq,

arch/arm/mach-s3c2410/Kconfig

@@ -170,7 +170,7 @@ config S3C2410_PM_DEBUG
 	depends on ARCH_S3C2410 && PM
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
 config S3C2410_PM_CHECK

arch/arm/mm/mm-armv.c

@@ -376,7 +376,7 @@ void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
-	if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
+	if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			if (mem_types[i].prot_l1)
 				mem_types[i].prot_l1 |= PMD_BIT4;
@@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode)
 		pgd = init_mm.pgd;
 
 	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
 		base_pmdval |= PMD_BIT4;
 
 	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {