Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (34 commits)
  V4L/DVB (10173): Missing v4l2_prio_close in radio_release
  V4L/DVB (10172): add DVB_DEVICE_TYPE= to uevent
  V4L/DVB (10171): Use usb_set_intfdata
  V4L/DVB (10170): tuner-simple: prevent possible OOPS caused by divide by zero error
  V4L/DVB (10168): sms1xxx: fix inverted gpio for lna control on tiger r2
  V4L/DVB (10167): sms1xxx: add support for inverted gpio
  V4L/DVB (10166): dvb frontend: stop using non-C99 compliant comments
  V4L/DVB (10165): Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2
  V4L/DVB (10164): Add missing S2 caps flag to S2API
  V4L/DVB (10163): em28xx: allocate adev together with struct em28xx dev
  V4L/DVB (10162): tuner-simple: Fix tuner type set message
  V4L/DVB (10161): saa7134: fix autodetection for AVer TV GO 007 FM Plus
  V4L/DVB (10160): em28xx: update chip id for em2710
  V4L/DVB (10157): Add USB ID for the Sil4701 radio from DealExtreme
  V4L/DVB (10156): saa7134: Add support for Avermedia AVer TV GO 007 FM Plus
  V4L/DVB (10155): Add TEA5764 radio driver
  V4L/DVB (10154): saa7134: fix a merge conflict on Behold H6 board
  V4L/DVB (10153): Add the Beholder H6 card to DVB-T part of sources.
  V4L/DVB (10152): Change configuration of the Beholder H6 card
  V4L/DVB (10151): Fix I2C bridge error in zl10353
  ...

Documentation/video4linux/CARDLIST.saa7134

@@ -152,3 +152,4 @@
 151 -> ADS Tech Instant HDTV                    [1421:0380]
 152 -> Asus Tiger Rev:1.00                      [1043:4857]
 153 -> Kworld Plus TV Analog Lite PCI           [17de:7128]
+154 -> Avermedia AVerTV GO 007 FM Plus          [1461:f31d]

Documentation/video4linux/si470x.txt

@@ -41,6 +41,7 @@ chips are known to work:
 - 10c4:818a: Silicon Labs USB FM Radio Reference Design
 - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
 - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
+- 10c5:819a: DealExtreme USB Radio
 
 
 Software

Documentation/video4linux/v4l2-framework.txt

@@ -184,7 +184,7 @@ may be NULL if the subdev driver does not support anything from that category.
 It looks like this:
 
 struct v4l2_subdev_core_ops {
-	int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip);
+	int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
 	int (*log_status)(struct v4l2_subdev *sd);
 	int (*init)(struct v4l2_subdev *sd, u32 val);
 	...
@@ -390,16 +390,18 @@ allocated memory.
 
 You should also set these fields:
 
-- parent: set to the parent device (same device as was used to register
-  v4l2_device).
+- v4l2_dev: set to the v4l2_device parent device.
 - name: set to something descriptive and unique.
-- fops: set to the file_operations struct.
+- fops: set to the v4l2_file_operations struct.
 - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance
   (highly recommended to use this and it might become compulsory in the
   future!), then set this to your v4l2_ioctl_ops struct.
 
-If you use v4l2_ioctl_ops, then you should set .unlocked_ioctl to
-__video_ioctl2 or .ioctl to video_ioctl2 in your file_operations struct.
+If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or
+.ioctl to video_ioctl2 in your v4l2_file_operations struct.
+
+The v4l2_file_operations struct is a subset of file_operations. The main
+difference is that the inode argument is omitted since it is never used.
 
 
 video_device registration
@@ -410,7 +412,7 @@ for you.
 
 	err = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
 	if (err) {
-		video_device_release(vdev); // or kfree(my_vdev);
+		video_device_release(vdev); /* or kfree(my_vdev); */
 		return err;
 	}
 
@@ -516,5 +518,4 @@ void *video_drvdata(struct file *file);
 
 You can go from a video_device struct to the v4l2_device struct using:
 
-struct v4l2_device *v4l2_dev = dev_get_drvdata(vdev->parent);
-
+struct v4l2_device *v4l2_dev = vdev->v4l2_dev;

drivers/media/common/saa7146_fops.c

@@ -192,17 +192,17 @@ void saa7146_buffer_timeout(unsigned long data)
 /********************************************************************************/
 /* file operations */
 
-static int fops_open(struct inode *inode, struct file *file)
+static int fops_open(struct file *file)
 {
-	unsigned int minor = iminor(inode);
+	unsigned int minor = video_devdata(file)->minor;
 	struct saa7146_dev *h = NULL, *dev = NULL;
 	struct list_head *list;
 	struct saa7146_fh *fh = NULL;
 	int result = 0;
 
 	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
-	DEB_EE(("inode:%p, file:%p, minor:%d\n",inode,file,minor));
+	DEB_EE(("file:%p, minor:%d\n", file, minor));
 
 	if (mutex_lock_interruptible(&saa7146_devices_lock))
 		return -ERESTARTSYS;
@@ -255,7 +255,7 @@ static int fops_open(struct inode *inode, struct file *file)
 		if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
 			result = saa7146_vbi_uops.open(dev,file);
 		if (dev->ext_vv_data->vbi_fops.open)
-			dev->ext_vv_data->vbi_fops.open(inode, file);
+			dev->ext_vv_data->vbi_fops.open(file);
 	} else {
 		DEB_S(("initializing video...\n"));
 		result = saa7146_video_uops.open(dev,file);
@@ -280,12 +280,12 @@ static int fops_open(struct inode *inode, struct file *file)
 	return result;
 }
 
-static int fops_release(struct inode *inode, struct file *file)
+static int fops_release(struct file *file)
 {
 	struct saa7146_fh  *fh  = file->private_data;
 	struct saa7146_dev *dev = fh->dev;
 
-	DEB_EE(("inode:%p, file:%p\n",inode,file));
+	DEB_EE(("file:%p\n", file));
 
 	if (mutex_lock_interruptible(&saa7146_devices_lock))
 		return -ERESTARTSYS;
@@ -294,7 +294,7 @@ static int fops_release(struct inode *inode, struct file *file)
 		if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
 			saa7146_vbi_uops.release(dev,file);
 		if (dev->ext_vv_data->vbi_fops.release)
-			dev->ext_vv_data->vbi_fops.release(inode, file);
+			dev->ext_vv_data->vbi_fops.release(file);
 	} else {
 		saa7146_video_uops.release(dev,file);
 	}
@@ -308,10 +308,10 @@ static int fops_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int fops_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long fops_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 /*
-	DEB_EE(("inode:%p, file:%p, cmd:%d, arg:%li\n",inode, file, cmd, arg));
+	DEB_EE(("file:%p, cmd:%d, arg:%li\n", file, cmd, arg));
 */
 	return video_usercopy(file, cmd, arg, saa7146_video_do_ioctl);
 }
@@ -416,7 +416,7 @@ static ssize_t fops_write(struct file *file, const char __user *data, size_t cou
 	}
 }
 
-static const struct file_operations video_fops =
+static const struct v4l2_file_operations video_fops =
 {
 	.owner		= THIS_MODULE,
 	.open		= fops_open,
@@ -426,7 +426,6 @@ static const struct file_operations video_fops =
 	.poll		= fops_poll,
 	.mmap		= fops_mmap,
 	.ioctl		= fops_ioctl,
-	.llseek		= no_llseek,
 };
 
 static void vv_callback(struct saa7146_dev *dev, unsigned long status)

drivers/media/common/saa7146_video.c

@@ -834,13 +834,14 @@ static int video_end(struct saa7146_fh *fh, struct file *file)
  * copying is done already, arg is a kernel pointer.
  */
 
-int saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 {
 	struct saa7146_fh *fh  = file->private_data;
 	struct saa7146_dev *dev = fh->dev;
 	struct saa7146_vv *vv = dev->vv_data;
 
-	int err = 0, result = 0, ee = 0;
+	long err = 0;
+	int result = 0, ee = 0;
 
 	struct saa7146_use_ops *ops;
 	struct videobuf_queue *q;

drivers/media/common/tuners/tuner-simple.c

@@ -820,6 +820,15 @@ static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf,
 	int ret;
 	unsigned frequency = params->frequency / 62500;
 
+	if (!tun->stepsize) {
+		/* tuner-core was loaded before the digital tuner was
+		 * configured and somehow picked the wrong tuner type */
+		tuner_err("attempt to treat tuner %d (%s) as digital tuner "
+			  "without stepsize defined.\n",
+			  priv->type, priv->tun->name);
+		return 0; /* failure */
+	}
+
 	t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
 	ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
 	if (ret < 0)
@@ -1059,7 +1068,12 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
 	memcpy(&fe->ops.tuner_ops, &simple_tuner_ops,
 	       sizeof(struct dvb_tuner_ops));
 
-	tuner_info("type set to %d (%s)\n", type, priv->tun->name);
+	if (type != priv->type)
+		tuner_warn("couldn't set type to %d. Using %d (%s) instead\n",
+			    type, priv->type, priv->tun->name);
+	else
+		tuner_info("type set to %d (%s)\n",
+			   priv->type, priv->tun->name);
 
 	if ((debug) || ((atv_input[priv->nr] > 0) ||
 			(dtv_input[priv->nr] > 0))) {

drivers/media/dvb/dvb-core/dvbdev.c

@@ -436,8 +436,9 @@ static int dvb_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct dvb_device *dvbdev = dev_get_drvdata(dev);
 
-	add_uevent_var(env, "DVB_DEVICE_NUM=%d", dvbdev->id);
 	add_uevent_var(env, "DVB_ADAPTER_NUM=%d", dvbdev->adapter->num);
+	add_uevent_var(env, "DVB_DEVICE_TYPE=%s", dnames[dvbdev->type]);
+	add_uevent_var(env, "DVB_DEVICE_NUM=%d", dvbdev->id);
 	return 0;
 }
 

drivers/media/dvb/dvb-usb/gp8psk.c

@@ -187,7 +187,7 @@ int gp8psk_bcm4500_reload(struct dvb_usb_device *d)
 	/* load BCM4500 firmware */
 	if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
 		if (gp8psk_load_bcm4500fw(d))
-			return EINVAL;
+			return -EINVAL;
 	return 0;
 }
 

drivers/media/dvb/frontends/cx24116.c

@@ -1463,6 +1463,7 @@ static struct dvb_frontend_ops cx24116_ops = {
 			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
 			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
 			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_2G_MODULATION |
 			FE_CAN_QPSK | FE_CAN_RECOVER
 	},
 

drivers/media/dvb/frontends/cx24116.h

@@ -37,7 +37,8 @@ struct cx24116_config {
 	u8 mpg_clk_pos_pol:0x02;
 };
 
-#if defined(CONFIG_DVB_CX24116) || defined(CONFIG_DVB_CX24116_MODULE)
+#if defined(CONFIG_DVB_CX24116) || \
+	(defined(CONFIG_DVB_CX24116_MODULE) && defined(MODULE))
 extern struct dvb_frontend *cx24116_attach(
 	const struct cx24116_config *config,
 	struct i2c_adapter *i2c);

drivers/media/dvb/frontends/stb0899_drv.c

@@ -1618,6 +1618,7 @@ static struct dvb_frontend_ops stb0899_ops = {
 
 		.caps 			= FE_CAN_INVERSION_AUTO	|
 					  FE_CAN_FEC_AUTO	|
+					  FE_CAN_2G_MODULATION	|
 					  FE_CAN_QPSK
 	},
 

drivers/media/dvb/frontends/zl10353.c

@@ -587,8 +587,15 @@ static int zl10353_init(struct dvb_frontend *fe)
 
 static int zl10353_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
 {
+	struct zl10353_state *state = fe->demodulator_priv;
 	u8 val = 0x0a;
 
+	if (state->config.no_tuner) {
+		/* No tuner attached to the internal I2C bus */
+		/* If set enable I2C bridge, the main I2C bus stopped hardly */
+		return 0;
+	}
+
 	if (enable)
 		val |= 0x10;
 

drivers/media/dvb/siano/sms-cards.c

@@ -120,7 +120,7 @@ static struct sms_board sms_boards[] = {
 		.name	= "Hauppauge WinTV MiniCard",
 		.type	= SMS_NOVA_B0,
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
-		.lna_ctrl  = 1,
+		.lna_ctrl  = -1,
 	},
 };
 
@@ -131,9 +131,10 @@ struct sms_board *sms_get_board(int id)
 	return &sms_boards[id];
 }
 
-static int sms_set_gpio(struct smscore_device_t *coredev, u32 pin, int enable)
+static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable)
 {
-	int ret;
+	int lvl, ret;
+	u32 gpio;
 	struct smscore_gpio_config gpioconfig = {
 		.direction            = SMS_GPIO_DIRECTION_OUTPUT,
 		.pullupdown           = SMS_GPIO_PULLUPDOWN_NONE,
@@ -145,12 +146,20 @@ static int sms_set_gpio(struct smscore_device_t *coredev, u32 pin, int enable)
 	if (pin == 0)
 		return -EINVAL;
 
-	ret = smscore_configure_gpio(coredev, pin, &gpioconfig);
+	if (pin < 0) {
+		/* inverted gpio */
+		gpio = pin * -1;
+		lvl = enable ? 0 : 1;
+	} else {
+		gpio = pin;
+		lvl = enable ? 1 : 0;
+	}
 
+	ret = smscore_configure_gpio(coredev, gpio, &gpioconfig);
 	if (ret < 0)
 		return ret;
 
-	return smscore_set_gpio(coredev, pin, enable);
+	return smscore_set_gpio(coredev, gpio, lvl);
 }
 
 int sms_board_setup(struct smscore_device_t *coredev)

drivers/media/dvb/ttpci/av7110_v4l.c

@@ -316,7 +316,7 @@ static int av7110_dvb_c_switch(struct saa7146_fh *fh)
 	return 0;
 }
 
-static int av7110_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
+static long av7110_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 {
 	struct saa7146_dev *dev = fh->dev;
 	struct av7110 *av7110 = (struct av7110*) dev->ext_priv;
@@ -567,7 +567,7 @@ static int av7110_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 	return 0;
 }
 
-static int av7110_vbi_reset(struct inode *inode, struct file *file)
+static int av7110_vbi_reset(struct file *file)
 {
 	struct saa7146_fh *fh = file->private_data;
 	struct saa7146_dev *dev = fh->dev;

drivers/media/dvb/ttpci/budget-av.c

@@ -1493,7 +1493,7 @@ static struct saa7146_extension_ioctls ioctls[] = {
 	{0, 0}
 };
 
-static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
+static long av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 {
 	struct saa7146_dev *dev = fh->dev;
 	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;

drivers/media/dvb/ttusb-budget/Kconfig

@@ -1,6 +1,6 @@
 config DVB_TTUSB_BUDGET
 	tristate "Technotrend/Hauppauge Nova-USB devices"
-	depends on DVB_CORE && USB && I2C
+	depends on DVB_CORE && USB && I2C && PCI
 	select DVB_CX22700 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	select DVB_VES1820 if !DVB_FE_CUSTOMISE

drivers/media/dvb/ttusb-dec/Kconfig

@@ -1,6 +1,6 @@
 config DVB_TTUSB_DEC
 	tristate "Technotrend/Hauppauge USB DEC devices"
-	depends on DVB_CORE && USB && INPUT
+	depends on DVB_CORE && USB && INPUT && PCI
 	select CRC32
 	help
 	  Support for external USB adapters designed by Technotrend and

drivers/media/radio/Kconfig

@@ -387,4 +387,23 @@ config USB_MR800
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-mr800.
 
+config RADIO_TEA5764
+	tristate "TEA5764 I2C FM radio support"
+	depends on I2C && VIDEO_V4L2
+	---help---
+	  Say Y here if you want to use the TEA5764 FM chip found in
+	  EZX phones. This FM chip is present in EZX phones from Motorola,
+	  connected to internal pxa I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-tea5764.
+
+config RADIO_TEA5764_XTAL
+	bool "TEA5764 crystal reference"
+	depends on RADIO_TEA5764=y
+	default y
+	help
+	  Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
+	  here if TEA5764 reference frequency is connected in FREQIN.
+
 endif # RADIO_ADAPTERS

drivers/media/radio/Makefile

@@ -19,5 +19,6 @@ obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o
 obj-$(CONFIG_USB_DSBR) += dsbr100.o
 obj-$(CONFIG_USB_SI470X) += radio-si470x.o
 obj-$(CONFIG_USB_MR800) += radio-mr800.o
+obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
 
 EXTRA_CFLAGS += -Isound